Post Reply 
Sleep Master wireless XPAP data transfer
Author Message
Jack_Russell_Fan Offline

Preferred Members

Posts: 81
Joined: Nov 2014

Machine: PRS1 760P
Mask Type: Nasal pillows
Mask Make & Model: Tap Pap
Humidifier: PRS1 heated hose
CPAP Pressure: 15.5 - 6.5
CPAP Software: SleepyHead

Other Comments: Sleep Master wireless data transfer

Sex: Male
Location: Ellijay, GA

Post: #111
RE: Sleep Master wireless XPAP data transfer
Lately, there seems to be some confusion regarding Sleep Master and Flashpap.

Flashpap is a program written by someone else and requires manual configuration of the CONFIG file.

Sleep Master is written by me and does not require manual configuration of the CONFIG file. I do not advise trying to manually configure the CONFIG file on the FlashAir for Sleep Master! I also do not advise trying to use the same FlashAir with both programs at the same time, as only advanced users would be able
to set up the FlashAir for both programs. Sleep Master was designed to eliminate the need to manually configure the FlashAir.

Sleep Master must be installed in the users "documents" folder on the root drive of your computer. Sleep Master will not work if installed on a network drive.

Happy PaPing!

Tom
02-10-2016 04:10 AM
Find all posts by this user Post Reply Quote this message in a reply

Donate to Apnea Board
GelatinousSlime Offline

New Members

Posts: 1
Joined: Jan 2016

Machine: AirSense 10 AutoSet
Mask Type: Nasal pillows
Mask Make & Model: ResMed AirFit P10
Humidifier: built in
CPAP Pressure: 10-18
CPAP Software: SleepyHead

Other Comments:

Sex: Male
Location:

Post: #112
RE: Sleep Master wireless XPAP data transfer
I'm having some trouble getting this going in Arch Linux. I know you specifically state Ubuntu as the one you tested on, but I run Arch so obviously I'm hoping to get it to work on Arch too. Smile

Basically I'm stuck at the setup step where you choose the "drive" where the FlashAir is located. The drop-down is empty and there is an exception in the console where I ran the program from.

Code:
~/D/Sleep_Master_Java pwd
/home/kevin/Documents/Sleep_Master_Java
~/D/Sleep_Master_Java java -version
java version "1.8.0_74"
Java(TM) SE Runtime Environment (build 1.8.0_74-b02)
Java HotSpot(TM) 64-Bit Server VM (build 25.74-b02, mixed mode)
~/D/Sleep_Master_Java java -jar Sleep_Master.jar
Exception in thread "AWT-EventQueue-0" java.lang.NullPointerException
        at my.sleepmaster.SleepMasterUI.jComboBox3FocusGained(SleepMasterUI.java:1873)
        at my.sleepmaster.SleepMasterUI.access$1700(SleepMasterUI.java:69)
        at my.sleepmaster.SleepMasterUI$10.focusGained(SleepMasterUI.java:464)
        at java.awt.AWTEventMulticaster.focusGained(AWTEventMulticaster.java:220)
        at java.awt.Component.processFocusEvent(Component.java:6424)
        at java.awt.Component.processEvent(Component.java:6291)
        at java.awt.Container.processEvent(Container.java:2236)
        at java.awt.Component.dispatchEventImpl(Component.java:4891)
        at java.awt.Container.dispatchEventImpl(Container.java:2294)
        at java.awt.Component.dispatchEvent(Component.java:4713)
        at java.awt.KeyboardFocusManager.redispatchEvent(KeyboardFocusManager.java:1954)
        at java.awt.DefaultKeyboardFocusManager.typeAheadAssertions(DefaultKeyboardFocusMan​ager.java:986)
        at java.awt.DefaultKeyboardFocusManager.dispatchEvent(DefaultKeyboardFocusManager.j​ava:610)
        at java.awt.Component.dispatchEventImpl(Component.java:4762)
        at java.awt.Container.dispatchEventImpl(Container.java:2294)
        at java.awt.Component.dispatchEvent(Component.java:4713)
        at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:758)
        at java.awt.EventQueue.access$500(EventQueue.java:97)
        at java.awt.EventQueue$3.run(EventQueue.java:709)
        at java.awt.EventQueue$3.run(EventQueue.java:703)
        at java.security.AccessController.doPrivileged(Native Method)
        at java.security.ProtectionDomain$JavaSecurityAccessImpl.doIntersectionPrivilege(Pr​otectionDomain.java:76)
        at java.security.ProtectionDomain$JavaSecurityAccessImpl.doIntersectionPrivilege(Pr​otectionDomain.java:86)
        at java.awt.EventQueue$4.run(EventQueue.java:731)
        at java.awt.EventQueue$4.run(EventQueue.java:729)
        at java.security.AccessController.doPrivileged(Native Method)
        at java.security.ProtectionDomain$JavaSecurityAccessImpl.doIntersectionPrivilege(Pr​otectionDomain.java:76)
        at java.awt.EventQueue.dispatchEvent(EventQueue.java:728)
        at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:201​)
        at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:116)
        at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:105​)
        at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:101)
        at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:93)
        at java.awt.EventDispatchThread.run(EventDispatchThread.java:82)

