Post Reply 
Setting time and date on Resmed Airsense 10
Author Message
cmadon Offline

New Members

Posts: 2
Joined: Sep 2014

Machine: ResMed AirSense 10 Elite
Mask Type: Full face mask
Mask Make & Model: unsure
Humidifier: Internal
CPAP Pressure: 15 cmH2O
CPAP Software: ResScan

Other Comments:

Sex: Male
Location: Knoxville, TN

Post: #1
Setting time and date on Resmed Airsense 10
I've got my Resmed Airsense 10's time and date all out of wack. I tried to adjust the time for the end of daylight savings time and have now got it two days and one hour ahead. When I try to set the correct time and date it tells me I can't set this to a past date.

Any ideas?

Thanks in advance.
11-10-2014 02:17 PM
Find all posts by this user Post Reply Quote this message in a reply

Donate to Apnea Board
zonk Offline

Advisory Members

Posts: 7,908
Joined: Feb 2012

Machine: A10 AutoSet
Mask Type: Nasal mask
Mask Make & Model: Activa LT
Humidifier: Integrated /ClimateLineAir
CPAP Pressure: 9/13
CPAP Software: ResScan

Other Comments: CPAP since Nov 2010

Sex: Male
Location: Australia

Post: #2
RE: Setting time and date on Resmed Airsense 10
Welcome to apnea board, cmadon

You need to erase the data before the machine can accept the changes, you might want to download SD card data first

From the A10 clinical manual:

Set the current date.
If you set a new date that occurs in the past then an error message is displayed. Before this change can be made, erase the compliance data available under the Configuration menu.

Set the current time.
If you set a new time that occurs in the past then an error message is displayed. Before this change can be made, erase the compliance data available under the Configuration menu.
11-10-2014 03:14 PM
Find all posts by this user Post Reply Quote this message in a reply
trish6hundred Offline

Advisory Members

Posts: 6,430
Joined: May 2012

Machine: Resmed S9 AutoSet for Her
Mask Type: Full face mask
Mask Make & Model: Fisher & Paykel Simplus
Humidifier: H5i Heated Humidifier
CPAP Pressure: 10 - 7-20 Cm H2O
CPAP Software: Not using software

Other Comments: I started CPAP in 2008. Totally blind since birth.

Sex: Female
Location: Missouri, USA

Post: #3
RE: Setting time and date on Resmed Airsense 10
Hi cmadon,
WELCOME! to the forum.!
Hang in there for more responses to your post and best of luck to you with your CPAP therapy.

trish6hundred
11-10-2014 03:31 PM
Find all posts by this user Post Reply Quote this message in a reply

Donate to Apnea Board
PaulaO2 Offline
Wiki Editor
Moderators

Posts: 8,065
Joined: Feb 2012

Machine: S9 Autoset
Mask Type: Full face mask
Mask Make & Model: F&P Simplus
Humidifier: H5i
CPAP Pressure: 14-20
CPAP Software: SleepyHead

Other Comments: Ehlers-Danlos Syndrome, Hypermobility Type; chronic sarcasm

Sex: Undisclosed
Location: western NC, USA

Post: #4
RE: Setting time and date on Resmed Airsense 10
Yeah, we've all done that at least once. Erasing the data is no big deal. Save the data from the card. Even make a full copy of it onto your hard drive if you want. Then start over on the machine.

When the time change means we have to change the time BACK an hour, we have to make sure we wait at least a full hour after we turn off the CPAP before doing it. Else we get the same error message.

PaulaO2
Apnea Board Moderator
www.ApneaBoard.com


Breathe deeply and count to zen.

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
11-10-2014 05:11 PM
Find all posts by this user Post Reply Quote this message in a reply
lab rat Offline

Advisory Members

Posts: 138
Joined: Nov 2014

Machine: Airsense 10 Autoset
Mask Type: Nasal pillows
Mask Make & Model: Resmed Airfit P10
Humidifier: Resmed Airsense 10 Autoset
CPAP Pressure: 8-16
CPAP Software: Not using software

Other Comments: Satisfied Resmed customer since March 1996

Sex: Male
Location: Australia

Post: #5
RE: Setting time and date on Resmed Airsense 10
Hate to be devils advocate but in the scheme of things does it matter if the time is out an hour during daylight saving months?

The aim of the therapy is to measure sleep incidents rather than the time you went to bed.
11-10-2014 07:57 PM
Find all posts by this user Post Reply Quote this message in a reply

Donate to Apnea Board
cmadon Offline

New Members

Posts: 2
Joined: Sep 2014

Machine: ResMed AirSense 10 Elite
Mask Type: Full face mask
Mask Make & Model: unsure
Humidifier: Internal
CPAP Pressure: 15 cmH2O
CPAP Software: ResScan

Other Comments:

Sex: Male
Location: Knoxville, TN

Post: #6
RE: Setting time and date on Resmed Airsense 10
Great! Thank you so much. Worked like a charm.

C.


(11-10-2014 05:11 PM)PaulaO2 Wrote:  Yeah, we've all done that at least once. Erasing the data is no big deal. Save the data from the card. Even make a full copy of it onto your hard drive if you want. Then start over on the machine.

