Thread Closed 
ResScan CPAP Reporting Software (current version: 5.5) [Archived Discussions]
Author Message
jcarerra Offline

Advisory Members

Posts: 284
Joined: Jun 2014

Machine: ResMed S9 Adapt SV
Mask Type: Full face mask
Mask Make & Model: Quattro
Humidifier: H5i
CPAP Pressure: min/max EPAP 9/15 min/max PS 4
CPAP Software: ResScan

Other Comments:

Sex: Male
Location: Florida

Post: #731
RE: ResScan CPAP Reporting Software (current version: 5.1)
nitetrain, it is very important to ALWAYS move the lock switch on the microSD card to lock position before putting it into a Windows 8 computer! If you do not, Windows 8 writes hidden data onto the card and it gets rewritten by the data stored in the S9 when you reinsert it--which erases the data that is written directly to the card.
There is a thread on the forum here about that; you can do a search for "System Volume Information."

Also, after you start using the ResScan software, at the download step, there is a dialog where you can select to 'discard' duplicate data or 'overwrite' (data in the computer). Always select DISCARD. The reason is that after 7 days, some detailed data older than 7 days is no longer on the card, so if you select overwrite, the zero-ed out data on the card overwrites the actual real data for those dates inside the ResScan database.
10-09-2014 07:59 AM
Find all posts by this user

Donate to Apnea Board
Reuven Gruber Offline

Preferred Members

Posts: 31
Joined: Sep 2014

Machine: ResMed AirSenseâ„¢ 10 AutoSet
Mask Type: Full face mask
Mask Make & Model: ResMed AirFitâ„¢ F10 Full Face Mask
Humidifier: Integral with AirSense
CPAP Pressure: Autoset 4 to 10.2
CPAP Software: ResScan

Other Comments:

Sex: Male
Location: Jerusalem, Israel

Post: #732
RE: ResScan CPAP Reporting Software (current version: 5.1)
ResScan 5.1 - Detailed Graphs - Events

What are the tiny squares on the zero line of the graph
10-10-2014 01:27 AM
Find all posts by this user
zonk Offline

Advisory Members

Posts: 7,908
Joined: Feb 2012

Machine: A10 AutoSet
Mask Type: Nasal mask
Mask Make & Model: Activa LT
Humidifier: Integrated /ClimateLineAir
CPAP Pressure: 9/13
CPAP Software: ResScan

Other Comments: CPAP since Nov 2010

Sex: Male
Location: Australia

Post: #733
RE: ResScan CPAP Reporting Software (current version: 5.1)
(10-10-2014 01:27 AM)Reuven Gruber Wrote:  ResScan 5.1 - Detailed Graphs - Events

What are the tiny squares on the zero line of the graph
Hypopnea
10-10-2014 01:48 AM
Find all posts by this user

Donate to Apnea Board
Olyhouse Offline

Members

Posts: 4
Joined: Oct 2014

Machine: ResMed S9 Autoset
Mask Type: Full face mask
Mask Make & Model: F&P Simplus
Humidifier: ResMed H51
CPAP Pressure: 10 - 14
CPAP Software: ResScan

Other Comments:

Sex: Male
Location:

Post: #734
RE: ResScan CPAP Reporting Software (current version: 5.1)
Hi All,

I'm new to this forum, and just wanted to thank the person responsible for posting the ResScan software info....so, Thank You! Smile

I'm fairly new to cpap / biflex usage - about 6 months now. My original Respironics machine's humidifier kept acting up, so my supplier brought me the ResMed S9 that I'm using now. I like it a whole lot better! It's quieter, has "auto off", and the humidifier actually works - every time. Plus, now that I have the software I can take a much more proactive part in my therapy.

I'm having problems getting my MANY masks to seal good. It seems that the area just below my eyes is shallower than any mask I've tried so far (about six total now), and my mask will "burp" on my exhale. I have to strap the mask on so tight that it leaves a red ring around my nose and mouth. The F&P mask I have fits well, otherwise, but it does not have the blue comfort gel. I've just resigned myself to put up with the red ring in order to sleep well.

