Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

Resmed S9 Auto - No LCD Display when starting Therapy?
#1
Hi,

Recently got a new s9 cpap auto from resmed.
When you started the therapy the only thing that is showing in the home button.

was the gauge/pressure you were in.

On the top of the pressure gauge it's totally blank??? I believe there should be something that shows Leak/MV/ etc...

Is this normal? How can i fix it.

Pls. help... thanks a lot!
Post Reply Post Reply
#2
Go to the links above and ask for the clinicians manual. The data you are looking for can be accessed there. The more important ones for your comfort will include humidity and EPR settings.
Post Reply Post Reply
#3
Hi,

I believe i just need to press two buttons to go inside. I can view it from there. however is it normal that it doesn't show on LCD (Home button) while on therapy??

Cause i've seen that you should see the Leak rate/MV/ RR etc on main LCD while you're on therapy..


is there any settings i need to change to view this while on therapy..? Thanks!
Post Reply Post Reply


#4
I've never attempted to look at this information while trying to go to sleep; it is available when you awaken. But then again I do not use the VPAP S9. You'll have to wait until other members respond to your question.
INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. 
ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA.
INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINIONS ONLY AND NOT NECESSARILY STATEMENTS OF FACT.
Post Reply Post Reply
#5
i use the s9 vpap auto and I cannot see the leak rate, pressure rate, etc. without going into the menu to look at it. If I have ever done it, I just don't recall it. I either download the sd card or look in the menu when I wake up.
Post Reply Post Reply
#6
Thanks a lot for your replies..

I actually use a S9 Cpap Auto now. I've tried vpap in the past. but can't the same lcd screen i had before where you can see the Leak, MV, RR, 95% etc..

Pls. see below picture.
[attachment=1430]

Is it normal? thanks in advance.
Post Reply Post Reply


#7
Looks like my S9 VPAP; except, since I use a standard hose, my humidifier setting shows in the window as "5.0"
Post Reply Post Reply
#8
That's how my home screen looks as well. The way I see it, I don't need to see the info on the screen while I'm sleeping, so I just pop my sd card in the computer in the morning and use sleepyhead. As far as seeing leak rate, you should be able to tell just by feel if your mask is leaking.
Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  AHi Changes Starting CPAP and Weight Hojo 10 320 6 hours ago
Last Post: SarcasticDave94
  [CPAP] ResMed AirSense 10 – therapy partial data, cellular transmission Roger Oscar Lima 9 227 10 hours ago
Last Post: Walla Walla
  Finally diagnosed and soon to be starting treatment... bb0490 2 143 10-13-2017, 11:30 PM
Last Post: bonjour
  [Treatment] Starting treatment tonight - some questions. taha 30 619 10-10-2017, 09:18 AM
Last Post: taha
  Returning To Therapy with Startling Results OldMarineOceanside 95 3,109 10-06-2017, 05:02 PM
Last Post: OldMarineOceanside
  My Experience So Far (and thoughts on changes to therapy) Esq. 30 776 10-05-2017, 01:22 PM
Last Post: Esq.
  I changed my resmed AirSense 10 Autoset to auto jasonarmstrong 6 427 09-20-2017, 12:29 PM
Last Post: jasonarmstrong

Forum Jump:

New Posts   Today's Posts




About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.

For any more information, please use our contact form.