When the time change means we have to change the time BACK an hour, we have to make sure we wait at least a full hour after we turn off the CPAP before doing it. Else we get the same error message.
11-10-2014 09:01 PM
Find all posts by this user Post Reply Quote this message in a reply
PaulaO2 Offline
Wiki Editor
Moderators

Posts: 8,065
Joined: Feb 2012

Machine: S9 Autoset
Mask Type: Full face mask
Mask Make & Model: F&P Simplus
Humidifier: H5i
CPAP Pressure: 14-20
CPAP Software: SleepyHead

Other Comments: Ehlers-Danlos Syndrome, Hypermobility Type; chronic sarcasm

Sex: Undisclosed
Location: western NC, USA

Post: #7
RE: Setting time and date on Resmed Airsense 10
(11-10-2014 07:57 PM)lab rat Wrote:  Hate to be devils advocate but in the scheme of things does it matter if the time is out an hour during daylight saving months?

The aim of the therapy is to measure sleep incidents rather than the time you went to bed.

It matters in some cases. Let's say you woke up, all panicky and sweaty. You glance at the clock and see the time. Later you look at the data to confirm if it was an event or just a bad dream. You'd have to remember if the time was right or not. Hour up or down?

For me, setting the clock on the machine also prevents me from dealing with the "day starts at noon" thing. I often sleep until 10:30 or 11. Yes, SH can fix it but it can hiccup sometimes. And then the screen is all wonky.

It's just easier to set the clock twice a year and be done with it.

PaulaO2
Apnea Board Moderator
www.ApneaBoard.com


Breathe deeply and count to zen.

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
11-10-2014 11:06 PM
Find all posts by this user Post Reply Quote this message in a reply

Donate to Apnea Board
canajun53 Offline

New Members

Posts: 1
Joined: May 2015

Machine: Airsense 10 Autoset
Mask Type: Nasal pillows
Mask Make & Model: ResMed Swift FX
Humidifier: ResMed
CPAP Pressure: Auto
CPAP Software: ResScan SleepyHead

Other Comments:

Sex: Male
Location:

Post: #8
RE: Setting time and date on Resmed Airsense 10
(11-10-2014 03:14 PM)zonk Wrote:  Welcome to apnea board, cmadon

You need to erase the data before the machine can accept the changes, you might want to download SD card data first

From the A10 clinical manual:

Set the current date.
If you set a new date that occurs in the past then an error message is displayed. Before this change can be made, erase the compliance data available under the Configuration menu.

Set the current time.
If you set a new time that occurs in the past then an error message is displayed. Before this change can be made, erase the compliance data available under the Configuration menu.

I realize this thread started and ended (sort of) a while ago but I, too, was just trying to find out how to change the time. When I got my machine, I used it for 3 nights before checking out all the settings. When I did check, I found the date was right but the time had been set for a different time zone, 3 hours ahead of my time.

Regardless of what the manual says you do not have to erase any data IF you turn the clock back after 12:00 noon. I got an error message when trying to turn it back before noon but had read in another thread that it could be done after noon so, after noon, I tried again and it worked!

The date was already set properly but I tried to turn it back, too, just to see if I could. Didn't work. I still got the error message.
06-12-2015 03:05 PM
Find all posts by this user Post Reply Quote this message in a reply
parkerdt Offline

Advisory Members

Posts: 256
Joined: May 2015

Machine: ResMed A10 AutoSet
Mask Type: Other
Mask Make & Model: WISP, Nuance
Humidifier: Climate Hose and included humidifier
CPAP Pressure: 9
CPAP Software: SleepyHead

Other Comments: I alternate between WISP and fabric Nuance - like both!

Sex: Male
Location: Mebane, NC

Post: #9
RE: Setting time and date on Resmed Airsense 10
Rather than erasing any data, could you just insert a blank SD card, set the date and time properly, then reinsert the original SD card?
06-14-2015 07:25 PM
Find all posts by this user Post Reply Quote this message in a reply

Donate to Apnea Board
sonicboom Offline

Advisory Members

Posts: 472
Joined: May 2015

Machine: Airsense 10 AutoSet
Mask Type: Nasal pillows
Mask Make & Model: ResMed AirFit P10, Dreamwear
Humidifier: Integrated
CPAP Pressure: 4.6-7.6
CPAP Software: ResScan SleepyHead

Other Comments:

Sex: Male
Location: Washington

Post: #10
RE: Setting time and date on Resmed Airsense 10
Nope. At least not before noon. Just tried it as I got a replacement yesterday and failed to note the time/date settings. When trying to change it I got the error message referred to above.

Coffee
07-29-2015 10:50 AM
Find all posts by this user Post Reply Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
Question ResMed AirSense 10 Badjo17 25 2,286 12-02-2016 11:02 AM
Last Post: Sleeprider
  Is this sound normal? - Resmed Airsense 10 Autoset Ronberta 8 1,217 11-29-2016 07:59 PM
Last Post: sonicboom
  Is it time to replace cushion on the mask worthog 3 198 11-26-2016 10:50 PM
Last Post: GP49
  [Equipment] ResMed Airsense 10 Quit Working SherrieR 4 225 11-26-2016 07:51 PM
Last Post: trish6hundred
Angry Resmed Airsense/Telstra 2G wireless kerput JamesW 2 192 11-24-2016 11:08 PM
Last Post: JamesW
  ResMed Airsense 10 Auto Set...Runaway Pressure Abnormal86 14 521 11-22-2016 11:39 PM
Last Post: sonicboom
  ASV/ Central apena - Time for a second opinion? Feisty Folder 6 311 11-21-2016 04:14 AM
Last Post: DeepBreathing

Forum Jump:

Who's Online (Complete List)