Appreciate any help here at figuring this out.
Hello Guest,
Welcome to Apnea Board !As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address. Login or Create an Account
Resmed Airsense s10 Autoset Question
|
04-06-2016, 06:06 PM
Resmed Airsense s10 Autoset Question
I just got my s9 upgraded to an s10 autoset and have a question about the my options menu. I just watched a youtube video as well as read a thread on here about it and both showed some options under "My Option" in the menu that I don't see on my machine and was hoping someone could possibly explain how to access or if maybe the machine I was provided (which they said was new) maybe has old software or something. My Options menu shows Ramp Time, Humidity Level, Mask, Run Mask Fit, Run Warmup and Airplane Mode. The My Options menu I see on youtube and that is mentioned on this forum includes the options listed above plus - Pressure Relief (this is what I care most about as it sounds like it would help me), Climate Control, Smart Start, Tube Temp (don't care about this right now because I have a slimline tube).
Appreciate any help here at figuring this out.
RE: Resmed Airsense s10 Autoset Question
I think there is a setting in the clinician menu to give the patient full or limited access to what you can control.
You should request the clinician manual by email using the link at the top of the page... "CPAP Setup Manuals." You enter the clinician menu by holding down the knob and home button simultaneously for 3 seconds. I cannot guide you to the menu item you need to change --- but the manual will have a flow chart. Admin Note:
JustMongo passed away in August 2017
Click HERE to read his Memorial Thread ~ Rest in Peace ~
04-06-2016, 06:46 PM
RE: Resmed Airsense s10 Autoset Question
(04-06-2016, 06:06 PM)jhtrader Wrote: I just got my s9 upgraded to an s10 autoset and have a question about the my options menu. I just watched a youtube video as well as read a thread on here about it and both showed some options under "My Option" in the menu that I don't see on my machine and was hoping someone could possibly explain how to access or if maybe the machine I was provided (which they said was new) maybe has old software or something. My Options menu shows Ramp Time, Humidity Level, Mask, Run Mask Fit, Run Warmup and Airplane Mode. The My Options menu I see on youtube and that is mentioned on this forum includes the options listed above plus - Pressure Relief (this is what I care most about as it sounds like it would help me), Climate Control, Smart Start, Tube Temp (don't care about this right now because I have a slimline tube). I just got my Autoset also, I have most of those, I think the climate control is only available if you have the heated hose, at least that is my theory cause I haven't found it on mine. The rest are there.
I am not a Medical professional and I don't play one on the internet.
Started CPAP Therapy April 5, 2016 I'd Rather Be Sleeping
04-06-2016, 06:47 PM
RE: Resmed Airsense s10 Autoset Question
(04-06-2016, 06:38 PM)justMongo Wrote: I think there is a setting in the clinician menu to give the patient full or limited access to what you can control. Thanks. I accessed the clinician menu but didn't see anything to change so that I could see that. Will request the CPAP Setup Manual - thanks!
04-06-2016, 06:52 PM
RE: Resmed Airsense s10 Autoset Question
(04-06-2016, 06:46 PM)FrankNichols Wrote:(04-06-2016, 06:06 PM)jhtrader Wrote: I just got my s9 upgraded to an s10 autoset and have a question about the my options menu. I just watched a youtube video as well as read a thread on here about it and both showed some options under "My Option" in the menu that I don't see on my machine and was hoping someone could possibly explain how to access or if maybe the machine I was provided (which they said was new) maybe has old software or something. My Options menu shows Ramp Time, Humidity Level, Mask, Run Mask Fit, Run Warmup and Airplane Mode. The My Options menu I see on youtube and that is mentioned on this forum includes the options listed above plus - Pressure Relief (this is what I care most about as it sounds like it would help me), Climate Control, Smart Start, Tube Temp (don't care about this right now because I have a slimline tube). I think you are probably right about the heated hose. I like the idea of a pressure relief setting to reduce pressure when exhaling so that is the setting I am most interested in being able to access. I just sent an email asking for the clinician manual. Thanks!
