Thread Closed 
ResScan CPAP Reporting Software (current version: 5.5) [Archived Discussions]
Author Message
JJJ Offline

Advisory Members

Posts: 751
Joined: Apr 2012

Machine: ResMed S9 Autoset
Mask Type: Nasal mask
Mask Make & Model: Most recent: Wisp, Pilairo, Mirage Vista
Humidifier: ResMed S9 Autoset
CPAP Pressure: 17-20
CPAP Software: SleepyHead

Other Comments:

Sex: Male
Location: USA 97217

Post: #261
RE: ResScan CPAP Reporting Software (current version: 4.1)
(12-21-2012 01:31 AM)Sleepster Wrote:  SleepyHead rules! Please consider supporting the author.

I sent him a contribution, but he deserves more.
12-21-2012 02:21 AM
Find all posts by this user

Donate to Apnea Board
SuperSleeper Offline

Administrators

Posts: 9,967
Joined: Feb 2012

Machine: PR System One REMstar Auto (DS560)
Mask Type: Nasal pillows
Mask Make & Model: ResMed Mirage Swift II
Humidifier: none
CPAP Pressure: 12.5 - 18.5 cmH20 (auto range)
CPAP Software: SleepyHead

Other Comments: Have diabetes Type II

Sex: Male
Location: Illinois, USA

Post: #262
RE: ResScan CPAP Reporting Software (current version: 4.2)
ResScan Updated to VERSION 4.2


Healthcareworker is now distributing the link to the new ResScan Version 4.2.

If you'd like the download link to the new 4.2 version, please log into your Apnea Board forum account (registration required), then go here for instructions:

http://www.apneaboard.com/forums/Thread-...nload-Link

Also in that post is a link to the new Clinician Manual for ResScan 4.2.

Coffee

EDIT: And, REMEMBER: DO NOT INSTALL THE 3 drivers at the first part of the installation... if you do, your computer will not be able to use any version of ResScan AT ALL.

SuperSleeper
Apnea Board Administrator
www.ApneaBoard.com


INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.

12-31-2012 02:34 PM
Find all posts by this user
Ugly Offline

Preferred Members

Posts: 568
Joined: Oct 2012

Machine: ResMed S9 AutoSet
Mask Type: Nasal mask
Mask Make & Model: ResMed Mirage Micro
Humidifier: ResMed H5i
CPAP Pressure: 7-14
CPAP Software: ResScan SleepyHead

Other Comments: Hydrocephalus, myopia, depression, chronic ugliness, stupidity, tinnitus, mixed sleep apnea.

Sex: Male
Location: Barrie Ontario Canada

Post: #263
RE: ResScan CPAP Reporting Software (current version: 4.2)
(12-31-2012 02:34 PM)SuperSleeper Wrote:  
ResScan Updated to VERSION 4.2


Healthcareworker is now distributing the link to the new ResScan Version 4.2.


EDIT: And, REMEMBER: DO NOT INSTALL THE 3 drivers at the first part of the installation... if you do, your computer will not be able to use any version of ResScan AT ALL.

HOW?

I don't seem to be given the option of excluding the drivers.
Not even as Administrator. How do I bypass this?
12-31-2012 11:36 PM
Find all posts by this user

Donate to Apnea Board
TheWerkz Offline

Preferred Members-2

Posts: 261
Joined: Oct 2012

Machine: ResMed S9 AutoSet
Mask Type: Full face mask
Mask Make & Model: ResMed Mirage Quattro
Humidifier: H5i & ClimateLine Hose
CPAP Pressure: Auto-CPAP 11 - 20
CPAP Software: ResScan SleepyHead

Other Comments:

Sex: Male
Location: Dallas, TX - USA - Planet Earth

Post: #264
RE: ResScan CPAP Reporting Software (current version: 4.2)
(12-31-2012 11:36 PM)Ugly Wrote:  I don't seem to be given the option of excluding the drivers.
Not even as Administrator. How do I bypass this?

