S9 autoset problem

[zonk]

Last night i finally got fed up and changed to a straight CPAP mode which helped, but I prefer to use the autoset mode if possible... I used low 12 and high 20 Auto setting, for a prescribed CPAP setting of 16. Anyone else had this issue?

Since you're happy with 16 CPAP, try Auto 12-16 and see how it goes

[Shamus54]

From everything I've read in the past, the S9 autoset is supposed to auto titrate changing/delivering the pressure you need... Mine just seems to go to the max setting and stay there after I fall asleep, (which is a malfunction in my thinking?).

I have the same problem with my S9. My breathing patterns give it a false positive and cause the S9 to go to the highest setting. I've found that a straight pressure works the best for me. Some people (like me) just weren't built for auto titration.

I think perhaps I should lower my max setting to around 17 instead of 20? The ResMed Tech Support guy said I should lose some weight...

---

Last night i finally got fed up and changed to a straight CPAP mode which helped, but I prefer to use the autoset mode if possible... I used low 12 and high 20 Auto setting, for a prescribed CPAP setting of 16. Anyone else had this issue?

Since you're happy with 16 CPAP, try Auto 12-16 and see how it goes

Exactly! Going to set it 12 to 17