Does anyone know what the system does with these settings. All I can think of is that it might be an input to the algorithm that decides what constitutes a large leak.
Hello Guest,
Welcome to Apnea Board !As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address. Login or Create an Account
Resmed Mask settings
|
10-06-2019, 03:26 PM
Resmed Mask settings
My Resmed AS10 can be told the type of mask in use, the settings being Nasal, Pillow and Full Face.
Does anyone know what the system does with these settings. All I can think of is that it might be an input to the algorithm that decides what constitutes a large leak.
10-06-2019, 03:54 PM
RE: Resmed Mask settings
Partly, but also the through-put flow in order to purge the internal volume likely for someone using a given style of mask. As we exhale, we fill the void under the mask with exhaust air, and that should be handily flushed clear prior to the next inhalation.
10-06-2019, 06:24 PM
(This post was last modified: 10-06-2019, 06:26 PM by ragtopcircus.)
RE: Resmed Mask settings
The pressure drop in the mask is proportional to the airflow and the resistance of the mask. This is also true for the hose (and bacterial filter if used).
If no air is flowing, then the delivered therapy pressure is the same as the pressure measured in the machine. If air is flowing though, then the machine has to compensate for the pressure drops. Volume has already been mentioned, and there’s also the designed leak rate. Ideally, there would be separate controls for the leak rate, volume, and flow restriction, but that would probably be too complicated (even though the data is in mask user guides). So, they simplify it to three broad categories for ResMed, or 5 obfuscated levels for Respironics. |
« Next Oldest | Next Newest »
|
Possibly Related Threads... | |||||
Thread | Author | Replies | Views | Last Post | |
[Equipment] Resmed F30i Mask | ditron1 | 3 | 133 |
04-23-2024, 11:33 AM Last Post: cps22 |
|
ResMed mask settings - what changes in each type? | skypony | 11 | 17,299 |
04-20-2024, 09:21 AM Last Post: cps22 |
|
[Treatment] ResMed Autoset 11 Settings Optimization | anker9000 | 0 | 154 |
04-02-2024, 11:34 AM Last Post: anker9000 |
|
New CPAP user - Fine Tuning Settings/Mask Help | slowmo2000 | 0 | 306 |
01-31-2024, 11:58 PM Last Post: slowmo2000 |
|
Using DreamWisp Nasal Mask With ResMed AirSense 11 | Avign0n323 | 2 | 430 |
01-31-2024, 01:17 PM Last Post: Avign0n323 |
|
Resmed Airfit P30i Nasal Pillows Mask Leak Question | fuzz | 2 | 548 |
01-25-2024, 03:10 PM Last Post: fuzz |
|
[Treatment] Oscar/ Dialing in Settings / ResMed 11 | Jintyo76 | 2 | 359 |
01-10-2024, 11:50 PM Last Post: Jintyo76 |