Sean, you're not going far enough in the installation, keep hitting next and you'll come to a dialog with 3 check-boxes, they're un-checked by default, just leave them that way and click next and the installation begins to copy afterwards.
12-31-2012 11:56 PM
Find all posts by this user
Ugly Offline

Preferred Members

Posts: 568
Joined: Oct 2012

Machine: ResMed S9 AutoSet
Mask Type: Nasal mask
Mask Make & Model: ResMed Mirage Micro
Humidifier: ResMed H5i
CPAP Pressure: 7-14
CPAP Software: ResScan SleepyHead

Other Comments: Hydrocephalus, myopia, depression, chronic ugliness, stupidity, tinnitus, mixed sleep apnea.

Sex: Male
Location: Barrie Ontario Canada

Post: #265
RE: ResScan CPAP Reporting Software (current version: 4.2)
(12-31-2012 11:56 PM)TheWerkz Wrote:  
(12-31-2012 11:36 PM)Ugly Wrote:  I don't seem to be given the option of excluding the drivers.
Not even as Administrator. How do I bypass this?

Sean, you're not going far enough in the installation, keep hitting next and you'll come to a dialog with 3 check-boxes, they're un-checked by default, just leave them that way and click next and the installation begins to copy afterwards.

I just know that when I select "custom" it mentions "Drivers"
The options I get are "This feature will be installed on local hard drive"
and "This feature and all subfeatures will be installed on local hard drive"
I acknowledge that if they get installed one option will be to reformat the drive but for now I'll take your word for it.
CRWS Settings remains active in the system tray but I trust setup will take care of that too.
01-01-2013 11:48 AM
Find all posts by this user

Donate to Apnea Board
Ugly Offline

Preferred Members

Posts: 568
Joined: Oct 2012

Machine: ResMed S9 AutoSet
Mask Type: Nasal mask
Mask Make & Model: ResMed Mirage Micro
Humidifier: ResMed H5i
CPAP Pressure: 7-14
CPAP Software: ResScan SleepyHead

Other Comments: Hydrocephalus, myopia, depression, chronic ugliness, stupidity, tinnitus, mixed sleep apnea.

Sex: Male
Location: Barrie Ontario Canada

Post: #266
RE: ResScan CPAP Reporting Software (current version: 4.2)
(12-31-2012 11:56 PM)TheWerkz Wrote:  
(12-31-2012 11:36 PM)Ugly Wrote:  I don't seem to be given the option of excluding the drivers.
Not even as Administrator. How do I bypass this?

Sean, you're not going far enough in the installation, keep hitting next and you'll come to a dialog with 3 check-boxes, they're un-checked by default, just leave them that way and click next and the installation begins to copy afterwards.

Thanks. It worked - of course - but when I came to the install options and it wouldn't let me exclude the drivers, I was concerned. I didn't know it would take me to a driver install page where I had final say.
It's possible that I went through the same thing with version 4.1 but with my memory I can't be too sure. It's up and running. Thanks.
01-01-2013 12:08 PM
Find all posts by this user
PaulaO2 Offline
Wiki Editor
Moderators

Posts: 8,065
Joined: Feb 2012

Machine: S9 Autoset
Mask Type: Full face mask
Mask Make & Model: F&P Simplus
Humidifier: H5i
CPAP Pressure: 14-20
CPAP Software: SleepyHead

Other Comments: Ehlers-Danlos Syndrome, Hypermobility Type; chronic sarcasm

Sex: Undisclosed
Location: western NC, USA

Post: #267
RE: ResScan CPAP Reporting Software (current version: 4.2)
I did the same thing. The option for the drivers is on the next screen.

PaulaO2
Apnea Board Moderator
www.ApneaBoard.com


Breathe deeply and count to zen.

