Thread Closed 
ResScan CPAP Reporting Software (current version: 5.5) [Archived Discussions]
Author Message
greatunclebill Offline

Members-b

Posts: 549
Joined: Feb 2012

Machine: Respironics System one Auto A-Flex
Mask Type: Full face mask
Mask Make & Model:
Humidifier: System one
CPAP Pressure: 8-12
CPAP Software: SleepyHead EncoreViewer

Other Comments: quattro fx full face

Sex: Male
Location: L.A. (Lower Alabama)

Post: #101
RE: ResScan CPAP Reporting Software (current version: 3.16-SP1)
(04-29-2012 10:07 AM)VonP Wrote:  Could I ask a small question? I think that I've read somewhere (this forum?) that if you insert the SD-card into your PC's card reader in order to access the data with ResScan, the software will transfer the data to the PC and at the same time will delete it from the SD-card. Is this correct?

Since I just got an Sp Elite on trial from my doctor, I want to see the data here on my PC, but of course, next week the doctor wants to see how we did and so I will need to go to him with the machine and card - the card should still have the data of all week, of course.

Could anybody tell me if the data gets deleted or not, and if it does, if there is a way around it to prevent that?

Thank you in advance Smile

PS Once I get it all working I will donate to this board for the good cause Dancing

i don't know about resscan but i don't think it deletes itself. i'm sure you can do it manually. to be double sure, if your machine wrote to your card, the lock on the side of the card is in the unlocked position. before you put it in the pc card reader move it to the locked position to be sure nothing changes on it. be sure to unlock it before putting it back in the cpap.
04-29-2012 10:19 AM
Find all posts by this user

Donate to Apnea Board
JumpStart Offline

Preferred Members-2

Posts: 297
Joined: Feb 2012

Machine: ResMed S9 Autoset
Mask Type: Full face mask
Mask Make & Model:
Humidifier: ResMed H5i
CPAP Pressure: 10 - 20 (auto range)
CPAP Software: ResScan SleepyHead

Other Comments: ResMed Mirage Quattro

Sex: Male
Location: Houston, Texas

Post: #102
RE: ResScan CPAP Reporting Software (current version: 3.16-SP1)
(04-29-2012 10:07 AM)VonP Wrote:  Could I ask a small question? I think that I've read somewhere (this forum?) that if you insert the SD-card into your PC's card reader in order to access the data with ResScan, the software will transfer the data to the PC and at the same time will delete it from the SD-card. Is this correct?

No, that is not correct. It will NOT delete the data on the SD card. I do the same thing almost every day.

Breathing keeps you alive. And PAP helps keep you breathing!
04-29-2012 10:38 AM
Find all posts by this user
Pat Offline

New Members

Posts: 1
Joined: Apr 2012

Machine: ResMed S8 Autoset II
Mask Type: Nasal mask
Mask Make & Model:
Humidifier: One designed for Machine
CPAP Pressure: 13
CPAP Software: ResScan

Other Comments:

Sex: Female
Location:

Post: #103
RE: ResScan CPAP Reporting Software (current version: 3.16-SP1)
There was a previous post about the SmartCard reader for S8 machines. The reader isn't proprietary, and you can buy one from someone other than ResMed. I bought mine from [commerical link removed per Apnea Board rules] You will have to copy and paste since it wouldn't let me add a clickable link. The picture (which is the housing) is a little different from mine. However, it should read the S8 cards fine.





-----
Moderator Action: Link Removed
To maintain our status as an educational organization, the only commercial links allowed in this forum are to CPAP-related manufacturer websites. This is stated in the Apnea Board Rules with details given in the Commercial Links Policy section.
-----
(This post was last modified: 04-30-2012 12:32 PM by Pat.)
04-30-2012 12:25 PM
Find all posts by this user

Donate to Apnea Board
Slimdoll23 Offline

Members

Posts: 6
Joined: Apr 2012

Machine: Resmed S9, Respironics Remstar Auto A flex
Mask Type: Nasal mask
Mask Make & Model: Resprionics
Humidifier: None
CPAP Pressure: 4 to 12
CPAP Software: ResScan SleepyHead

Other Comments:

Sex: Male
Location: Singapore

Post: #104
RE: ResScan CPAP Reporting Software (current version: 3.16-SP1)
Hi, just loaded the ResMed software ResScan. Very straightforward and loaded my data from the SD card. Readings were ok but is there anything wrong with my AHI reading of 0.2? Seems too good to be true.

