Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

Setting the Time on RemStar Auto IQ 450 P
#1
The time units readout  on my RemStar AutoIQ 450P appears to be either not synchronized to the time zone I set in my Card Profile EST) or measuring on another base, such as hours after start. Daylight savings time is not checked in my profile. I assume time is  either set on the machine, or programmed at the factory to somehow runs continuously by time and date on the machine without battery, and then is adjusted by the computer during readout based on the profile time zone and date.  In either case I do not see the adjustment in the user manuals. If I start the machine around 12:00 the card readout seems to begin around 1:30.

Resent to include notification
Post Reply Post Reply
#2
I believe that P-R devices are set to GMT at the factory and don't offer any setting. If you use SleepyHead for analysis, you can set a time offset in the Preferences section.
______________________
Useful Links -or- When All Else Fails:
Posting SleepyHead Charts in 5 Easy Steps
Robysue's Beginner's Guide to Sleepyhead
Apnea Helpful Tips
Post Reply Post Reply
#3
(01-29-2017, 11:12 AM)HenryECole81 Wrote: The time units readout  on my RemStar AutoIQ 450P appears to be either not synchronized to the time zone I set in my Card Profile EST) or measuring on another base, such as hours after start. Daylight savings time is not checked in my profile. I assume time is  either set on the machine, or programmed at the factory to somehow runs continuously by time and date on the machine without battery, and then is adjusted by the computer during readout based on the profile time zone and date.  In either case I do not see the adjustment in the user manuals. If I start the machine around 12:00 the card readout seems to begin around 1:30.

Resent to include notification


Thanks you, C-N.  Yes I see the place to offset the time. I will check to see exactly when I turn on the machine tonight  to make an exact comparison.Assume it will be one hour, but offset will permit more precision.  Strange that the readout time does not shift when I change the profile from daylight to non daylight.  I guess I could also change my time zone.
Post Reply Post Reply




Possibly Related Threads...
Thread Author Replies Views Last Post
Question AirCurve 10 Humidity Setting capnman 14 174 Yesterday, 11:56 AM
Last Post: kiwii
  ResMed Airsense 10 Setting Date Problem Reuven Gruber 10 908 10-13-2017, 10:46 AM
Last Post: jaswilliams
  [Equipment] Setting mask type on Resmed Airsense 10 SleepyTimes 12 3,432 10-11-2017, 11:34 PM
Last Post: Reznik
  mask setting with dreamwear eeshwa 10 1,499 10-11-2017, 11:23 PM
Last Post: Reznik
  ACCESS Machine Blower Time zzzZorro 3 116 10-11-2017, 02:29 PM
Last Post: Sleepster
  Philips Respironics REMstar Auto 560P - Service Required kyley 4 206 09-25-2017, 05:24 PM
Last Post: kyley
  [Equipment] Respironics Remstar auto A- flex humidifier stopped working Reddog 4 159 09-19-2017, 09:29 AM
Last Post: Sleeprider

Forum Jump:

New Posts   Today's Posts




About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.

For any more information, please use our contact form.