Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

SD Data Card Erasing data
#1
SD Data Card Erasing data
I normally pull out my SD card from ResMedS9 Autoset, read it on my computer and use Sleepyhead to see the analysis. Then I re-insert the SD card. For the past few days, when I re-insert the card into ResMed, it 'erases data' on the card, and then reads the data. The parameters are not changed. What is is happening?
Post Reply Post Reply
#2
RE: SD Data Card Erasing data
It's a hiccup in the software. You have the data in sleepyhead and the machine will keep stored the compliance. So just let the machine reformat it. make sure you use the lock tab on the SD card in sleepyhead, it helps with stopping the extra code bit.
mask fit http://www.apneaboard.com/wiki/index.php...ask_Primer
For auto-cpap, from machine data or software. You can set the min pressure 1 or 2cm below 95%. Or clinicians commonly use the maximum or 95% pressure for fixed pressure CPAP, this can also be used for min pressure.
https://aasm.org/resources/practiceparam...rating.pdf
Post Reply Post Reply
#3
RE: SD Data Card Erasing data
(01-30-2018, 10:32 AM)ajack Wrote: It's a hiccup in the software. You have the data in sleepyhead and the machine will keep stored the compliance. So just let the machine reformat it. make sure you use the lock tab on the SD card, it helps a bit.

Could you clarify what you mean in that bolded part, Ajack?
Post Reply Post Reply
#4
RE: SD Data Card Erasing data
I did change that a bit to be clearer, but the windows OS can write unwanted lines of code to the sd card, The S9 sees this as a corrupted card and wants to fix it. the model 10 has fixed it.
mask fit http://www.apneaboard.com/wiki/index.php...ask_Primer
For auto-cpap, from machine data or software. You can set the min pressure 1 or 2cm below 95%. Or clinicians commonly use the maximum or 95% pressure for fixed pressure CPAP, this can also be used for min pressure.
https://aasm.org/resources/practiceparam...rating.pdf
Post Reply Post Reply
#5
RE: SD Data Card Erasing data
Thanks! Btw, I didn't know that this was corrected in the 10 series. Glad to hear it, as that is what I have.
Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  New to OSCAR..Please Help me understand the data. *screenshots attached* Cowboys77 0 13 28 minutes ago
Last Post: Cowboys77
Question OSCAR Technology - Install & Data Aquisition Details EasySleep 3 76 7 hours ago
Last Post: EasySleep
  Journey to cure UARS. OSCAR data attached gzaw 3 821 Yesterday, 01:03 PM
Last Post: gzaw
  Analyzing OSCAR DATA givememyusername 0 56 Yesterday, 08:49 AM
Last Post: givememyusername
  New to CPAP Titration Study and OSCAR Data Help Needed slowmoto 0 52 03-17-2024, 07:09 PM
Last Post: slowmoto
  Help interpreting iMatrix resvent Data Adamby1047 0 56 03-16-2024, 12:59 PM
Last Post: Adamby1047
Sad Can someone help me analyze my OSCAR data? senseisaitama 3 141 03-15-2024, 06:28 PM
Last Post: senseisaitama


New Posts   Today's Posts


About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.