Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

ResScan CPAP Reporting Software (OLD version: 5.5) [Archived Discussions]
RE: ResScan CPAP Reporting Software (current version: 4.3)
(08-01-2013, 11:31 AM)Jason Hamby Wrote: Hello out there - I am considering downloading this program to read the SD card off a ResMed S9 - if I read the card, will the info still remain on the card for my Doc to see - I don't want to delete or mess up what they need to see.
Hi Jason Hamby and welcome to the forum
Yes. It makes no difference how often you download, the machines stores therapy and compliance data up to 365 days and detailed data written directly on the card (30 days of detailed data and 7 days of flow data), so important not forget to put the SD card back in the machine ... can happen at times . Data on the device and on the card http://www.s9morecomfort.com/s9morecomfo...ement.html

As for doctors, I've not met a doctor who check more than averages (usage, AHI, leak)



Donate to Apnea Board  
RE: ResScan CPAP Reporting Software (current version: 4.3)
(08-01-2013, 09:28 AM)NancyMidland Wrote: I download daily. I download all detailed data and have lots of graphs, but the software does not give the option to check for flow data. I have pressure, leak, minute ventilation, flow limitation, AHI, events and snore index as options. No flow option.
Here's a video by forum member "DreamDiver" you may find useful
http://montfordhouse.com/cpap/resscan_tu...index.html
RE: ResScan CPAP Reporting Software (current version: 4.3)
OK. I don't usually feel stupid about internet things. But I don't know how to check what version of the software I have. When I right click I don't get the screen you show. And I don't see anywhere to check once I open it.
RE: ResScan CPAP Reporting Software (current version: 4.3)
For ResScan version click on Help in the menu bar up top and then click on "About."



Donate to Apnea Board  
RE: ResScan CPAP Reporting Software (current version: 4.3)
Got it. I had not chosen "all" but had chosen "first detailed session". When I switched to all I got the flow data. FinallY!!!!
RE: ResScan CPAP Reporting Software (current version: 4.3)
I am trying to find a way to download the ResScan software without being a health professional. I guess there is a way.
Thanks
RE: ResScan CPAP Reporting Software (current version: 4.3)
You can find it here http://www.apneaboard.com/forums/Thread-...d=99#pid99
Sleepster
Apnea Board Moderator
www.ApneaBoard.com


INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.



Donate to Apnea Board  
RE: ResScan CPAP Reporting Software (current version: 4.3)
I've got a question on installing ResScan 4.1_SP1. In one of the first steps of the installation I'm asked if I want to do a 'Complete' or 'Custom' install. When software gives me that option, I always select 'custom' if only to see what is going to be installed.

In this case selecting 'Custom' tells me it is going to install 'ResScan' and 'Drivers' in folder ".../rescan3/". I understand that the drivers should not be installed, but I find no way to deselect the drivers listed here.

Or are these drivers OK, and the ones that should not be installed called out later?

Is there a step by step or video of this installation somewhere?
RE: ResScan CPAP Reporting Software (current version: 4.3)
(08-03-2013, 11:57 PM)SkyWinder Wrote: In one of the first steps of the installation I'm asked if I want to do a 'Complete' or 'Custom' install.
From the manual
During installation, one of the dialogs asks you to choose a Complete or Custom installation. Choose Custom if you want to change the installation directory from the default location; otherwise, choose Complete.
RE: ResScan CPAP Reporting Software (current version: 4.3)
Sounds like you are saying these drivers are OK. That the drivers that should not be installed are specified later in the install sequence.



Donate to Apnea Board  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Difference in reporting useage in Oscar from Sleephead biyahero 25 344 4 hours ago
Last Post: biyahero
  Can't find a software for my CPAP machine Yugen2935 1 40 10 hours ago
Last Post: Crimson Nape
  ResScan 5.9 Install ThePaper 6 788 07-02-2019, 05:30 PM
Last Post: OpalRose
  Oscar vs Resscan Apnearon 12 359 06-28-2019, 10:37 AM
Last Post: Apnearon
  ResMed/ResScan jinx1953 6 363 06-17-2019, 07:51 AM
Last Post: jinx1953
  ResScan 6.0 30 day compliance lilwes 3 841 06-02-2019, 06:56 PM
Last Post: lilwes
  OSCAR -- Unknown Reporting Error In Overview RWS0022 10 269 06-02-2019, 01:07 PM
Last Post: Apnea Infant


New Posts   Today's Posts






About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.