Thread Closed 
ResScan CPAP Reporting Software (current version: 5.5) [Archived Discussions]
Author Message
zonk Offline

Advisory Members

Posts: 7,908
Joined: Feb 2012

Machine: A10 AutoSet
Mask Type: Nasal mask
Mask Make & Model: Activa LT
Humidifier: Integrated /ClimateLineAir
CPAP Pressure: 9/13
CPAP Software: ResScan

Other Comments: CPAP since Nov 2010

Sex: Male
Location: Australia

Post: #1081
RE: ResScan CPAP Reporting Software (current version: 5.4)
(06-21-2015 09:56 PM)aussieboozer Wrote:  
(06-17-2015 07:39 PM)zonk Wrote:  
(06-17-2015 07:12 PM)aussieboozer Wrote:  5.4 seems to download the data ok for me. The 30 day compliance report however always picks up the first 30 days of data - is there any way to make it use the most recent 30 days?
Statistics ... viewing range ... 1 day
For most recent 30 days ... scroll down to 30 days

I can do this okay from the Review Tab but can't find a way to alter the 30 day compliant period as it is locked to the first 30 days of use and can't be edited. I wanted to produce the standard 30 day compliance report but use the last 30 days data not the first 30 days!
The main purpose of the 30 days compliance report is satisfy US Medicare compliance requirement
Outside US, have no such relevance
06-22-2015 05:30 PM
Find all posts by this user

Donate to Apnea Board
jimmer24 Offline

New Members

Posts: 1
Joined: Jun 2015

Machine: ResMes S9 Elite
Mask Type: Full face mask
Mask Make & Model: Mirage Liberty
Humidifier: ResMed H5I
CPAP Pressure: 13 cm h20
CPAP Software: ResScan

Other Comments:

Sex: Male
Location: Colorado, USA

Post: #1082
RE: ResScan CPAP Reporting Software (current version: 5.4.1)
I downloaded the ResMes software and started installing it and it only goes so far and says a file is missing and it can not continue...ok now what?
06-22-2015 11:24 PM
Find all posts by this user
zonk Offline

Advisory Members

Posts: 7,908
Joined: Feb 2012

Machine: A10 AutoSet
Mask Type: Nasal mask
Mask Make & Model: Activa LT
Humidifier: Integrated /ClimateLineAir
CPAP Pressure: 9/13
CPAP Software: ResScan

Other Comments: CPAP since Nov 2010

Sex: Male
Location: Australia

Post: #1083
RE: ResScan CPAP Reporting Software (current version: 5.4.1)
(06-22-2015 11:24 PM)jimmer24 Wrote:  I downloaded the ResMes software and started installing it and it only goes so far and says a file is missing and it can not continue...ok now what?
Hi jimmer24
Just wanted to say, welcome to the forum and bumping the thread to the top, hoping someone else might have answer for you

Try download ResScan again, and if still not working, you can use SleepyHead
ResScan windows only, SH windows and Mac

btw, whats the model of your S9
[Image: s9-autoset-models.jpg]
06-23-2015 04:18 PM
Find all posts by this user

Donate to Apnea Board
libraryman Offline

New Members

Posts: 1
Joined: Jun 2015

Machine: ResMed AirSense 10 Autoset (USA)
Mask Type: Full face mask
Mask Make & Model: ResMed Airfit F10
Humidifier: Integrated humidifier
CPAP Pressure: 10
CPAP Software: ResScan

Other Comments: Started CPAP therapy on 1 Jun 2015.