   
02-10-2016 08:25 AM
Find all posts by this user Post Reply Quote this message in a reply
Jack_Russell_Fan Offline

Preferred Members

Posts: 81
Joined: Nov 2014

Machine: PRS1 760P
Mask Type: Nasal pillows
Mask Make & Model: Tap Pap
Humidifier: PRS1 heated hose
CPAP Pressure: 15.5 - 6.5
CPAP Software: SleepyHead

Other Comments: Sleep Master wireless data transfer

Sex: Male
Location: Ellijay, GA

Post: #113
RE: Sleep Master wireless XPAP data transfer
New version released today;

New in version 5.0.0.20
***** Improved connectivity for Mac and Ubuntu users.
​***** Now compatible with ARCH Linux!

http://www.sleepmaster.org/

Tom
03-01-2016 11:19 AM
Find all posts by this user Post Reply Quote this message in a reply

Donate to Apnea Board
Rick_V Offline

Preferred Members

Posts: 51
Joined: Jan 2016

Machine: Resmed Airsense 10 Autoset
Mask Type: Nasal pillows
Mask Make & Model: Airfit P10
Humidifier: Unsure
CPAP Pressure: 5-9
CPAP Software: ResScan SleepyHead

Other Comments: CPAPing since 2006

Sex: Male
Location: Fort White, Fl.

Post: #114
RE: Sleep Master wireless XPAP data transfer
Trying to get this to work. It is stuck trying to find the card. Also the MAC Address for 192.168.0.112 is not the one that is on the card which BTW has 13 characters.

[attachment=2216]

I have 3 wireless routers in the house one is the one from the DSL provider, the other 2 are connected to it through wired connections. Also I have a 4th access point with a Directv Genie system. Could it be trying to connect to one of the other routers and that is what is causing the problem.
(This post was last modified: 03-01-2016 02:45 PM by Rick_V.)
03-01-2016 02:36 PM
Find all posts by this user Post Reply Quote this message in a reply
Crimson Nape Offline

Monitors

Posts: 1,325
Joined: Oct 2014

Machine: ResMed S9 Autoset
Mask Type: Other
Mask Make & Model: P-10 / F&P Simplus / DreamWear
Humidifier: H5i w/Climateline
CPAP Pressure: 8 - EPR 3
CPAP Software: SleepyHead

Other Comments: CMS-50F & 50IW

Sex: Male
Location: Georgia

Post: #115
RE: Sleep Master wireless XPAP data transfer
(03-01-2016 02:36 PM)Rick_V Wrote:  Trying to get this to work. It is stuck trying to find the card. Also the MAC Address for 192.168.0.112 is not the one that is on the card which BTW has 13 characters.

The MAC address can only be 6 paired digits, 12 characters long total, each pair separated by a colon (':'). The value of each digit can only range from 0-9 and A-F (16 unique digits in all). The MAC address will display like: 11:22:33:44:55:66

I hope this may help.

Statistics prove that people who have more birthdays live longer.
(This post was last modified: 03-01-2016 02:54 PM by Crimson Nape.)
03-01-2016 02:53 PM
Find all posts by this user Post Reply Quote this message in a reply

Donate to Apnea Board
Rick_V Offline

Preferred Members

Posts: 51
Joined: Jan 2016

Machine: Resmed Airsense 10 Autoset
Mask Type: Nasal pillows
Mask Make & Model: Airfit P10
Humidifier: Unsure
CPAP Pressure: 5-9
CPAP Software: ResScan SleepyHead

Other Comments: CPAPing since 2006

Sex: Male
Location: Fort White, Fl.

Post: #116
RE: Sleep Master wireless XPAP data transfer
(03-01-2016 02:53 PM)Crimson Nape Wrote:  
(03-01-2016 02:36 PM)Rick_V Wrote:  Trying to get this to work. It is stuck trying to find the card. Also the MAC Address for 192.168.0.112 is not the one that is on the card which BTW has 13 characters.

