Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

ResScan CPAP Reporting Software (OLD version: 5.5) [Archived Discussions]
I have 3.16 installed on my Win 7 64 bit desktop. Is there any advantage to upgrading to 4.1? I am experiencing two annoying glitches in ResScan 3.16 where only part of the radio button is in the window but it does appear to function correctly. It's the sort of thing one sees when there is a driver issue. The first one occurs in the opening patient window and the second in the download window. Is this fixed in 4.1? If I upgrade, how do I transfer saved data from 3.16 to 4.1?

Thanks.
(12-06-2012, 09:36 AM)Tree-Spirit Wrote: Best regards from good old Germany

Welcome Tree-Spirit. Glad you were able to get it working!

Coffee
SuperSleeper
Apnea Board Administrator
www.ApneaBoard.com


INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.



(12-06-2012, 10:35 AM)IDRIck Wrote: I have 3.16 installed on my Win 7 64 bit desktop. Is there any advantage to upgrading to 4.1? I am experiencing two annoying glitches in ResScan 3.16 where only part of the radio button is in the window but it does appear to function correctly. It's the sort of thing one sees when there is a driver issue. The first one occurs in the opening patient window and the second in the download window. Is this fixed in 4.1? If I upgrade, how do I transfer saved data from 3.16 to 4.1?

Thanks.

I don't think ResMed puts out any sort of "upgrade list" showing what bugs were fixed and new features were included in a new version. There may be something like that for Clinicians, but none available to patients as far as I know.

I'm still waiting to hear what exactly is the advantage of 4.1 over 3.16-SP1... so far no one I know of has been able to tell much difference.

On the installation, someone correct me if I'm wrong, but I think you simply install the version 4.1 over the top of version 3.16, correct? It should retain all your old data, I believe.

I'm still using version 3.16 and haven't bothered to upgrade yet. Anyone know for sure?
SuperSleeper
Apnea Board Administrator
www.ApneaBoard.com


INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.





I've only used the 4.1 so don't know.

Usually, with most other software, a change in the main number (3.x to 4.x) means there was a significant change somewhere. Could be design, layout, reporting, etc. Else, they just go up in the .x numbers. Not all companies follow this, however.
PaulaO2
Apnea Board Moderator
www.ApneaBoard.com


Breathe deeply and count to zen.

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.




I backed up my data and downloaded + installed 4.1 which went through without a hitch. Data download from SD card appears to be similar between the two versions on my gaming computer. The two minor glitches still exist in the new version which means they are probably a result of driver issue with my ATI video card.
(12-06-2012, 05:34 PM)SuperSleeper Wrote: I'm still waiting to hear what exactly is the advantage of 4.1 over 3.16-SP1... so far no one I know of has been able to tell much difference.

On the installation, someone correct me if I'm wrong, but I think you simply install the version 4.1 over the top of version 3.16, correct? It should retain all your old data, I believe.

I'm still using version 3.16 and haven't bothered to upgrade yet. Anyone know for sure?

One advantage is that my resp. therapist uses version 4.1 so I can know ahead of time that the information I have is the same as what she will get. I think she seemed surprised when I said that I have the program. But alas, with a mere "Escape" unit it doesn't tell me all I need to know. But unless you're a professional you might not need the "new" version. Then again, if you like to fake it like I do, why not?


I read both manuals (V3 + V4). Because I could not find any distinctions I keep at V3.
(12-06-2012, 05:34 PM)SuperSleeper Wrote:
(12-06-2012, 10:35 AM)IDRIck Wrote: If I upgrade, how do I transfer saved data from 3.16 to 4.1?

On the installation, someone correct me if I'm wrong, but I think you simply install the version 4.1 over the top of version 3.16, correct? It should retain all your old data, I believe.

Yes, my old data was retained when I upgraded from 3.11 to 3.16, and again when upgrading to 4.1.

By the way, when my RT sold me ResScan 3.11, he advised me that, whenever downloading data from the data card, to always "Discard" redundant data from the data card rather than "Overwrite" data already stored on the computer. This way, there is no chance of losing any of the old data downloaded earlier.
Membership in the Advisory Member group should not be understood as in any way implying medical expertise or qualification for advising Sleep Apnea patients concerning their treatment. The Advisory Member group provides advice and suggestions to Apnea Board administrators and staff on matters concerning Apnea Board operation and administrative policies - not on matters concerning treatment for Sleep Apnea. I think it is now too late to change the name of the group but I think Voting Member group would perhaps have been a more descriptive name for the group.
(12-08-2012, 09:03 AM)Tree-Spirit Wrote: I read both manuals (V3 + V4). Because I could not find any distinctions I keep at V3.

Wow, someone who actually reads manuals. I'm the kind of person who just dives right into software and starts messing with it and rarely use the official manuals. I think your way is better, Tree-Spirit! I need to start doing that, I guess. Grin

(12-08-2012, 10:17 AM)vsheline Wrote: Yes, my old data was retained when I upgraded from 3.11 to 3.16, and again when upgrading to 4.1.

Good info, Vaughn! Thanks for confirming that it retains data upon upgrading... good to know! Coffee
SuperSleeper
Apnea Board Administrator
www.ApneaBoard.com


INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.





Thumbsup 
Hi all, I'm a newbe here.Cool I use the S8 Elite II with EPR for over 2,5 years now and had one breakdown when I was in Oxford GBR for business. Only then you can tell how dependant you are, could not sleep and felt broken the nex morning!!! So I was ultimately happy that the British Resmed settlement near Didcot repaired my machine for free. Hail, hail to them forever!
I just downloaded both 3.16 and 4.1 and first installed 3.16 over my 3.10 version. Did not see any difference, only in the Browser screen, where now the whole screen is used (In version 3.10 the last day was in the centre, the right half was empty). There is also a Device Log, which does not show anything with my CPAP.
Later I installed 4.1 and did not notice any difference!
For you guys with a new PC: I have installed Windows 8 Pro and everything works like a charm on both versions!!!
THANK YOU HEALTHCARE WORKER. Thanks
Happy Holydays to all of you from the Netherlands!
Sleep-well
Breathe freely!


Possibly Related Threads...
Thread Author Replies Views Last Post
  AirView vs ResScan yankees123 2 111 10-12-2017, 01:33 PM
Last Post: yankees123
  [Admin Note] New ResScan version 5.8 SuperSleeper 10 3,226 10-07-2017, 08:52 PM
Last Post: SuperSleeper
  Problem with Sleepyhead current version sirto 8 520 09-29-2017, 10:53 PM
Last Post: Sean Turvey
  ResScan Help-How to print 1yr. Certificate? Zerojunk 1 261 09-06-2017, 08:04 PM
Last Post: Sleeprider
  ResScan? Kaunakakai 48 2,323 09-03-2017, 11:35 AM
Last Post: Crimson Nape
  ResScan v SleepyHead slight difference in data interpretation . dwd1249 0 319 09-01-2017, 11:45 PM
Last Post: dwd1249
  sleepyhead software - how to get info from CPAP to computer? cookie810 31 8,480 08-29-2017, 02:30 AM
Last Post: boutros55

Forum Jump:

New Posts   Today's Posts




About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.

For any more information, please use our contact form.