As previously mentioned, I adapted to the APAP very well from day one.
05-02-2012 10:17 AM
Find all posts by this user
zonk Offline

Advisory Members

Posts: 7,908
Joined: Feb 2012

Machine: A10 AutoSet
Mask Type: Nasal mask
Mask Make & Model: Activa LT
Humidifier: Integrated /ClimateLineAir
CPAP Pressure: 9/13
CPAP Software: ResScan

Other Comments: CPAP since Nov 2010

Sex: Male
Location: Australia

Post: #105
RE: ResScan CPAP Reporting Software (current version: 3.16-SP1)
(05-02-2012 10:17 AM)Slimdoll23 Wrote:  Hi, just loaded the ResMed software ResScan. Very straightforward and loaded my data from the SD card. Readings were ok but is there anything wrong with my AHI reading of 0.2? Seems too good to be true.

As previously mentioned, I adapted to the APAP very well from day one.
Congrats, numbers excellent as long as leak isn't too high, it could vary one night to the next.
How you feel and getting a good night sleep is important too.
05-02-2012 02:41 PM
Find all posts by this user

Donate to Apnea Board
Slimdoll23 Offline

Members

Posts: 6
Joined: Apr 2012

Machine: Resmed S9, Respironics Remstar Auto A flex
Mask Type: Nasal mask
Mask Make & Model: Resprionics
Humidifier: None
CPAP Pressure: 4 to 12
CPAP Software: ResScan SleepyHead

Other Comments:

Sex: Male
Location: Singapore

Post: #106
RE: ResScan CPAP Reporting Software (current version: 3.16-SP1)
(05-02-2012 02:41 PM)zonk Wrote:  
(05-02-2012 10:17 AM)Slimdoll23 Wrote:  Hi, just loaded the ResMed software ResScan. Very straightforward and loaded my data from the SD card. Readings were ok but is there anything wrong with my AHI reading of 0.2? Seems too good to be true.

As previously mentioned, I adapted to the APAP very well from day one.
Congrats, numbers excellent as long as leak isn't too high, it could vary one night to the next.
How you feel and getting a good night sleep is important too.

Thanks zonk. It's the average reading over a month. I feel fresh every morning and I really enjoy going to sleep every night. What would be an acceptable leakage reading?
05-02-2012 06:52 PM
Find all posts by this user
zonk Offline

Advisory Members

Posts: 7,908
Joined: Feb 2012

Machine: A10 AutoSet
Mask Type: Nasal mask
Mask Make & Model: Activa LT
Humidifier: Integrated /ClimateLineAir
CPAP Pressure: 9/13
CPAP Software: ResScan

Other Comments: CPAP since Nov 2010

Sex: Male
Location: Australia

Post: #107
RE: ResScan CPAP Reporting Software (current version: 3.16-SP1)
(05-02-2012 06:52 PM)Slimdoll23 Wrote:  What would be an acceptable leakage reading?
According to ResMed (as the S9 work out unintentional leak) leak below 24 L/min is acceptable and wont compromise the therapy but really any leak even a small leak if it disturb your sleep is no good have to be fixed .
05-02-2012 07:52 PM
Find all posts by this user

Donate to Apnea Board
bilwakka Offline

Members

Posts: 12
Joined: Apr 2012

Machine: RESMED S9 AUTOSET
Mask Type: Nasal mask
Mask Make & Model:
Humidifier: RESMED H5i
CPAP Pressure: 5-18
CPAP Software: ResScan SleepyHead

Other Comments:

Sex: Male
Location: AUSTRALIA

Post: #108
RE: ResScan CPAP Reporting Software (current version: 3.16)
(03-22-2012 09:16 PM)svwilbur Wrote:  There does not appear to be any other version available from ResMed just the 3.16 one.