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
01-01-2013 12:12 PM
Find all posts by this user

Donate to Apnea Board
xtsui Offline

New Members

Posts: 1
Joined: Dec 2012

Machine: ResMed S9 AutoSet
Mask Type: Nasal mask
Mask Make & Model: ResMed Mirage FX
Humidifier: none
CPAP Pressure: 11
CPAP Software: Not using software

Other Comments:

Sex: Male
Location:

Post: #268
RE: ResScan CPAP Reporting Software (current version: 4.2)
Dear Administrator

What if I have accidentally installed the 3 drivers but have uninstalled the ResScan later, then re-install ResScan later, how can I make ResScan work again. Is there anyway to fix the problem caused by my initial wrongfully installed the 3 drivers such as cleaning up the registry or something similar? Please advise as my ResScan is functioning normally except unable to generate any report at all right now.

Best Regards
XT
01-13-2013 11:00 PM
Find all posts by this user
SuperSleeper Offline

Administrators

Posts: 9,967
Joined: Feb 2012

Machine: PR System One REMstar Auto (DS560)
Mask Type: Nasal pillows
Mask Make & Model: ResMed Mirage Swift II
Humidifier: none
CPAP Pressure: 12.5 - 18.5 cmH20 (auto range)
CPAP Software: SleepyHead

Other Comments: Have diabetes Type II

Sex: Male
Location: Illinois, USA

Post: #269
RE: ResScan CPAP Reporting Software (current version: 4.2)
(01-13-2013 11:00 PM)xtsui Wrote:  Dear Administrator

What if I have accidentally installed the 3 drivers but have uninstalled the ResScan later, then re-install ResScan later, how can I make ResScan work again. Is there anyway to fix the problem caused by my initial wrongfully installed the 3 drivers such as cleaning up the registry or something similar? Please advise as my ResScan is functioning normally except unable to generate any report at all right now.

Best Regards
XT

Hi XT, welcome to Apnea Board. Smile

I know of no method to clean everything up so that ResScan will work once someone has mistakenly installed the 3 proprietary drivers. That's why we make such a big deal out of not doing that in the initial instructions.

I'm not fluent at all with editing the Windows registry - perhaps someone else can chime in and offer a potential solution. So far, however, in the several instances where this mistake has been made, I'm not aware of anyone who has cleaned up everything enough to make ResScan work again on their PC.

In any case, you might try SleepyHead, which is available for free. See the Private Files and Links Forum for that and other available software.

Good luck. Coffee

SuperSleeper
Apnea Board Administrator
www.ApneaBoard.com


INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.

01-14-2013 12:11 AM
Find all posts by this user

Donate to Apnea Board
PaulaO2 Offline
Wiki Editor
Moderators

Posts: 8,065
Joined: Feb 2012

Machine: S9 Autoset
Mask Type: Full face mask
Mask Make & Model: F&P Simplus
Humidifier: H5i
CPAP Pressure: 14-20
CPAP Software: SleepyHead

Other Comments: Ehlers-Danlos Syndrome, Hypermobility Type; chronic sarcasm

Sex: Undisclosed
Location: western NC, USA

Post: #270
RE: ResScan CPAP Reporting Software (current version: 4.2)
Except to reformat the drive. But that's the extreme.

PaulaO2
Apnea Board Moderator
www.ApneaBoard.com


Breathe deeply and count to zen.

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
01-14-2013 12:33 AM
Find all posts by this user
Thread Closed 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
Arrow [Admin Note] ResScan - [version 5.7] SuperSleeper 57 7,089 12-01-2016 12:43 PM
Last Post: SuperSleeper
  ResScan 5.5 cannot run in Windows 10 ant08 6 332 12-01-2016 12:21 PM
Last Post: cbramsey
  ResScan - not supported jmitchell151 2 132 11-23-2016 11:23 PM
Last Post: SuperSleeper
  new ResMed machine and ResScan software issue fluffyetal 1 191 11-18-2016 06:40 AM
Last Post: Sleeprider
  can resscan read cards from two machines whirschb 8 491 11-14-2016 04:03 PM
Last Post: Mosquitobait
Question ResScan=Unable to detect device communications library cobaltpanther 6 594 11-12-2016 02:19 PM
Last Post: Kitalarium
  ResScan Prometheus 4 359 11-04-2016 07:11 PM
Last Post: SuperSleeper

Forum Jump:

Who's Online (Complete List)