04-06-2016, 07:41 PM
RE: Resmed Airsense s10 Autoset Question
(04-06-2016, 06:47 PM)jhtrader Wrote:(04-06-2016, 06:38 PM)justMongo Wrote: I think there is a setting in the clinician menu to give the patient full or limited access to what you can control. There is an option int eh Clinician menu that is something like extended (I am not at my machine right now) and you need to set that and then you can see the clinician data is the report screen.
I am not a Medical professional and I don't play one on the internet.
Started CPAP Therapy April 5, 2016 I'd Rather Be Sleeping
04-06-2016, 07:49 PM
RE: Resmed Airsense s10 Autoset Question
(04-06-2016, 07:41 PM)FrankNichols Wrote:(04-06-2016, 06:47 PM)jhtrader Wrote:(04-06-2016, 06:38 PM)justMongo Wrote: I think there is a setting in the clinician menu to give the patient full or limited access to what you can control. Don't see that but already set the Essentials to Essentials Plus - maybe that is what you are referring too. Still not giving me access to the "Pressure Relief" setting. Thanks.
04-06-2016, 07:54 PM
RE: Resmed Airsense s10 Autoset Question
(04-06-2016, 07:49 PM)jhtrader Wrote: Don't see that but already set the Essentials to Essentials Plus - maybe that is what you are referring too. Still not giving me access to the "Pressure Relief" setting. Thanks. Yup, Essentials, and nope, it is access to more values when looking at your sleep report. I think what you are looking for is Exhale Pressure Relief? If so, it is in the Clinician Menu -> Comfort -> EPR = ON/OFF. You can turn it on and set the amount the pressure is reduced when exhaling, or you can turn it off and it will be more PURE CPAP with inhale and exhale the same pressure. Frank
I am not a Medical professional and I don't play one on the internet.
Started CPAP Therapy April 5, 2016 I'd Rather Be Sleeping
04-06-2016, 08:33 PM
RE: Resmed Airsense s10 Autoset Question
(04-06-2016, 07:54 PM)FrankNichols Wrote:(04-06-2016, 07:49 PM)jhtrader Wrote: Don't see that but already set the Essentials to Essentials Plus - maybe that is what you are referring too. Still not giving me access to the "Pressure Relief" setting. Thanks. I set the EPR to 3 which is the same setting I had on my S9. I am pretty sure there is an additional setting for some reason labeled "Pressure Relief" in addition to the EPR. Seems redundant but that is what the video shows and what was posted on here on a review posting.
04-06-2016, 08:52 PM
RE: Resmed Airsense s10 Autoset Question
(04-06-2016, 08:33 PM)jhtrader Wrote: I set the EPR to 3 which is the same setting I had on my S9. I am pretty sure there is an additional setting for some reason labeled "Pressure Relief" in addition to the EPR. Seems redundant but that is what the video shows and what was posted on here on a review posting. Er, you want a "Pressure Relief" in *addition* to the "Expiratory Pressure Relief" you just set to 3???? nope. |
« Next Oldest | Next Newest »
|
Possibly Related Threads... | |||||
Thread | Author | Replies | Views | Last Post | |
Suggested Settings Switching AirSense 10 CPAP to AirSense 11 APAP | Rickyricardo | 2 | 64 |
6 hours ago Last Post: SarcasticDave94 |
|
New CPAP User - Help Please - ResMed Airsense 11 Autoset | Pawpri | 53 | 1,448 |
Yesterday, 05:25 PM Last Post: Pawpri |
|
[Equipment] What Is Autoset (ResMed) 10 and Can It Be Disabled? | Rickyricardo | 2 | 66 |
Yesterday, 03:07 PM Last Post: Rickyricardo |
|
Resmed Airsense 10 time to return to low pressure setting | jfchap | 3 | 134 |
04-13-2024, 03:54 PM Last Post: SarcasticDave94 |
|
ResMed AirSense 10 Burn Smell | bsullivan | 74 | 26,994 |
04-11-2024, 09:33 PM Last Post: her.suit |
|
Extremely high CA readings on the ResMed Airsense 11 | Soleil211 | 1 | 136 |
04-08-2024, 11:37 AM Last Post: Sleeprider |
|
[Treatment] ResMed Autoset 11 Settings Optimization | anker9000 | 0 | 134 |
04-02-2024, 11:34 AM Last Post: anker9000 |