Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

Resmed air curve 10 vauto machine not detecting sleep time accurately anymore??
#1
Resmed air curve 10 vauto machine not detecting sleep time accurately anymore??
My Aircurve 10 vauto stopped detected the full amount of time I am sleeping a couple of months ago but I didn't care because my sleep was going well. But in the past month or so I've been waking up with headaches again like I'm having lots of events in my sleep. So I downloaded OSCAR again and uploaded my info but unfortunately all it the program sees is what the machine is showing which last night it says I slept a little over two hours when in reality I slept a little over 7 hours. Also the actual numbers that it is reporting seem wildly off.

Has anyone else had this problem and if so were you able to fix it?



Attached Files Thumbnail(s)
           
Post Reply Post Reply






Donate to Apnea Board  
#2
RE: Resmed air curve 10 vauto machine not detecting sleep time accurately anymore??
Could you post sample OSCAR shots? We're visual learners around here.

Any chance you use Smart Start/Stop?

Was the SD card in the PAP before you slept?
Dave

OSCAR
Standard OSCAR Chart Order
Mask Primer
Dealing With A DME
Soft Cervical Collar Wiki
INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEBSITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#3
RE: Resmed air curve 10 vauto machine not detecting sleep time accurately anymore??
Here is the last image of data.


Attached Files Thumbnail(s)
   
Post Reply Post Reply
#4
RE: Resmed air curve 10 vauto machine not detecting sleep time accurately anymore??
Please repost your chart. We need to see the left sidebar along with the graphs.

Use the F12 key to take a Screenshot of the daily page. We need to see the following graphs: Events, flow rate, pressure, flow Limitations and leak rate.

Use the links in my signature line to guide you.

Thanks.
OpalRose
Apnea Board Administrator
http://www.ApneaBoard.com


OSCAR Chart Organization
OSCAR - The Guide
Soft Cervical Collar
Optimizing therapy





INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE.  ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA.  INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply






Donate to Apnea Board  
#5
RE: Resmed air curve 10 vauto machine not detecting sleep time accurately anymore??
Is it F12 on a Mac? Right now I have to go to work but I'll try somehow repost all of the info tomorrow.
Post Reply Post Reply
#6
RE: Resmed air curve 10 vauto machine not detecting sleep time accurately anymore??
Ok, try View > take screenshot.
http://www.apneaboard.com/wiki/index.php...ganization
OpalRose
Apnea Board Administrator
http://www.ApneaBoard.com


OSCAR Chart Organization
OSCAR - The Guide
Soft Cervical Collar
Optimizing therapy





INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE.  ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA.  INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#7
RE: Resmed air curve 10 vauto machine not detecting sleep time accurately anymore??
make sure the machine clock is set correctly. looks like your graph began at 12:00. resmed defines days as noon to noon.
  Shy   I have no particular qualifications or expertise with respect to the apnea/cpap/sleep related content of my posts beyond my own user experiences and what I've learned from others on this site. Each of us bears the burden of evaluating the validity and applicability of what we read here before acting on it.  
 
Post Reply Post Reply






Donate to Apnea Board  
#8
RE: Resmed air curve 10 vauto machine not detecting sleep time accurately anymore??
Honestly it doesn’t appear to keep time correctly anymore. If it was connected to the internet I would think it got a virus. But it’s completely off line so that’s not it. I’m going to use a Resmed for Her machine tonight I bought from another user on this forum when I first starting using cpap. I cannot stand another night full of apneas again with my aircurve machine. I think the issue might be central apneas since it’s a bilevel machine. I’ve read that they can cause them. That is the only thing I think it could be. Hopefully I can upload more data in the days to come and figure it all out because the sleep doctors I have seen in the past were completely worthless.
Post Reply Post Reply
#9
RE: Resmed air curve 10 vauto machine not detecting sleep time accurately anymore??
Is this problem occurring nightly?   Here are some things to do to help in locating your issue.
  1. If you have Smart Start turned on, turn it off.
  2. Record the total machine hours used, located in the Clinician's menu.  Do not use the sleep hours, listed in the Statistic's screen.   Compare the total time after a night's sleep.  Does the time differ greatly from the reported time in OSCAR?
  3. Replace the SD card.  Make sure that the replacement doesn't contain any data.
  4. If you have a spare power supply, substitute it for your current one.
  5. Depending on your knowledge and confidence level, replace the CR2032 internal battery.

Good luck!
- Red
Crimson Nape
Apnea Board Moderator
www.ApneaBoard.com
___________________________________
Useful Links -or- When All Else Fails:
The Guide to Understanding OSCAR
OSCAR Chart Organization
Attaching Images and Files on Apnea Board
Apnea Helpful Tips

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#10
RE: Resmed air curve 10 vauto machine not detecting sleep time accurately anymore??
And -- simple to do -- check the setting on the internal clock of your machine right before you go to bed, resetting it if necessary. The machine's clock does not set itself. Just before bedtime is recommended so you don't run into mid-day change-over hassles.
Post Reply Post Reply






Donate to Apnea Board  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Sleep PA changing pressure, wants sleep study. Can advice from here hurt my Medicare? midwestguy 99 1,850 57 minutes ago
Last Post: midwestguy
  [Equipment] Resmed machine vs Luna II dpcalandro 12 735 01-17-2022, 04:51 PM
Last Post: robertiv
  Inaccurate Insp. Time and Exp. Time with Airfit F20 mask and Airsense 10 modest811 13 296 01-11-2022, 09:55 PM
Last Post: 2SleepBetta
Exclaimation CPAP Machine Choices - read this before you accept a new machine SuperSleeper 228 205,580 01-11-2022, 07:10 PM
Last Post: Sleeprider
  Resmed AirCurve 10 vAuto check settings? hartator 34 1,823 12-26-2021, 05:53 PM
Last Post: hartator
  Purchased Machine Online - Dr. wants access to ResMed data via server xhwmikey 2 244 12-20-2021, 06:40 PM
Last Post: xhwmikey
  Noise coming from resmed f20 airtouch elbow and machine barberjp 3 191 12-18-2021, 10:44 AM
Last Post: barberjp


New Posts   Today's Posts






About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.