Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

Setup Manual for Respironics Aria LX?
#1
I have been a successful user since 1989. I recently acquired a Respironics Aria LX. I tried to set to18 and it set to default 3. Does anyone have a set-up manual or knows how to set? It is almost unused and a great back-up.
Post Reply Post Reply
#2
Hi Aria Ray
I couldn't find any instruction for Respironics Aria LX, but find the user manual and the instructions for Respironics Solo

User manual: [link to commercial DME site removed, instead please do a Google search for "UserGuideAriaLX.pdf"]

Instructions: First, with the machine plugged into a wall outlet, unplug the cord from the back of the CPAP. Now, press and hold the Pressure On/Off button (the round button on the left) and the Ramp button (the oblong button on the right) down at the same time while plugging the cord into the back of the CPAP.

The pressure setting will display. To change the pressure, press the Ramp button and the pressure will increase 1cm of water pressure each time you press the button.

When you stop pressing the Ramp button, the signal light will flash one time for each cm of pressure to correspond with the new pressure setting. If you wish to verify the setting again, press the Pressure On/Off button. The signal light will again flash one time for each cm of pressure.

To exit and save changes press and hold the On/Off button while pressing the Ramp button once. The machine should quit blowing and the green light should light up

Let us know if this works for you



-----
Moderator Action: Link Removed
To maintain our status as an educational organization, the only commercial links allowed in this forum are to CPAP-related manufacturer websites. This is stated in the Apnea Board Rules with details given in the Commercial Links Policy section.
-----

Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Auto to manual BPM experiment tmoody 16 487 10-16-2017, 08:58 AM
Last Post: tmoody
  Respironics Dreamstation problems Rimaggio 5 375 09-29-2017, 09:35 PM
Last Post: OpalRose
  Respironics System One BIPAP ST Jeanine 2 167 09-21-2017, 04:22 PM
Last Post: trish6hundred
  Respironics AutoSV Faulty? Greggory 5 173 09-18-2017, 02:48 PM
Last Post: Greggory
  AirCurve 10 VAUTO Setup Walla Walla 4 235 09-09-2017, 08:09 AM
Last Post: Walla Walla
  Respironics System One BiPAP ST helpl jgoole 5 185 09-09-2017, 05:14 AM
Last Post: jgoole
  [Admin Note] WANTED: CLINICIAN SETUP MANUAL for 60-series PR System One REMstar Plus w/ C-Flex SuperSleeper 4 339 08-27-2017, 09:06 PM
Last Post: Galactus

Forum Jump:

New Posts   Today's Posts




About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.

For any more information, please use our contact form.