Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

ResScan CPAP Reporting Software (OLD version: 5.5) [Archived Discussions]
I just installed ResScan 5.1 (downloaded via the apneaboard link). When I try to run it I get the following pop-up error box:

(red X) PURE virtual function called

I click on OK and ResScan closes. Any suggestions (I am running Windows 7 Pro 64 bit)
(12-30-2014, 06:22 PM)tomd617 Wrote: I just installed ResScan 5.1 (downloaded via the apneaboard link). When I try to run it I get the following pop-up error box:

(red X) PURE virtual function called

I click on OK and ResScan closes. Any suggestions (I am running Windows 7 Pro 64 bit)

No idea what the problem is, but I would uninstall it, re download the install file, and reinstall.

(12-30-2014, 06:34 PM)jcarerra Wrote:
(12-30-2014, 06:22 PM)tomd617 Wrote: I just installed ResScan 5.1 (downloaded via the apneaboard link). When I try to run it I get the following pop-up error box:

(red X) PURE virtual function called

I click on OK and ResScan closes. Any suggestions (I am running Windows 7 Pro 64 bit)

No idea what the problem is, but I would uninstall it, re download the install file, and reinstall.

Thanks for the reply. I uninstalled, deleted installation folder, downloaded again, installed, and get the same results. Guess it just doesn't like me. SleepyHead works fine.


well, at least you have the sleepyhead to use.

It bothers me though when things like this happen.
It SHOULD work, but in the world of computers....
(12-30-2014, 06:22 PM)tomd617 Wrote: I just installed ResScan 5.1 (downloaded via the apneaboard link). When I try to run it I get the following pop-up error box:

(red X) PURE virtual function called

I click on OK and ResScan closes. Any suggestions (I am running Windows 7 Pro 64 bit)

Tom, try this:

Right-click the ResScan shortcut, select Properties, and on the "Compatibility" tab, select Windows XP (Service Pack 3) Compatibility mode, then click OK. Then click on the ResScan shortcut again to start up the program.

Coffee
SuperSleeper
Apnea Board Administrator
www.ApneaBoard.com


INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.




Does Resmed support the Apple OS? Just curious if there are any plans to port it over. I have an S10 for women and I get an error in Sleepyhead when I import data. I am bummed because all I get to see is the dummed-down reports from the Resmed site.


(12-31-2014, 12:08 AM)Lbravo Wrote: Does Resmed support the Apple OS? Just curious if there are any plans to port it over.

Hi Lbravo, welcome to Apnea Board!

ResMed runs on only Windows, but we can run ResScan on a Mac if using a Windows virtual machine (such as Parallels).

Take care,
--- Vaughn

Membership in the Advisory Member group should not be understood as in any way implying medical expertise or qualification for advising Sleep Apnea patients concerning their treatment. The Advisory Member group provides advice and suggestions to Apnea Board administrators and staff on matters concerning Apnea Board operation and administrative policies - not on matters concerning treatment for Sleep Apnea. I think it is now too late to change the name of the group but I think Voting Member group would perhaps have been a more descriptive name for the group.
(12-30-2014, 07:54 PM)SuperSleeper Wrote:
(12-30-2014, 06:22 PM)tomd617 Wrote: I just installed ResScan 5.1 (downloaded via the apneaboard link). When I try to run it I get the following pop-up error box:

(red X) PURE virtual function called

I click on OK and ResScan closes. Any suggestions (I am running Windows 7 Pro 64 bit)

Tom, try this:

Right-click the ResScan shortcut, select Properties, and on the "Compatibility" tab, select Windows XP (Service Pack 3) Compatibility mode, then click OK. Then click on the ResScan shortcut again to start up the program.

Coffee

That did the trick. Thanks!!!!
Quote:Tom, try this:

Right-click the ResScan shortcut, select Properties, and on the "Compatibility" tab, select Windows XP (Service Pack 3) Compatibility mode, then click OK. Then click on the ResScan shortcut again to start up the program.

Coffee

Wow. I'm glad I saw this. My Outlook 2007 has been quitting right after starting up the program under Windows 8.1, so I tried this on the Outlook shortcut and presto all is good again! Thanks



Hi all
Just to give you feedback on the download procedure for ResScan 5.1:
It works brilliant - and I got it up running within 15 minutes.

Current version 5.1.0.8731.

Looking forward to be digging deeper into my data.
I've been using SleepHead so far, also with out issues.

Seeing data missing (yes, I've read the topics of this elsewhere in the board), I decided to give ResScan a go.

Happy sleeping out there.

Best regards
Lars


Possibly Related Threads...
Thread Author Replies Views Last Post
  Backing up ResScan data drmick3 33 7,409 Yesterday, 09:58 AM
Last Post: piezanno
  ResScan Reports dtester 2 61 Yesterday, 05:18 AM
Last Post: DeepBreathing
  ResScan? Kaunakakai 51 3,831 12-23-2017, 02:07 PM
Last Post: Walla Walla
Information [Admin Note] New ResScan version 5.9 SuperSleeper 15 1,745 12-14-2017, 03:52 PM
Last Post: laneleonard
  ResScan Data mikeh99 13 625 12-10-2017, 09:39 PM
Last Post: SarcasticDave94
  Sleepyhead vs. ResScan Pre-Installation Questions Ron The Piper 10 733 11-22-2017, 08:42 PM
Last Post: AlanE
  Comparing ResScan to Sleepyhead over a long period calcuttaman 3 343 11-22-2017, 12:28 PM
Last Post: pholynyk

Forum Jump:

New Posts   Today's Posts




About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.

For any more information, please use our contact form.