Sex: Male
Location: Louisiana, USA

Post: #1084
RE: ResScan CPAP Reporting Software (current version: 5.4.1)
I appreciate the link to ResScan software. I was able to download it and use it on my computer with little to no difficulty. I produced a PDF compliance report and e-mailed it to my doctor yesterday when he asked me for something else. He was pleased and said it "looks great."
For reference, I used ResScan on a Dell Latitude laptop computer running Windows 7 Professional 64-bit. Downloading it through my home wireless internet took a little while, but wasn't cumbersome.
07-01-2015 09:31 PM
Find all posts by this user
Bumble_OH Offline

New Members

Posts: 1
Joined: Jul 2015

Machine: ResMed S9
Mask Type: Nasal mask
Mask Make & Model: Unsure
Humidifier: Unsure
CPAP Pressure: 0-15
CPAP Software: Not using software

Other Comments:

Sex: Male
Location:

Post: #1085
RE: ResScan CPAP Reporting Software (current version: 5.4.1)
FYI...
Received the email with the link for the ResMed 5.4.1 software & downloaded it tonight. When I extracted the zip file, my anti-virus captured and prevented installation due to a virus (reputation)...Off to find software elsewhere I guess....Thanks!
07-05-2015 06:03 PM
Find all posts by this user

Donate to Apnea Board
vsheline Offline

Advisory Members

Posts: 1,908
Joined: Jul 2012

Machine: S9 VPAP Adapt (USA Model# 36007, not better 36037 or 36067)
Mask Type: Full face mask
Mask Make & Model: F10 or SimPlus w/ 2Liners. MirageQuatro & Gecko gel pad
Humidifier: H5i
CPAP Pressure: 15 EPAP, PS 5-10
CPAP Software: ResScan

Other Comments: Marfan Syndrome, chronic bradycardia, occasional Cheyne-Stokes Respiration

Sex: Male
Location: California, USA

Post: #1086
RE: ResScan CPAP Reporting Software (current version: 5.4.1)
(07-05-2015 06:03 PM)Bumble_OH Wrote:  FYI...
Received the email with the link for the ResMed 5.4.1 software & downloaded it tonight. When I extracted the zip file, my anti-virus captured and prevented installation due to a virus (reputation)...Off to find software elsewhere I guess....Thanks!

Hi Bumble_OH, welcome to Apnea Board.

Because the software was directly downloaded from ResMed site, it is unlikely the software is infected with virus. Far more likely that your antivirus software is producing a false positive result.

The shareware program SleepyHead will also work with your machine, and many prefer it over ResScan. Be sure to use the only link on Apnea Board to find and download it, though.

By the way, your profile shows your pressure range is wide open on the low side. After a short while, most APAP (auto-adjusting CPAP) patients find 4 cmH2O pressure becomes uncomfortably low and raise their Min Pressure to 6 or higher. Also, on your machine EPR (which makes breathing under pressure easier) will not work fully except when the pressure is at least EPR higher than 4. For example, if using an EPR settling of 3, the pressure must be at least 7 for EPR to provide a full 3 cmH2O of pressure relief during exhalation, because the machine will never lower the exhalation pressure below 4.

Take care,
--- Vaughn

Membership in the Advisory Member group should not be understood as in any way implying medical expertise or qualification for advising Sleep Apnea patients concerning their treatment. The Advisory Member group provides advice and suggestions to Apnea Board administrators and staff on matters concerning Apnea Board operation and administrative policies - not on matters concerning treatment for Sleep Apnea. I think it is now too late to change the name of the group but I think Voting Member group would perhaps have been a more descriptive name for the group.
(This post was last modified: 07-05-2015 06:40 PM by vsheline.)
07-05-2015 06:17 PM
Find all posts by this user
zonk Offline

Advisory Members

Posts: 7,908
Joined: Feb 2012

Machine: A10 AutoSet
Mask Type: Nasal mask
Mask Make & Model: Activa LT
Humidifier: Integrated /ClimateLineAir
CPAP Pressure: 9/13
CPAP Software: ResScan

Other Comments: CPAP since Nov 2010

Sex: Male
Location: Australia

Post: #1087
RE: ResScan CPAP Reporting Software (current version: 5.4.1)
(07-05-2015 06:03 PM)Bumble_OH Wrote:  FYI...
Received the email with the link for the ResMed 5.4.1 software & downloaded it tonight. When I extracted the zip file, my anti-virus captured and prevented installation due to a virus (reputation)...Off to find software elsewhere I guess....Thanks!
I had the same thing, but run it regardless without problems
The computer might not like as its from unknown publisher but its a direct link from the source, no third parties involved

I would be wary of any outside link
07-05-2015 06:32 PM
Find all posts by this user

