Thread Closed 
ResScan CPAP Reporting Software (current version: 5.5) [Archived Discussions]
Author Message
me50 Offline

Advisory Members

Posts: 2,559
Joined: Aug 2013

Machine: resmed S9 VPAP Auto
Mask Type: Nasal mask
Mask Make & Model: Wisp and Silicone Head gear
Humidifier: resmed H5i
CPAP Pressure: 18/8
CPAP Software: SleepyHead

Other Comments:

Sex: Undisclosed
Location: USA

Post: #531
RE: ResScan CPAP Reporting Software (current version: 4.3)
(12-21-2013 10:52 AM)CAi Wrote:  
(12-21-2013 10:32 AM)me50 Wrote:  
(12-21-2013 10:16 AM)CAi Wrote:  Hi,
First ever night behind with CPAP,
Where could I get freeware soft fo my ResMed S9.
Thanks!

sleepyhead software is easy to download, work with and fairly easy to understand.

Thanks me50! It works.

Just have to learn a lot Thinking-about

At first, I would watch your AHI's and leaks and then you can start watching the other data later on. Hope this helps. SleepyHead has a nice little statistical summary that gives you a run down of the night's sleep.
(This post was last modified: 12-21-2013 10:59 AM by me50.)
12-21-2013 10:59 AM
Find all posts by this user

Donate to Apnea Board
69developer Offline

Members

Posts: 9
Joined: Dec 2013

Machine: S9
Mask Type: Nasal mask
Mask Make & Model: unsure
Humidifier: unsure
CPAP Pressure: unsure
CPAP Software: Not using software

Other Comments:

Sex: Male
Location:

Post: #532
RE: ResScan CPAP Reporting Software (current version: 4.3)
Hello all, glad I found this forum and have started reading a lot of posts.

I have the ResMed S9 and used the ResScan software and it worked ok. But when i put the SD card back into my S9 machine, it could not read the SD card, said to Erase all data. Dont know what caused this, but only way to get it work with this same SD card was to erase the data.

So any thoughts on what to do the next time? Also, all i did was insert SD card into computer and copied everything. then properly ejected it.
12-21-2013 11:45 PM
Find all posts by this user
me50 Offline

Advisory Members

Posts: 2,559
Joined: Aug 2013

Machine: resmed S9 VPAP Auto
Mask Type: Nasal mask
Mask Make & Model: Wisp and Silicone Head gear
Humidifier: resmed H5i
CPAP Pressure: 18/8
CPAP Software: SleepyHead

Other Comments:

Sex: Undisclosed
Location: USA

Post: #533
RE: ResScan CPAP Reporting Software (current version: 4.3)
There have been a few others that had this happen too. Lock your SD card after taking it out of your cpap machine and then download your data. Before you put your SD card back in your machine, unlock it and put it in your machine. It will say reading card.
(This post was last modified: 12-22-2013 12:07 AM by me50.)
12-22-2013 12:06 AM
Find all posts by this user

Donate to Apnea Board
zonk Offline

Advisory Members

Posts: 7,908
Joined: Feb 2012

Machine: A10 AutoSet
Mask Type: Nasal mask
Mask Make & Model: Activa LT
Humidifier: Integrated /ClimateLineAir
CPAP Pressure: 9/13
CPAP Software: ResScan

Other Comments: CPAP since Nov 2010

Sex: Male
Location: Australia

Post: #534
RE: ResScan CPAP Reporting Software (current version: 4.3)
(12-21-2013 11:45 PM)69developer Wrote:  So any thoughts on what to do the next time?
Welcome aboard
You can try lock the card before insert in the card reader, in this way nothing can corrupt the card, might be worth run computer virus check. If you forget to unlock the card, the S9 will remind you to unlock it
(This post was last modified: 12-22-2013 12:11 AM by zonk.)
12-22-2013 12:10 AM
Find all posts by this user
69developer Offline

Members

Posts: 9
Joined: Dec 2013

Machine: S9
Mask Type: Nasal mask
Mask Make & Model: unsure
Humidifier: unsure
CPAP Pressure: unsure
CPAP Software: Not using software

Other Comments:

Sex: Male
Location:

Post: #535
RE: ResScan CPAP Reporting Software (current version: 4.3)
I locked the card like you said and copied the data over to my computer, then properly ejected the card. I can see the data with sleepyhead just fine.

But i get the same issue putting the SD card back into the S9. First thing it says is to 'Erase card?'.

So any other suggestions?
12-22-2013 07:08 AM
Find all posts by this user

Donate to Apnea Board
CAi Offline

New Members

Posts: 3
Joined: Dec 2013

Machine: ResMed S9 Auto set EPR
Mask Type: Nasal mask
Mask Make & Model: ResMed
Humidifier: ResMed H5i
CPAP Pressure: 4-16
CPAP Software: SleepyHead

Other Comments:

Sex: Male
Location: Finland

Post: #536
RE: ResScan CPAP Reporting Software (current version: 4.3)
(12-21-2013 10:59 AM)me50 Wrote:  
(12-21-2013 10:52 AM)CAi Wrote:  
(12-21-2013 10:32 AM)me50 Wrote:  sleepyhead software is easy to download, work with and fairly easy to understand.

