Resmed Aircurve 10 VAuto SD card type
I have a new to me (used) ResMed machine coming, hopefully by Friday.
Reading the manual I received, it just says it uses an SD card. The picture in the manual seems to be a normal "large" SD card. The manual does not specify the card.
If there's no card, what should I get? Speed or class rating? Any SD's to avoid? Presume there is little reason to buy anything bigger than 4GB. My old machine has 2GB and after 5 years it's nowhere near full.
Thanks!
RE: Resmed Aircurve 10 VAuto SD card type
Hi happydreams,
Any brand, any size up to 32G. It is suggested not to get a hi-density card in a Standard SD carrier, as some have had issues with those. It needs to be formatted as FAT32, or just erase it and let the new machine format it when you first insert it.
A.Becker
PAPing in NE Ohio, with a pack of Cairn terriers
RE: Resmed Aircurve 10 VAuto SD card type
Sorry I didn't search. Gee, there already was a thread on this page. Apologies.
RE: Resmed Aircurve 10 VAuto SD card type
We will let that one pass unpunished. If you do it again, you buy coffee. 
INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEBSITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
RE: Resmed Aircurve 10 VAuto SD card type
As a precaution, because you have no idea what the previous owner changed. Do a ReSet to Factory before you program settings for yourself. When we give settings we assume that before we started all other settings are at their default settings. I and others here have been bit by that detail.
RE: Resmed Aircurve 10 VAuto SD card type
(10-21-2020, 08:21 PM)SarcasticDave94 Wrote: We will let that one pass unpunished. If you do it again, you buy coffee. You apparently love your coffee! Me too!
RE: Resmed Aircurve 10 VAuto SD card type
(10-21-2020, 08:35 PM)bonjour Wrote: As a precaution, because you have no idea what the previous owner changed. Do a ReSet to Factory before you program settings for yourself. When we give settings we assume that before we started all other settings are at their default settings. I and others here have been bit by that detail. Thanks for the recommendation!
That must of been a tough one to figure out. And even worse to realize that that same detail bit the group more than once. Hope to have the machine by the weekend.
RE: Resmed Aircurve 10 VAuto SD card type
Odds are that you and your new machine are fine, but it never hurts to be sure.
10-23-2020, 01:21 PM
(This post was last modified: 10-23-2020, 01:23 PM by happydreams.)
RE: Resmed Aircurve 10 VAuto SD card type
(10-21-2020, 08:35 PM)bonjour Wrote: As a precaution, because you have no idea what the previous owner changed. Do a ReSet to Factory before you program settings for yourself. When we give settings we assume that before we started all other settings are at their default settings. I and others here have been bit by that detail.
I have the machine! Yay! Just turned it on. I have a new SD card to put in it. Stuck it in.
By reset to factory do you mean "Erase Data" or "Restore Defaults" or both?
Nevermind, I just did both.
RE: Resmed Aircurve 10 VAuto SD card type
Should be OK as you did both.
INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEBSITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
|
