Post Reply 
SD card data wont load
Author Message
TheWerkz Offline

Preferred Members-2

Posts: 261
Joined: Oct 2012

Machine: ResMed S9 AutoSet
Mask Type: Full face mask
Mask Make & Model: ResMed Mirage Quattro
Humidifier: H5i & ClimateLine Hose
CPAP Pressure: Auto-CPAP 11 - 20
CPAP Software: ResScan SleepyHead

Other Comments:

Sex: Male
Location: Dallas, TX - USA - Planet Earth

Post: #11
RE: SD card data wont load
(03-17-2014 01:13 PM)me50 Wrote:  
Quote:I figured it out thanks everyone--keep the card in the machine!

and download it into sleepyhead twice per week so you don't lose the detailed data.

Actually, you only need to download the data into SleepyHead or ResScan 1 time every 7 days if you want to capture ALL the high resolution flow data, otherwise it's LIFO for last the 7 days of HR flow data.

If you don't care to see the flow graphs etc., then you only need to insert the card once every 30 days to still get all of the pertinent data, it (SD card) always has the last 7 days of high resolution data anyway but, you don't have to download high resolution data into ResScan if you don't want to see it, you don't have an option in SleepyHead to not download the high resolution flow data.

Ren
03-17-2014 05:34 PM
Find all posts by this user Post Reply Quote this message in a reply

Donate to Apnea Board
Richard-KW Offline

Members

Posts: 10
Joined: Feb 2014

Machine: ResMed S9 AutoSet
Mask Type: Full face mask
Mask Make & Model: ResMed Quatro FX
Humidifier: ResMed H5i
CPAP Pressure: 8-11
CPAP Software: ResScan SleepyHead

Other Comments: Plus O2 concentrator-FX mask Lg, Med Headgear

Sex: Male
Location: Midwest

Post: #12
RE: SD card data wont load
I just spent my fifth night on my new machine and the data loaded into SleepyHead just fine, but when I tried to import the fifth night from the SD card into ResScan, the fifth day showed zero compliance (3 minutes).
I tried again and no dice. Now, I know that the S9 AutoSet turns over to the new day at 12 noon, but that didn't make any difference yesterday. So, on the third try, instead of telling the program to discard any old data, I told it to overwrite it and that solved the problem and the proper time showed up. Oh, and I upload every day - not that I will continue to do so though. I will probably, eventually upload every six days.
Also, I'm having leakage blow on my left eye and had to reduce the 6 to 16 cm H2O down to 13 and tighten the straps (which I didn't want to do). That's driving me nuts and I'm awake several times a night! Thinking about the ResMed Mirage Quattro Med. That 16 is not etched in stone and the cpap police didn't knock on my door... yet.

Thanks for the board here and all the info. I've posted before, but this is my first posting since receiving my machine.

PS. My ResMed SD card is 2GB and Win7 properties says it's "FAT" (File Allocation Table) and that means it's FAT16 most likely since there hasn't been a FAT12 for decades. I saw somewhere here where someone thought they were formatted FAT32
04-07-2014 02:55 PM
Find all posts by this user Post Reply Quote this message in a reply
Bama Rambler Offline

Preferred Members-2

Posts: 213
Joined: Feb 2014

Machine: Respironics System One DS460TS
Mask Type: Full face mask
Mask Make & Model: F&P Simplus
Humidifier: DS6T
CPAP Pressure: 15 cmH2O
CPAP Software: SleepyHead EncoreBasic

Other Comments: xPAP, Best thing since sliced bread!

Sex: Male
Location: Southwest Alabama

Post: #13
RE: SD card data wont load
I tried the Quattro FX and never could get it to stop leaking. I have tried several and so far the Mirage Quattro and the Flexi-Fit 431 have been the best at not leaking. I have a Simplus at the house now and I plan on trying it tonight or tomorrow and will let you know how it works. I like the Flexi because it has a recess for the chin so it doesn't ride up on my face.

I'm a big guy but in all my masks I find the medium fits better than any other size.

Those SD cards are formatted FAT32, at least mine is.
04-07-2014 03:06 PM
Find all posts by this user Post Reply Quote this message in a reply

Donate to Apnea Board
Richard-KW Offline

Members

Posts: 10
Joined: Feb 2014

Machine: ResMed S9 AutoSet
Mask Type: Full face mask
Mask Make & Model: ResMed Quatro FX
Humidifier: ResMed H5i
CPAP Pressure: 8-11
CPAP Software: ResScan SleepyHead

Other Comments: Plus O2 concentrator-FX mask Lg, Med Headgear

Sex: Male
Location: Midwest

Post: #14
RE: SD card data wont load
(04-07-2014 03:06 PM)Bama Rambler Wrote:  I tried the Quattro FX and never could get it to stop leaking. I have tried several and so far the Mirage Quattro and the Flexi-Fit 431 have been the best at not leaking. I have a Simplus at the house now and I plan on trying it tonight or tomorrow and will let you know how it works. I like the Flexi because it has a recess for the chin so it doesn't ride up on my face.

I'm a big guy but in all my masks I find the medium fits better than any other size.

Those SD cards are formatted FAT32, at least mine is.

Thanks Bama. Didn't know whether to reply or PM. Don't mean to hijack a thread. Ok on the Fisher & Paykel masks. I looked them up. Also, besides Windows properties, I did a cmd.exe chkdsk g: and it also said FAT. I tried a known formatted FAT32 Micro SDHC and it says FAT32.
Also, I see you have a PR and I have a ResMed S9 AutoSet. BTW, on the back, it no longer says made in Australia, it says made in Singapore. I'll be interested in hearing how your new Simplus works for you. Richard
04-07-2014 07:09 PM
Find all posts by this user Post Reply Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  [Equipment] ResMed AirSense - Is there data storage on the SD card AND in the unit itself? FormerFed 19 2,509 11-03-2016 03:17 PM
Last Post: PreciousRoy
  No Data on SD Card jamr005 3 240 10-29-2016 08:22 PM
Last Post: trish6hundred
  [CPAP] Do sleep MD's use memory card data? beet 15 790 09-23-2016 07:25 PM
Last Post: richb
  Sleepyhead data vs. Doctor's data Daisylouu 8 1,412 09-01-2016 06:10 PM
Last Post: eseedhouse
  SD Card Data Question icyura10 4 479 08-15-2016 01:04 PM
Last Post: icyura10
  General questions on SD card data KSMatthew 12 1,004 07-05-2016 01:32 PM
Last Post: KSMatthew
  I forgot to re install data card in APAP rozenbob 3 581 05-29-2016 11:59 PM
Last Post: zonk

Forum Jump:

Who's Online (Complete List)