Thanks again for the software and well thought out instructions. I had no problems with the installation, upload, or interpretations.Thanks
10-12-2014 02:30 PM
Find all posts by this user
Evpraxia Offline

Advisory Members

Posts: 313
Joined: Aug 2014

Machine: ResMed S9 AutoSet
Mask Type: Nasal pillows
Mask Make & Model: ResMed Swift LT for Her - Nasal Pillows System
Humidifier: ResMed H5i
CPAP Pressure: 7-17
CPAP Software: ResScan SleepyHead

Other Comments: Cat Staff, bibliophile, love Classical & Byzantine music

Sex: Female
Location: Pacific Northwest USA

Post: #735
RE: ResScan CPAP Reporting Software (current version: 5.1)
(10-12-2014 02:30 PM)Olyhouse Wrote:  Hi All,

I'm new to this forum, and just wanted to thank the person responsible for posting the ResScan software info....so, Thank You! Smile

I'm fairly new to cpap / biflex usage - about 6 months now. My original Respironics machine's humidifier kept acting up, so my supplier brought me the ResMed S9 that I'm using now. I like it a whole lot better! It's quieter, has "auto off", and the humidifier actually works - every time. Plus, now that I have the software I can take a much more proactive part in my therapy.

I'm having problems getting my MANY masks to seal good. It seems that the area just below my eyes is shallower than any mask I've tried so far (about six total now), and my mask will "burp" on my exhale. I have to strap the mask on so tight that it leaves a red ring around my nose and mouth. The F&P mask I have fits well, otherwise, but it does not have the blue comfort gel. I've just resigned myself to put up with the red ring in order to sleep well.

Thanks again for the software and well thought out instructions. I had no problems with the installation, upload, or interpretations.Thanks

Greetings,

I also have the ResMed S9 AutoSet and am VERY glad I have it!

There are some threads on this board that talk about using a fabric "gasket" between your face and the mask that helps it seal well. Having a mask on so tightly that it hurts or leaves this type of red ring is not a good thing. Since I use nasal pillows I am not the best resource for the Full Face Mack (FFM) but there are others who are.

Search the forum board, the board's Wiki for the full face mask issues or start a new thread.

Evpraxia in the Pacific Northwest USA
Diagnosed: 44 AHI when supine, O2 down to 82%
Treated since 20 Sept 2014:: 0.7 AHI, Settings 7-15, EPR on Full Time at Level 3
Better living through CPAP/APAP machines!
10-12-2014 03:37 PM
Find all posts by this user

Donate to Apnea Board
zonk Offline

Advisory Members

Posts: 7,908
Joined: Feb 2012

Machine: A10 AutoSet
Mask Type: Nasal mask
Mask Make & Model: Activa LT
Humidifier: Integrated /ClimateLineAir
CPAP Pressure: 9/13
CPAP Software: ResScan

Other Comments: CPAP since Nov 2010

Sex: Male
Location: Australia

Post: #736
RE: ResScan CPAP Reporting Software (current version: 5.1)
Welcome the forum, Olyhouse
You,re better off posting about mask problems or any other problem not related to ResScan in a separate thread so can be answered by more people. I have not been lucky with full face masks, tried many, Quattro Air seem to works the best for me but only for 1 or 2 hours but have to modify my pressure setting to cope with leaks. I only use full face mask when have cold or my nose feel stuffy and cannot use my nasal mask

Have you tried mask liner?
10-12-2014 03:49 PM
Find all posts by this user
Olyhouse Offline

Members

Posts: 4
Joined: Oct 2014

Machine: ResMed S9 Autoset
Mask Type: Full face mask
Mask Make & Model: F&P Simplus
Humidifier: ResMed H51
CPAP Pressure: 10 - 14
CPAP Software: ResScan

Other Comments:

Sex: Male
Location:

Post: #737
RE: ResScan CPAP Reporting Software (current version: 5.1)
(10-12-2014 03:37 PM)Evpraxia Wrote:  
(10-12-2014 02:30 PM)Olyhouse Wrote:  Thanks! I was noticing your new AHI levels. That's amazing! Mine land between 3 & 5 now, which is a whole lot better than my original study levels of 54 per hour! Lol! I'll check into nasal pillows, as well as the fabric. I'm even more determined now that I've seen your AHI. Smile

Hi All,

I'm new to this forum, and just wanted to thank the person responsible for posting the ResScan software info....so, Thank You! Smile

I'm fairly new to cpap / biflex usage - about 6 months now. My original Respironics machine's humidifier kept acting up, so my supplier brought me the ResMed S9 that I'm using now. I like it a whole lot better! It's quieter, has "auto off", and the humidifier actually works - every time. Plus, now that I have the software I can take a much more proactive part in my therapy.

I'm having problems getting my MANY masks to seal good. It seems that the area just below my eyes is shallower than any mask I've tried so far (about six total now), and my mask will "burp" on my exhale. I have to strap the mask on so tight that it leaves a red ring around my nose and mouth. The F&P mask I have fits well, otherwise, but it does not have the blue comfort gel. I've just resigned myself to put up with the red ring in order to sleep well.

