Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

Resmed 11
#1
Resmed 11
Is the new resmed 11 supported? I have to submit reports for the DOT. I have been using this software for several years without issue. 

Works like a charm on the 10 model. Just checking to make sure I’ll have no issues printing off the usage reports. 

Thanks, Frank
Post Reply Post Reply
#2
RE: Resmed 11
As long as you have the time zone set to your local standard time, you shouldn't have any problems. All the graphs and calculations are correct.
Apnea Board Monitors are members who help oversee the smooth functioning of the Board. They are also members of the Advisory Committee which helps shape Apnea Board's rules & policies. Membership in the Advisory Members group does not imply medical expertise or qualification for advising Sleep Apnea patients concerning their treatment.
Post Reply Post Reply
#3
RE: Resmed 11
Yes, OSCAR supports the Resmed 11 data files. Now the bad news. . . Resmed in all their wisdom decided to change some file extensions. This can cause problem for OSCAR is you try to use the same SD card in an AS10 and also an AS11. So it will require to reformat the card when jumping between machines.
Crimson Nape
Apnea Board Moderator
www.ApneaBoard.com
___________________________________
Useful Links -or- When All Else Fails:
The Guide to Understanding OSCAR
OSCAR Chart Organization
Attaching Images and Files on Apnea Board
Apnea Helpful Tips

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#4
RE: Resmed 11
It's always best necessary to use separate cards for each machine. I think you have been doing that.
Apnea Board Monitors are members who help oversee the smooth functioning of the Board. They are also members of the Advisory Committee which helps shape Apnea Board's rules & policies. Membership in the Advisory Members group does not imply medical expertise or qualification for advising Sleep Apnea patients concerning their treatment.
Post Reply Post Reply
#5
RE: Resmed 11
I did have two tens with separate cards and separate names on Oscar. Well yesterday someone decided to steal my truck 10 when I wasn’t paying attention in a hotel lobby!! 

So I had to order a new one and it will be a 11 and have a separate card and name
Post Reply Post Reply
#6
RE: Resmed 11
I was beginning to be worried that I wasn't going to be able to continue to use my FlashAir cards.
Even after using the machine to erase all data, OSCAR still did not find valid data for last night... my first night with the new A-11.
I created a new profile, same issue.
I compared the folder on the card with the FlashPap data folder, and one of the changes from the A10 to A11 is the file "Identification.tgt" was changed to "Identification.json", and Flashpap did not copy it.
Once I copied that file, I was able to import the data files without a problem, and the same OSCAR profile seamlessly shows my old A10 data as well as the new data.

Hopefully, this identification file is not updated regularly, or if it is, I hope it does not create any issues with Flashpap not importing it.
-- Rich
Links to Download OSCAR here
OSCAR Installation and Setup

Using Attachments to Post Images on Apnea Board

INFORMATION ON FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.

Post Reply Post Reply
#7
RE: Resmed 11
The Identification file (either tgt or json) contains hardware configuration data and possibly some software version information. The hardware won't change, and OSCAR doesn't look at the rest of the file. No worries.
Apnea Board Monitors are members who help oversee the smooth functioning of the Board. They are also members of the Advisory Committee which helps shape Apnea Board's rules & policies. Membership in the Advisory Members group does not imply medical expertise or qualification for advising Sleep Apnea patients concerning their treatment.
Post Reply Post Reply
#8
RE: Resmed 11
If your FlashAir is a W-04, then you can drop FlashPAP and use other methods to download your data. Depending on the O/S you're using, you could activate WebDAV on the FlashAir and use rsync or SyncToy2 for Windows to download the newer data.
Crimson Nape
Apnea Board Moderator
www.ApneaBoard.com
___________________________________
Useful Links -or- When All Else Fails:
The Guide to Understanding OSCAR
OSCAR Chart Organization
Attaching Images and Files on Apnea Board
Apnea Helpful Tips

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply



New Posts   Today's Posts


About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.