Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

SD Card Data
#1
Hello all you sleepyheads,

I looked at my SD card by going to "Computer" then "Properties" and it shows 3.68 GB free of 3.72 GB. This tells me that my machine is not saving any data.

Here are the settings; can anyone tell what I must do?

Thank You!

Mode S/T
IPAP- 16.0
Epap- 8.0
BPM - 12
Ti - 1.0
Rise Time- on
Rise Time- 10
Ramp Start Pressure- 4.0
Patient Disc- Off
Tubing Type- Off
Tubing Type- 22
Apnea- Off
Mini Vent- Off
Backlight- Off
Language- Eng
HPA/CM H20- CMH20
Setup Pa- Leak
Humidifier- 5
Reset Th- no
Reset Bl - no
Provider- Off

******************************************************
Post Reply Post Reply
#2
Hi pogosix,
Which Respironics machine do you have?
I think if you take out the humidifier tank and turn the machine over, you'll find the model number on the bottom.
trish6hundred
Post Reply Post Reply
#3
(07-26-2013, 10:10 AM)trish6hundred Wrote: Hi pogosix,
Which Respironics machine do you have?
I think if you take out the humidifier tank and turn the machine over, you'll find the model number on the bottom.

The model number is 1061420


Thanks for responding
Post Reply Post Reply


#4
Hi pogosix,Usually, there is a name such as PR System 1 on the machine or something like that, I'm sorry if I confused you with my question.
trish6hundred
Post Reply Post Reply
#5
If the machine says Phillips Respironics and has the word "Plus" in the name, it is not data capable so the only thing it is writing on the card is hours used.

I think the 1420 is not data capable. I tried to look it up and couldn't find anything on it. PR has an odd system for identification.
PaulaO2
Apnea Board Moderator
www.ApneaBoard.com


Breathe deeply and count to zen.

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.




Post Reply Post Reply
#6
(07-26-2013, 10:34 AM)pogosix Wrote: The model number is 1061420
BiPAP S/T
Specifications http://bipapst.respironics.com/Specifications.asp
Quick start guide http://bipapst.respironics.com/PDF/BiPAP_QSGuide.pdf
Brochure http://bipapst.respironics.com/PDF/BiPAP_Brochure.pdf

Respironics BiPAP ST (newer, "PR System One" model) manual available via email (section 3)
http://www.apneaboard.com/adjust-cpap-pr...tup-manual

Post Reply Post Reply


#7
(07-26-2013, 09:30 AM)pogosix Wrote: Hello all you sleepyheads,

I looked at my SD card by going to "Computer" then "Properties" and it shows 3.68 GB free of 3.72 GB. This tells me that my machine is not saving any data.

It may be working perfectly well, but an SD card can store far more data than a CPAP machine needs. Your card has 40 MB in use, which is more than what my machine has used in 14 months. My ResScan data folder contains 8.9 MB of data for 294 nights. (Sometimes if I'm sleeping well I don't bother downloading it). Granted, I'm using an outdated machine made by ResMed, with limited data capabilities, but CPAP data files really aren't that big.

Post Reply Post Reply
#8
(07-26-2013, 09:30 AM)pogosix Wrote: Provider- Off
From Quick start guide http://bipapst.respironics.com/PDF/BiPAP_QSGuide.pdf

Provider mode: You can choose “ on ” or “off ” to enable or disable provider mode. Selecting “on” will put the device in provider mode
(and the device will not automatically return to patient mode when the screen times out or you select the Back option).
Selecting “ no ” keeps the device in patient mode

Setup parameter display ... Leak, RR, Vm, Vte

Setup parameter display: You can select which measured parameters will display on the Monitor Pressure screen. Choose from Leak, RR (Respiratory Rate), Min vent, or Vte. See the Measured Parameter section of the User Manual for more information

Post Reply Post Reply
#9
My PRS1 says the data card is 100% free all the time...yet there is actually 5 weeks worth of data on the card at present
I don't believe anything I hear and only half of what I see
Post Reply Post Reply


#10
(07-29-2013, 11:56 PM)spdklls99 Wrote: My PRS1 says the data card is 100% free all the time...yet there is actually 5 weeks worth of data on the card at present

The data takes up a minuscule amount of space. I think that it's a rounding issue... so that you might have something like 99.7% of space available, and it's rounded up to 100%. Once it gets down to 99.4%, it will probably say you have 99% free.

Smile

SuperSleeper
Apnea Board Administrator
www.ApneaBoard.com


INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.



Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Forgot to put SD card in S9, how to download data? Lanco 3 231 07-05-2017, 09:57 PM
Last Post: Lanco
  ResMed AirSense 10--SD data card? Agabaga 30 1,295 05-30-2017, 11:51 AM
Last Post: bonjour
  [Equipment] How to move data to new machine/sd card (Airsense 10) ac110 2 249 04-13-2017, 12:28 AM
Last Post: DeepBreathing
  data card ppowers 6 437 04-11-2017, 03:09 PM
Last Post: Matzaball2016
  How Much DATA will SD Card Hold steve823 7 430 03-29-2017, 03:47 PM
Last Post: pholynyk
  ResMed S9 SD Card "Invalid SD Card, erase card data?" MAPnea 31 32,232 03-14-2017, 09:34 AM
Last Post: Sleeprider
  Copy data from internal storage to SD card on Dreamstation bketchel 5 323 03-02-2017, 10:28 AM
Last Post: trish6hundred

Forum Jump:

New Posts   Today's Posts




About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.

For any more information, please use our contact form.