Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

SOMNOsupport soft for SOMNOtron 4
#1
Question 
SOMNOsupport soft for SOMNOtron 4
Hello everyone,

I recently got a SOMNOtron 4 device.

I would like to connect it to my PC, but I can't find SOMNOsupport software. Google doesn't help.

Maybe someone have this old software on the computer or CD?

Thanks in advance for your reply.
Post Reply Post Reply
#2
RE: SOMNOsupport soft for SOMNOtron 4
You can find software in the Private Files and Links Forum for some of the Weinmann somnosoft devices. I don't see the
Somnotron4 you list, but it may be compatible.

http://www.apneaboard.com/forums/Forum-P...-and-Links
OpalRose
Apnea Board Administrator
www.apneaboard.com

_______________________
OSCAR Chart Organization
How to Attach Images and Files.
OSCAR - The Guide
Soft Cervical Collar
Optimizing therapy
OSCAR supported machines
Mask Primer



INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE.  ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA.  INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#3
RE: SOMNOsupport soft for SOMNOtron 4
Dear OpalRose,
Thank you for reply.
Yes i was see this section of the forum.
You are right there is no software for my device.
I will try WEINMANNsupport soft later when I get the USB to RS485 converter maybe it will do.

But still, someone have the original SOMNOsupport soft for my device?

   
Post Reply Post Reply
#4
RE: SOMNOsupport soft for SOMNOtron 4
Hello Everyone,
"WEINMANNsupport" and "Prisma" soft not working with "SOMNOtron 4" via USB-RS485
But, frankly I'm used non-original converter I have no idea where to get original converter "WM 93318"

I'm lookig for "SOMNOsupport" old soft. Please report to this topic or to me in PM if you have this.
Post Reply Post Reply
#5
RE: SOMNOsupport soft for SOMNOtron 4
Also,
I’ve been trying to connect SOMNObalance e (without SD) to my PC for a week now.
WEINMANNsupport and prismaTS are installed on my PC, both programs do not connect to the device via a non-original usb-rs485 China-adapter.

Who has experience with the settings?
Post Reply Post Reply
#6
RE: SOMNOsupport soft for SOMNOtron 4
Your brand of CPAP seems to be more common in Europe than here in the U.S.A. An answer to your question may take a while.
Crimson Nape
Apnea Board Moderator
www.ApneaBoard.com
___________________________________
Useful Links -or- When All Else Fails:
The Guide to Understanding OSCAR
OSCAR Chart Organization
Attaching Images and Files on Apnea Board
Apnea Helpful Tips

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#7
RE: SOMNOsupport soft for SOMNOtron 4
Crimson Nape, I understand this, but I do not lose hope.
I am writing here not only to ask questions, I want here to have a guide for setting up SOMNO devices.

Looks like I found a solution for WEINMANNsupport to work with non-original adapters USB-RS485.
Follow these steps:
1. Install WEINMANNsupport software.
2. Open file MCC_Comm.cfg located inside Config folder after installation using a text editor (ex. Notepad++).
(Common location: "C:\Program files\Weinmann\Config\MCC_Comm.cfg").
3. Search for FastConverterboxCheck string.
4. Replace val = "1" by val = "0" for this line.
Result: <FastConverterboxCheck val = "0" />
5. Save file and close text editor.
6. Launch WEINMANNsupport and select the COM port in the options.
7. Start import from device.
8. Click YES on dialog window.
9. Enjoy.

This helped connect to SOMNObalance e, but does not help with SOMNOtron 4.
So I'm still looking for SOMNOsupport old soft.

Also please find pinout for RS485 connector on WEINMANN SOMNO devices:
PIN1: Analog ch2
PIN2: +12V
PIN3: RS485 A
PIN4: RS485 B
PIN5: GND (don't use for RS485!)
PIN6: Analog ch1

[Image: attachment.php?aid=23830]


Attached Files Thumbnail(s)
   
Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Löwenstein Prisma Soft - missing days bstabens 6 732 11-26-2023, 01:12 PM
Last Post: bstabens
  Data from Prisma Smart & Soft CPAP machines [no longer needed] GuyScharf 31 6,245 04-29-2023, 07:19 AM
Last Post: dannahaz
Arrow Difference between Response Standard, Soft and Autoset for Her mode skvbksc321 0 492 01-18-2023, 03:09 AM
Last Post: skvbksc321
  Soft Instalation - Prisma TS. Trouble... Andrey.ltd 3 5,727 09-28-2020, 07:34 AM
Last Post: wolle1001


New Posts   Today's Posts


About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.