Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

Resmed AirSense 10 = junk?
#1
Resmed AirSense 10 = junk?
Hi, I got a new CPAP machine in October, a Resmed AirSense10. It worked for a while, then at the end of December I began receiving error messages about my tubing, "humidifier error, replace your tubing". It would not use the water in the chamber and just blow cold, dry air down my nose all night. I unplugged the tubing and plugged it back in again and it seemed to work again. But aftet a week it began to give me the error no matter what I tried, off and on. I finally got up to the company I'm using (about 35 minutes away on a good day) and since I have a warranty they swapped out the machine entirely, including throwing in a new power cord. I go to plug it in at home and the port is extremely loose...like you barely touch the cord where it connects to the machine and comes out! Are these machines really this crappy or am I just having bad luck??? I really don't want to have to keep driving 35 minutes away to replace machines, especially since traffic that way is usually horrendous, what with the construction and all. Why can't things just work? Sad Sad
Post Reply Post Reply
#2
RE: Resmed AirSense 10 = junk?
Wow I can't even get this thing to turn on, because the port and the connection are too loose to connect. Resmed sucks. My fisher & paykel worked for five years!
Post Reply Post Reply
#3
RE: Resmed AirSense 10 = junk?
If your supplier carries the Respironics PR System One Auto 60 series, go get it. Otherwise, you need them to swap again. If you could start the Resmed machine long enough, it would be interesting to see the machine hours to determine if you got swapped into a used machine. Sure sounds like you did.
Sleeprider
Apnea Board Moderator
www.ApneaBoard.com

____________________________________________
Download OSCAR Software
Soft Cervical Collar
Optimizing Therapy
Organize your OSCAR Charts
Attaching Files
Mask Primer
How To Deal With Equipment Supplier


INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#4
RE: Resmed AirSense 10 = junk?
There have been a number of people here who have had AirSense 10 machines. There haven't been a lot of reports of reliability problems. ResMed machines have been reliable in general.
Get the free OSCAR CPAP software here.
Useful links.
Click here for information on the main alternative to CPAP.
If it's midnight and a DME tells you it's dark outside, go and check it yourself.
Post Reply Post Reply
#5
RE: Resmed AirSense 10 = junk?
Wow - this doesn't make me feel very good. I am newly diagnosed and new to these boards. I picked up the machine yesterday and it was this exact machine. I was wondering too - if I got a brand new machine or a used one - is there anyway to tell?
Post Reply Post Reply
#6
RE: Resmed AirSense 10 = junk?
(01-14-2015, 02:03 AM)Sweet72947 Wrote: Wow I can't even get this thing to turn on, because the port and the connection are too loose to connect. Resmed sucks. My fisher & paykel worked for five years!

They can come to you to bring a machine. They have to make deliveries of O2, etc. and can put you on the list for that and it needs to be made priority since you need your machine. Don't give on that one. They deliver machines and set them up for clients all the time (I don't know about your DME specifically but it is a normal service offered, especially for those that are house bound). Since this is not your fault, they need to accommodate you and not 2 weeks from now.

Just my suggestion
Post Reply Post Reply
#7
RE: Resmed AirSense 10 = junk?
(01-14-2015, 01:53 AM)Sweet72947 Wrote: I began receiving error messages about my tubing, "humidifier error, replace your tubing".


I got my Airsense 10 in mid Dec. and got the same tubing message about a week ago. I called my DME supplier and got a puzzled doknow response. I did the same unplug-replug thing and killed the message. Machine has worked fine; but the message has returned a couple times since and been banished by the same procedure. I have a follow up in a couple weeks and that will be at the top of my list of discussion topics.
Post Reply Post Reply
#8
RE: Resmed AirSense 10 = junk?
"they swapped out the machine entirely, including throwing in a new power cord."

Since the power cord COMES with the machine, why was it necessary to "throw" in a new one? I'm wondering if they traded your fishy A10 with a red herring.

Call them up, and ask for a new in the box sealed at the factory sort of replacement instead of a machine that they had to find a cord to go with.
Post Reply Post Reply
#9
RE: Resmed AirSense 10 = junk?
I think I might have gotten a used machine. If I look in the "about" option under My Options it says run hrs 49, which shouldn't be if it's a new machine, right? I got my power cord today and that's fine, but I tried to turn it on, and it starts ramping up, stops at 4.0 and shuts off. It was blinking a little snowflake symbol and I discovered that my tubing has droplets of water in it. I cleaned that all out, and i hit run warmup, and the snoflake symbol changed to the wavy line symbol, hopefully I can make this work
I want to sleep! I miss my SleepStyle200 Sad
Post Reply Post Reply
#10
RE: Resmed AirSense 10 = junk?
It stopped shutting off, but it only ramps up to 4.0 and just sits there. I went into the clinical settings and while I'm able to adjust the pressure if I want, some options are still shaded out, such as the ramp time and start pressure. The start pressure is set to 4.0. Before I swapped the machine, it ramped all the way up to 8. Why would this one be set to start at 4, and why in the clinical settings menu would some options still be shaded out? I don't get it?
Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
Angry ResMed AirSense 10 Burn Smell bsullivan 70 25,805 2 hours ago
Last Post: her.suit
Question New CPAP User - Help Please - ResMed Airsense 11 Autoset Pawpri 21 417 4 hours ago
Last Post: Pawpri
  From DreamStation to AirSense 10 or AirSense 11 xaid 7 616 03-20-2024, 04:57 PM
Last Post: labrat
  Semi-permanently disabling modem in ResMed Airsense 10 Sleep87 109 67,612 03-19-2024, 11:27 PM
Last Post: ivanvargas1
  [Equipment] ResMed AirSense 11 compatible pulse oximeters timtaller 63 25,799 03-16-2024, 11:27 AM
Last Post: e727147
  What happens when SD card fills? - Resmed Airsense 10 Craigtech 1 228 03-10-2024, 04:12 PM
Last Post: stevew168
  Setting time and date on Resmed Airsense 10 cmadon 42 32,179 03-08-2024, 09:13 AM
Last Post: Sleeprider


New Posts   Today's Posts


About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.