The MAC address can only be 6 paired digits, 12 characters long total, each pair separated by a colon (':'). The value of each digit can only range from 0-9 and A-F (16 unique digits in all). The MAC address will display like: 11:22:33:44:55:66

I hope this may help.
I know all that but,
On the back of my Flashair card under MAC there are 13 characters.
03-01-2016 02:57 PM
Find all posts by this user Post Reply Quote this message in a reply
Rick_V Offline

Preferred Members

Posts: 51
Joined: Jan 2016

Machine: Resmed Airsense 10 Autoset
Mask Type: Nasal pillows
Mask Make & Model: Airfit P10
Humidifier: Unsure
CPAP Pressure: 5-9
CPAP Software: ResScan SleepyHead

Other Comments: CPAPing since 2006

Sex: Male
Location: Fort White, Fl.

Post: #117
RE: Sleep Master wireless XPAP data transfer
Ok I figured out the mac address problem and binded it but, it is still only searching for the card at 192.168.0.112
03-01-2016 03:10 PM
Find all posts by this user Post Reply Quote this message in a reply

Donate to Apnea Board
Crimson Nape Offline

Monitors

Posts: 1,325
Joined: Oct 2014

Machine: ResMed S9 Autoset
Mask Type: Other
Mask Make & Model: P-10 / F&P Simplus / DreamWear
Humidifier: H5i w/Climateline
CPAP Pressure: 8 - EPR 3
CPAP Software: SleepyHead

Other Comments: CMS-50F & 50IW

Sex: Male
Location: Georgia

Post: #118
RE: Sleep Master wireless XPAP data transfer
Rick_V,
Please list the MAC that you are referring to.

Edit: I evidently answered thae same time you were.

If you issue the command: "IPCONFIG /ALL" at a command prompt, what IP and subnet mask is listed for your computer and the gateway IP?

Statistics prove that people who have more birthdays live longer.
(This post was last modified: 03-01-2016 03:15 PM by Crimson Nape.)
03-01-2016 03:11 PM
Find all posts by this user Post Reply Quote this message in a reply
Rick_V Offline

Preferred Members

Posts: 51
Joined: Jan 2016

Machine: Resmed Airsense 10 Autoset
Mask Type: Nasal pillows
Mask Make & Model: Airfit P10
Humidifier: Unsure
CPAP Pressure: 5-9
CPAP Software: ResScan SleepyHead

Other Comments: CPAPing since 2006

Sex: Male
Location: Fort White, Fl.

Post: #119
RE: Sleep Master wireless XPAP data transfer
EC-21-E5-84-85-01

That is the correct MAC Address I got a magnifying glass out and I somehow was adding a 2nd 1 after the 21.
(This post was last modified: 03-01-2016 03:18 PM by Rick_V.)
03-01-2016 03:14 PM
Find all posts by this user Post Reply Quote this message in a reply

Donate to Apnea Board
Rick_V Offline

Preferred Members

Posts: 51
Joined: Jan 2016

Machine: Resmed Airsense 10 Autoset
Mask Type: Nasal pillows
Mask Make & Model: Airfit P10
Humidifier: Unsure
CPAP Pressure: 5-9
CPAP Software: ResScan SleepyHead

Other Comments: CPAPing since 2006

Sex: Male
Location: Fort White, Fl.

Post: #120
RE: Sleep Master wireless XPAP data transfer
(03-01-2016 03:11 PM)Crimson Nape Wrote:  Rick_V,
Please list the MAC that you are referring to.

Edit: I evidently answered thae same time you were.

If you issue the command: "IPCONFIG /ALL" at a command prompt, what IP and subnet mask is listed for your computer and the gateway IP?

Lan card192.168.0.112
255.255.255.0
Gateway 192.168.0.1
(This post was last modified: 03-01-2016 03:43 PM by Rick_V.)
03-01-2016 03:36 PM
Find all posts by this user Post Reply Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Sleep Master Setup - Error at 1702 IMSleeplessInSeattle 12 641 11-28-2016 11:24 PM
Last Post: Crimson Nape
Idea WiFi SD Card Data-transfer to ResScan & SH for The Rest of Us Papit 57 9,909 10-30-2016 10:59 AM
Last Post: sonicboom
  Sleephead Software and Wireless Uploads RESTMD 3 325 10-16-2016 05:13 PM
Last Post: srlevine1
  Wireless SD card questions natyprueba 2 426 08-05-2016 06:26 AM
Last Post: natyprueba
  FlashAir 3 Wireless Timeout ronsch00 1 403 06-26-2016 06:21 PM
Last Post: DariaVader
  Sleep Master not finding card Pizzafoundry 2 380 06-04-2016 08:31 PM
Last Post: Jack_Russell_Fan
  Software that uses wireless technology instead of SD card FatNeck72 11 1,215 05-16-2016 08:25 AM
Last Post: FatNeck72

Forum Jump:

Who's Online (Complete List)