Thanks me50! It works.

Just have to learn a lot Thinking-about

At first, I would watch your AHI's and leaks and then you can start watching the other data later on. Hope this helps. SleepyHead has a nice little statistical summary that gives you a run down of the night's sleep.

Thanks!

Leaks were 0 and AHI 3,2.

This morning I reliazed that SD card was still in my computer Oh-jeez

Well, info was showing AHI 1 Huh Should be good? or ResMed dont record anything if card is missing...
12-22-2013 10:08 AM
Find all posts by this user
me50 Offline

Advisory Members

Posts: 2,559
Joined: Aug 2013

Machine: resmed S9 VPAP Auto
Mask Type: Nasal mask
Mask Make & Model: Wisp and Silicone Head gear
Humidifier: resmed H5i
CPAP Pressure: 18/8
CPAP Software: SleepyHead

Other Comments:

Sex: Undisclosed
Location: USA

Post: #537
RE: ResScan CPAP Reporting Software (current version: 4.3)
ResMed can't record on the SD card if it isn't in your machine. You can see some limited data on your LCD but you won't ever have the data on your SD card from the night(s) you left the SD card in your computer.
12-22-2013 10:37 AM
Find all posts by this user

Donate to Apnea Board
jgjones1972 Offline

Preferred Members-2

Posts: 516
Joined: Nov 2012

Machine: ResMed S9 AutoSet
Mask Type: Full face mask
Mask Make & Model: ResMed Quattro FX
Humidifier: ResMed H5i
CPAP Pressure: 18 - 20
CPAP Software: ResScan SleepyHead

Other Comments: CMS50I PulseOx

Sex: Male
Location: Ohio - USA

Post: #538
RE: ResScan CPAP Reporting Software (current version: 4.3)
When you put the card back into the machine it will write most of the data to the card (compliance, summary and most detailed data including leak and AHI). The only thing that will be missing is the flow data (waveform flow graph) for the night you left the card out. This is because the internal memory on the S9 doesn't store the flow data, it writes it directly to SD. Most of the important stuff that you want to look at will be written to the card when you pop it back in.

Sleep-well
12-22-2013 12:43 PM
Find all posts by this user
me50 Offline

Advisory Members

Posts: 2,559
Joined: Aug 2013

Machine: resmed S9 VPAP Auto
Mask Type: Nasal mask
Mask Make & Model: Wisp and Silicone Head gear
Humidifier: resmed H5i
CPAP Pressure: 18/8
CPAP Software: SleepyHead

Other Comments:

Sex: Undisclosed
Location: USA

Post: #539
RE: ResScan CPAP Reporting Software (current version: 4.3)
(12-22-2013 12:43 PM)jgjones1972 Wrote:  When you put the card back into the machine it will write most of the data to the card (compliance, summary and most detailed data including leak and AHI). The only thing that will be missing is the flow data (waveform flow graph) for the night you left the card out. This is because the internal memory on the S9 doesn't store the flow data, it writes it directly to SD. Most of the important stuff that you want to look at will be written to the card when you pop it back in.

Sleep-well

I didn't know that. I left mine out one night and the data was never there for that one night. It must have been an issue with my machine then.
12-22-2013 01:03 PM
Find all posts by this user

Donate to Apnea Board
zonk Offline

Advisory Members

Posts: 7,908
Joined: Feb 2012

Machine: A10 AutoSet
Mask Type: Nasal mask
Mask Make & Model: Activa LT
Humidifier: Integrated /ClimateLineAir
CPAP Pressure: 9/13
CPAP Software: ResScan

Other Comments: CPAP since Nov 2010

Sex: Male
Location: Australia

Post: #540
RE: ResScan CPAP Reporting Software (current version: 4.3)
(12-22-2013 07:08 AM)69developer Wrote:  But i get the same issue putting the SD card back into the S9. First thing it says is to 'Erase card?'.

So any other suggestions?
Computer virus scan
Unplug from wall outlet, wait a while and plug back, rebooting may helps

After the S9 erase the card, take the card out and put back in the machine
Does the same message display on the screen or say "Reading SD card"?
12-22-2013 02:28 PM
Find all posts by this user
Thread Closed 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
Arrow [Admin Note] ResScan - [version 5.7] SuperSleeper 62 7,461 Yesterday 05:10 PM
Last Post: E.W.
  ResScan - not supported jmitchell151 3 193 12-06-2016 07:17 PM
Last Post: jmitchell151
  ResScan 5.5 cannot run in Windows 10 ant08 6 372 12-01-2016 12:21 PM
Last Post: cbramsey
  new ResMed machine and ResScan software issue fluffyetal 1 211 11-18-2016 06:40 AM
Last Post: Sleeprider
  can resscan read cards from two machines whirschb 8 500 11-14-2016 04:03 PM
Last Post: Mosquitobait
Question ResScan=Unable to detect device communications library cobaltpanther 6 612 11-12-2016 02:19 PM
Last Post: Kitalarium
  ResScan Prometheus 4 386 11-04-2016 07:11 PM
Last Post: SuperSleeper

Forum Jump:

Who's Online (Complete List)