Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

Respironic REMSTAR plus 1005960 mfg start before 2005
#1
Respironic REMSTAR plus 1005960 mfg start before 2005
The forum instructions for provider setup mode for this device/model are not listed. The ones posted for REMSTAR plus do not apply to this model so through trial & error here is how to enter.
Note: setup menu times out if no entry in about 20 - 25 seconds
1) Turn on power
2) Hold down both ramp & heat buttons simultaneously until elevation # 1-3 appears. Unknown if this sets elevation or impacts ramp timing, ie how long before pressure increases to preset? 
3) use either ramp or heat button to change
4) tap power button to save & move to next program mode
5) cm h2o mode (4-10 cm options) appears to be pressure related? Possibly pressure of air, light mode 1 or 0, then unknown mode mine shows 36 unchangeable then next tap returns to a preset number 278.7 (which does not appear changeable). Unknown if this is pressure related but doubtful, I belueve is related to ramp timing? Would be nice to have the real Provider setup manual for this model.
6) unplugged power to exit setup mode.
7) After replugging in, holding down the heat button for 6 seconds allows you to enter heat program mode (1-5). I assume this effects the humidity level going into the tube when connected to a humidifier.
Perhaps forum admin can find "actual setup instructions" for this model and post as there appear to be variations on the REMSTAR plus. This has 3 bottons: power, heat, ramp. Ramp allows changing between two preset pressure levels
Post Reply Post Reply






Donate to Apnea Board  


Possibly Related Threads...
Thread Author Replies Views Last Post
  DS2 Opti-Start Setting? StratCat48 1 185 06-11-2022, 06:42 AM
Last Post: sawinglogz
  Need instructions for pressure adjustment REMSTAR CHOICE M367500E John Dale 1 205 03-25-2022, 02:21 AM
Last Post: John Dale
Smile [CPAP] Start with APAP or go directly to BIPAP? Salchicha 9 737 02-25-2022, 04:17 AM
Last Post: Salchicha
  Remstar Auto M Series "Service Required" msgill59 17 22,941 01-20-2022, 03:26 PM
Last Post: Jayt
  [split] REMStar 560P Humidifier Problems cpapmmark 0 221 12-14-2021, 05:25 PM
Last Post: cpapmmark
  [Equipment] Respironics PR System One 60 Series REMstar Auto with A-flex aavenger 6 551 11-12-2021, 06:03 AM
Last Post: quiescence at last
  New user sharing the start of my journey Smartyna 3 406 10-26-2021, 03:52 PM
Last Post: Big Guy


New Posts   Today's Posts






About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.