(04-19-2012 06:14 PM)bilwakka Wrote:  
(03-22-2012 06:51 PM)svwilbur Wrote:  The drivers to uninstall in my case are:
ACR38....
ResMEd USB Adapter
ResMed Ventalator Installer
Rescan
Windows Driver Package - ACS (A38CCID) SmartCardReader
Windows Driver Package - ACS (ACR122U) SmartCardReader
Windows Driver Package - ACS (ACSSCR) SmartCardReader

I know this as I installed them today and in Uninstall or change a program you can list by install date and they all show up as installed today.

SVWILBUR
I am having the exact same problem as you.
See thread "ResScan 3.16 not working for me".
I have reached the same stage as you in identifying the drivers but am stumped on how to locate and delete them.
Have you reached any solution in resolving the matter?

Cheers

bilwakka
05-03-2012 08:58 PM
Find all posts by this user
Paulferg Offline

New Members

Posts: 1
Joined: May 2012

Machine: Resmed auto set 9
Mask Type: Nasal pillows
Mask Make & Model:
Humidifier: Resimed
CPAP Pressure: Unsure
CPAP Software: SleepyHead

Other Comments:

Sex: Male
Location: Australia

Post: #109
RE: ResScan CPAP Reporting Software (current version: 3.16-SP1)
Hi All

Thanks for this great site Please excuse me if I make a faux pas but this is my first post on any site. For some reason I am unable to download the ReScan software. It just sits at 0% and creates a partial download file of 170K. I have disable firewall and virus checker. Any ideas?

Cheers and Thanks
05-04-2012 06:39 AM
Find all posts by this user

Donate to Apnea Board
SuperSleeper Offline

Administrators

Posts: 9,974
Joined: Feb 2012

Machine: PR System One REMstar Auto (DS560)
Mask Type: Nasal pillows
Mask Make & Model: ResMed Mirage Swift II
Humidifier: none
CPAP Pressure: 12.5 - 18.5 cmH20 (auto range)
CPAP Software: SleepyHead

Other Comments: Have diabetes Type II

Sex: Male
Location: Illinois, USA

Post: #110
RE: ResScan CPAP Reporting Software (current version: 3.16-SP1)
(05-04-2012 06:39 AM)Paulferg Wrote:  Hi All

Thanks for this great site Please excuse me if I make a faux pas but this is my first post on any site. For some reason I am unable to download the ReScan software. It just sits at 0% and creates a partial download file of 170K. I have disable firewall and virus checker. Any ideas?

Cheers and Thanks

Hi Paulferg - welcome to Apnea Board!

Try downloading the file at a later time. Sites sometimes go up and down. Also, it's best to download during non-busy times in your local area. Try to download after 11 pm at night and before 7 am in the morning when there's less local network traffic in your area.

SuperSleeper
Apnea Board Administrator
www.ApneaBoard.com


INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.

05-04-2012 08:15 AM
Find all posts by this user
Thread Closed 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  ResScan - not supported jmitchell151 3 186 12-06-2016 07:17 PM
Last Post: jmitchell151
Arrow [Admin Note] ResScan - [version 5.7] SuperSleeper 57 7,317 12-01-2016 12:43 PM
Last Post: SuperSleeper
  ResScan 5.5 cannot run in Windows 10 ant08 6 370 12-01-2016 12:21 PM
Last Post: cbramsey
  new ResMed machine and ResScan software issue fluffyetal 1 206 11-18-2016 06:40 AM
Last Post: Sleeprider
  can resscan read cards from two machines whirschb 8 499 11-14-2016 04:03 PM
Last Post: Mosquitobait
Question ResScan=Unable to detect device communications library cobaltpanther 6 608 11-12-2016 02:19 PM
Last Post: Kitalarium
  ResScan Prometheus 4 380 11-04-2016 07:11 PM
Last Post: SuperSleeper

Forum Jump:

Who's Online (Complete List)