Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

ResScan CPAP Reporting Software (current version: 5.5) [Archived Discussions]
(04-13-2013, 06:46 AM)cosmo21APNOE Wrote: Hi there, greetings from germany, the link which is pointing to list for ResScan compatability is broken/doesn't work.

It seems, that Softwarare 4.2 in german is not finished yet.
It works, but there are some buttons in special windows, which are not fully seeable. Sometimes the user is not able to push it, because those buttons don't fit in the program-windows.
Please excuse my english. Hope everyone is able to understand, what I've tried to explain.
;-)
Not sure about the German version
Have you tried SleepyHead, some have better luck with sleepyHead
which S9 auto do you use, AutoSet or Escape Auto
Look next to power button for the model name

Hi, I am trying to download the ResScan software from the links in the email I received via the process on this thread but every time I try to download either the 3.16 or 4.2 version the download fails after a few MB's.

Does anyone have an alternative source or workaround they could share?
(04-15-2013, 01:13 PM)iPhone Wrote: Hi, I am trying to download the ResScan software from the links in the email I received via the process on this thread but every time I try to download either the 3.16 or 4.2 version the download fails after a few MB's.

Does anyone have an alternative source or workaround they could share?
ResScan for ResMed machines and don,t work with any other machines
The software for Sandman cost too much, you better off getting a used machine
Something like ResMed S9 AutoSet or PR System One Auto (550 or 560) from Supplier #2: http://www.apneaboard.com/forums/Thread-...plier-List
[Supplies #2 and #10 do international shipping]
Both machines uses an SD card and not require any special card reader
ResSan support S9 and SleepyHead supports both machines
Both software are available for free from this board






(04-15-2013, 01:13 PM)iPhone Wrote: Hi, I am trying to download the ResScan software from the links in the email I received via the process on this thread but every time I try to download either the 3.16 or 4.2 version the download fails after a few MB's.

Does anyone have an alternative source or workaround they could share?

Many folks have had issues trying to download ResScan during busy times on your local ISP network. What usually works is to wait until late a night (after 11 pm locally) or early in the morning (before 8 am). Downloading at busy times causes corrupt file downloads.

And Zonk is correct: neither ResScan nor SleepyHead will work with an Sandman Info, if that is the machine you're using.

SuperSleeper
Apnea Board Administrator
www.ApneaBoard.com


INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.



Grin 
I just downloaded the version 4.2 and no where does it say beta. This program works well with the card. Thanks for the help.

ThanksThanksSleep-wellSleep-well
I loaded ResScan 4.2 and did NOT load the 3 drivers.
I choose New patient, put in my info, but show no data.

I do not have my SD card, but put the files in a folder called c:\resmed

Do I have to have my SD card installed?
I dont see anywhere to tell the system where to find the files,
and if i click download, it just says 'connect flow card generator'.

ideas?


(04-25-2013, 08:33 AM)cejay Wrote: I do not have my SD card, but put the files in a folder called c:\resmed

Do I have to have my SD card installed?

Unless you have a wired connection from the APAP to your computer, the only other way you're going to get data transferred from the APAP to your computer is via the SD card. You'll need as SD card reader attached to your computer as well (around $20 or so).

You say you "put the files in a folder..." Are you talking about the ResScan installation files, or the data files from your APAP?

Huh
SuperSleeper
Apnea Board Administrator
www.ApneaBoard.com


INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.



There do not appear to be any significant differences between versions 4.1 and 4.2 for a single user according to http (colon slash slash) www (dot) resmed (dot) com (slash) us (slash) assets (slash) documents (slash) product (slash) resscan (slash) release_notes (slash) 104623_resscan-4-2_release-notes (dot) pdf.
(04-27-2013, 08:17 PM)Snorrri Wrote: There do not appear to be any significant differences between versions 4.1 and 4.2 for a single user according to http (colon slash slash) www (dot) resmed (dot) com (slash) us (slash) assets (slash) documents (slash) product (slash) resscan (slash) release_notes (slash) 104623_resscan-4-2_release-notes (dot) pdf.

For what it is worth, I downloaded and installed 4.2 and did install all drivers....
I don't know why but it is working flawlessly
I thought I had really messed up but the luck was on my side

I think I will go out and get a lottery ticket now Smile


When I try to download the data from the card, I get the message "Connect a flow generator or data card and try again"
The card is correctly.
Any help would be appreciated!


Possibly Related Threads...
Thread Author Replies Views Last Post
Arrow [Admin Note] ResScan - [version 5.7] SuperSleeper 70 11,250 02-11-2017, 03:11 PM
Last Post: MortR
  ResMed s9 SD card unrecognized by ResScan or S'Head krebb21 3 174 02-01-2017, 04:10 AM
Last Post: TBMx
  resscan software download sdouros 7 428 01-30-2017, 08:14 PM
Last Post: Beej
Question How do I erase older data in resScan? justMongo 4 212 01-17-2017, 01:29 PM
Last Post: AlanE
  Can ResScan export DATA to Excel (or csv) file JimN262 2 331 01-03-2017, 11:13 AM
Last Post: JimN262
  sleepyhead software - how to get info from CPAP to computer? cookie810 30 6,246 12-27-2016, 05:24 AM
Last Post: aubrecht
Question Resscan 5.5 reported averages different than machine Fran 0 190 12-18-2016, 12:33 PM
Last Post: Fran

Forum Jump:

New Posts   Today's Posts




About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.

For any more information, please use our contact form.