Thanks again for the software and well thought out instructions. I had no problems with the installation, upload, or interpretations.Thanks

Greetings,

I also have the ResMed S9 AutoSet and am VERY glad I have it!

There are some threads on this board that talk about using a fabric "gasket" between your face and the mask that helps it seal well. Having a mask on so tightly that it hurts or leaves this type of red ring is not a good thing. Since I use nasal pillows I am not the best resource for the Full Face Mack (FFM) but there are others who are.

Search the forum board, the board's Wiki for the full face mask issues or start a new thread.
10-12-2014 05:46 PM
Find all posts by this user

Donate to Apnea Board
Swysey Offline

Members

Posts: 4
Joined: Oct 2014

Machine: Resmed Air Sense 10 Autoset
Mask Type: Nasal pillows
Mask Make & Model: Resmed Swift FX
Humidifier: Airsense 10 Autoset
CPAP Pressure: 4-20
CPAP Software: Not using software

Other Comments:

Sex: Male
Location:

Post: #738
Wink [split] Posting Messages
Hi All

Can someone please assist me settings on the Airsense 10 Autoset.

I would like to monitor my api readings, etcc and this facility has to be set by a techinician.

I find this grossly unfair to have to pay extra now for this feature.

I have recently purchased my machine from the US.

Many Thanks

Swysey - Australia Smile
10-13-2014 12:57 AM
Find all posts by this user
zonk Offline

Advisory Members

Posts: 7,908
Joined: Feb 2012

Machine: A10 AutoSet
Mask Type: Nasal mask
Mask Make & Model: Activa LT
Humidifier: Integrated /ClimateLineAir
CPAP Pressure: 9/13
CPAP Software: ResScan

Other Comments: CPAP since Nov 2010

Sex: Male
Location: Australia

Post: #739
RE: Air Sense 10 Autoset - HELP!!
(10-13-2014 12:57 AM)Swysey Wrote:  Hi All

Can someone please assist me settings on the Airsense 10 Autoset.

I would like to monitor my api readings, etcc and this facility has to be set by a techinician.

I find this grossly unfair to have to pay extra now for this feature.

I have recently purchased my machine from the US.

Many Thanks

Swysey - Australia Smile
Welcome to the forum, Swysey
All explained in the clinical manual, available via email. Make sure "Essentials" set to "Plus" in the clinical menu
http://www.apneaboard.com/adjust-cpap-pr...tup-manual

Software links http://www.apneaboard.com/forums/Forum-Private-Files-and-Links
ResScan supports AirSense 10 but window only
Latest SleepyHead release support A10 and works with windows and Mac

You came here, you need to post your questions in the main forum
Congrats on doing your homework prior purchasing your machine
Best of luck
10-13-2014 04:09 AM
Find all posts by this user

Donate to Apnea Board
Swysey Offline

Members

Posts: 4
Joined: Oct 2014

Machine: Resmed Air Sense 10 Autoset
Mask Type: Nasal pillows
Mask Make & Model: Resmed Swift FX
Humidifier: Airsense 10 Autoset
CPAP Pressure: 4-20
CPAP Software: Not using software

Other Comments:

Sex: Male
Location:

Post: #740
RE: ResScan CPAP Reporting Software (current version: 5.1)
HI

I have just installed the ResScan software.

In the link provided I am to expect the file Res4, however the Clinicians manual is under file name Res3.

My concern is that I want to change the settings on my A10 to reflect events per hour etc...

Please help me.

Much appreciated!!!Wink
10-13-2014 05:24 AM
Find all posts by this user
Thread Closed 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  ResScan - not supported jmitchell151 3 156 Yesterday 07:17 PM
Last Post: jmitchell151
Arrow [Admin Note] ResScan - [version 5.7] SuperSleeper 57 7,165 12-01-2016 12:43 PM
Last Post: SuperSleeper
  ResScan 5.5 cannot run in Windows 10 ant08 6 337 12-01-2016 12:21 PM
Last Post: cbramsey
  new ResMed machine and ResScan software issue fluffyetal 1 195 11-18-2016 06:40 AM
Last Post: Sleeprider
  can resscan read cards from two machines whirschb 8 494 11-14-2016 04:03 PM
Last Post: Mosquitobait
Question ResScan=Unable to detect device communications library cobaltpanther 6 601 11-12-2016 02:19 PM
Last Post: Kitalarium
  ResScan Prometheus 4 360 11-04-2016 07:11 PM
Last Post: SuperSleeper

Forum Jump:

Who's Online (Complete List)