Donate to Apnea Board
sleepybeaver Offline

Preferred Members

Posts: 81
Joined: May 2015

Machine: A 10 autoset
Mask Type: Nasal pillows
Mask Make & Model: airfit p10
Humidifier: built-in , with climate line
CPAP Pressure: 6 to 12
CPAP Software: SleepyHead

Other Comments: I'm not really a prist...and my wife is not a nun....Halloween Costumes

Sex: Male
Location: Northeast Ohio

Post: #1088
RE: ResScan CPAP Reporting Software (current version: 5.4.1)
Can you have sleepyhead and ResScan software on same computer....and just pick between them....thanks

It's exactly like that. . . . only totally different. . . . Sleep-well
07-05-2015 08:16 PM
Find all posts by this user
vsheline Offline

Advisory Members

Posts: 1,908
Joined: Jul 2012

Machine: S9 VPAP Adapt (USA Model# 36007, not better 36037 or 36067)
Mask Type: Full face mask
Mask Make & Model: F10 or SimPlus w/ 2Liners. MirageQuatro & Gecko gel pad
Humidifier: H5i
CPAP Pressure: 15 EPAP, PS 5-10
CPAP Software: ResScan

Other Comments: Marfan Syndrome, chronic bradycardia, occasional Cheyne-Stokes Respiration

Sex: Male
Location: California, USA

Post: #1089
RE: ResScan CPAP Reporting Software (current version: 5.4.1)
(07-05-2015 08:16 PM)sleepybeaver Wrote:  Can you have sleepyhead and ResScan software on same computer....and just pick between them....thanks

If you have a ResMed machine, yes. ResScan supports only ResMed machines.

Membership in the Advisory Member group should not be understood as in any way implying medical expertise or qualification for advising Sleep Apnea patients concerning their treatment. The Advisory Member group provides advice and suggestions to Apnea Board administrators and staff on matters concerning Apnea Board operation and administrative policies - not on matters concerning treatment for Sleep Apnea. I think it is now too late to change the name of the group but I think Voting Member group would perhaps have been a more descriptive name for the group.
07-05-2015 08:41 PM
Find all posts by this user

Donate to Apnea Board
sleepybeaver Offline

Preferred Members

Posts: 81
Joined: May 2015

Machine: A 10 autoset
Mask Type: Nasal pillows
Mask Make & Model: airfit p10
Humidifier: built-in , with climate line
CPAP Pressure: 6 to 12
CPAP Software: SleepyHead

Other Comments: I'm not really a prist...and my wife is not a nun....Halloween Costumes

Sex: Male
Location: Northeast Ohio

Post: #1090
RE: ResScan CPAP Reporting Software (current version: 5.4.1)
(06-22-2015 11:24 PM)jimmer24 Wrote:  I downloaded the ResMes software and started installing it and it only goes so far and says a file is missing and it can not continue...ok now what?

Same thing here....I'm ok with Sleeyhead...just wanted to see the difference between them.

It's exactly like that. . . . only totally different. . . . Sleep-well
07-05-2015 08:42 PM
Find all posts by this user
Thread Closed 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  ResScan - not supported jmitchell151 3 158 12-06-2016 07:17 PM
Last Post: jmitchell151
Arrow [Admin Note] ResScan - [version 5.7] SuperSleeper 57 7,193 12-01-2016 12:43 PM
Last Post: SuperSleeper
  ResScan 5.5 cannot run in Windows 10 ant08 6 344 12-01-2016 12:21 PM
Last Post: cbramsey
  new ResMed machine and ResScan software issue fluffyetal 1 198 11-18-2016 06:40 AM
Last Post: Sleeprider
  can resscan read cards from two machines whirschb 8 494 11-14-2016 04:03 PM
Last Post: Mosquitobait
Question ResScan=Unable to detect device communications library cobaltpanther 6 602 11-12-2016 02:19 PM
Last Post: Kitalarium
  ResScan Prometheus 4 361 11-04-2016 07:11 PM
Last Post: SuperSleeper

Forum Jump:

Who's Online (Complete List)