Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

Respironic REMSTAR plus 1005960 mfg start before 2005
#1
Respironic REMSTAR plus 1005960 mfg start before 2005
The forum instructions for provider setup mode for this device/model are not listed. The ones posted for REMSTAR plus do not apply to this model so through trial & error here is how to enter.
Note: setup menu times out if no entry in about 20 - 25 seconds
1) Turn on power
2) Hold down both ramp & heat buttons simultaneously until elevation # 1-3 appears. Unknown if this sets elevation or impacts ramp timing, ie how long before pressure increases to preset? 
3) use either ramp or heat button to change
4) tap power button to save & move to next program mode
5) cm h2o mode (4-10 cm options) appears to be pressure related? Possibly pressure of air, light mode 1 or 0, then unknown mode mine shows 36 unchangeable then next tap returns to a preset number 278.7 (which does not appear changeable). Unknown if this is pressure related but doubtful, I belueve is related to ramp timing? Would be nice to have the real Provider setup manual for this model.
6) unplugged power to exit setup mode.
7) After replugging in, holding down the heat button for 6 seconds allows you to enter heat program mode (1-5). I assume this effects the humidity level going into the tube when connected to a humidifier.
Perhaps forum admin can find "actual setup instructions" for this model and post as there appear to be variations on the REMSTAR plus. This has 3 bottons: power, heat, ramp. Ramp allows changing between two preset pressure levels
Post Reply Post Reply






Donate to Apnea Board  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Remstar Auto M Series "Service Required" msgill59 17 19,216 01-20-2022, 03:26 PM
Last Post: Jayt
  [split] REMStar 560P Humidifier Problems cpapmmark 0 76 12-14-2021, 05:25 PM
Last Post: cpapmmark
  [Equipment] Respironics PR System One 60 Series REMstar Auto with A-flex aavenger 6 320 11-12-2021, 06:03 AM
Last Post: quiescence at last
  New user sharing the start of my journey Smartyna 3 253 10-26-2021, 03:52 PM
Last Post: Big Guy
  at what point does it actually start to get better? mallwalker 4 334 10-06-2021, 09:57 PM
Last Post: SarcasticDave94
  Wondering Which Machine to Start With Zeliox 1 197 09-21-2021, 06:22 PM
Last Post: Zeliox
  Question re: Virtuox Ultra test with RemStar Auto A-Flex tonight. Help, please. Helena 2 221 08-30-2021, 06:57 PM
Last Post: Helena


New Posts   Today's Posts






About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.