Post Reply 
Sleep Master wireless XPAP data transfer
Author Message
Rick_V Offline

Preferred Members

Posts: 51
Joined: Jan 2016

Machine: Resmed Airsense 10 Autoset
Mask Type: Nasal pillows
Mask Make & Model: Airfit P10
Humidifier: Unsure
CPAP Pressure: 5-9
CPAP Software: ResScan SleepyHead

Other Comments: CPAPing since 2006

Sex: Male
Location: Fort White, Fl.

Post: #131
RE: Sleep Master wireless XPAP data transfer
(03-03-2016 02:32 PM)AlanE Wrote:  I'm thinking not if you specified the SSID. On "Cave", what security are you using? Flashair I believe only supports WPA2_Personal and the password has to be from 8 to 63 characters.

My encryption is set for AES (only selection available to me under WPA2).


Have you tried the Flashair software?

http://www.toshiba.co.jp/p-media/english/download/wl/software02.htm
February 15, 2016 V3.0.2
This software is good for W-02 and W-03.


The last Flashair firmware update was: August 20, 2015 V3.00.01
http://www.toshiba.co.jp/p-media/english...ol_w03.htm

Neither erased my card data despite their warning that it would, but I made a backup of it just in case. I had to manually edit the CONFIG file after as well.
I used the software earlier today and set it up for internet pass through. I can access the card from my smartphone but, SM still can't see it and it doesn't show up on my network. Tried setting it up as both AP and Station in SM.
03-03-2016 05:44 PM
Find all posts by this user Post Reply Quote this message in a reply

Donate to Apnea Board
Rick_V Offline

Preferred Members

Posts: 51
Joined: Jan 2016

Machine: Resmed Airsense 10 Autoset
Mask Type: Nasal pillows
Mask Make & Model: Airfit P10
Humidifier: Unsure
CPAP Pressure: 5-9
CPAP Software: ResScan SleepyHead

Other Comments: CPAPing since 2006

Sex: Male
Location: Fort White, Fl.

Post: #132
RE: Sleep Master wireless XPAP data transfer
One more question do I need to have a wireless adapter on my PC? After doing some reading it seems that may be my problem. Or is this what the SM java basically does?
(This post was last modified: 03-06-2016 11:57 AM by Rick_V.)
03-06-2016 11:55 AM
Find all posts by this user Post Reply Quote this message in a reply
AlanE Offline

Advisory Members

Posts: 1,491
Joined: Mar 2015

Machine: ResMed AirSense 10 Autoset
Mask Type: Nasal pillows
Mask Make & Model: P10 & Mirage Liberty backup
Humidifier: Built-in
CPAP Pressure: 10-14
CPAP Software: ResScan SleepyHead

Other Comments: ʕ•ᴥ•ʔ So Long, and Thanks for All the Fish

Sex: Male
Location: Southwest Florida

Post: #133
RE: Sleep Master wireless XPAP data transfer
If your flashair is set in station mode (APPMODE=5) then as long as your APPSSID and APPNETWORKKEY are correct (it is case sensitive) your PC just has to be on the same subnet as your wifi.



Using FlashAir W-03 SD card in machine. Access through wifi with FlashPAP or Sleep Master utilities.

I wanted to learn Binary so I enrolled in Binary 101. I seemed to have missed the first four courses. Big Grinnie
03-06-2016 07:22 PM
Find all posts by this user Post Reply Quote this message in a reply

Donate to Apnea Board
kingfishbc Offline

Preferred Members

Posts: 23
Joined: Mar 2016

Machine: Resmed S10 AirSense AutoSet
Mask Type: Nasal pillows
Mask Make & Model: Resmed AirFit P10
Humidifier: Resmed HumidAir S
CPAP Pressure: AutoSet 15-20
CPAP Software: ResScan SleepyHead Other Software

Other Comments: Type 2 diabetes, left anterior fascicular block

Sex: Male
Location: SW Michigan

Post: #134
RE: Sleep Master wireless XPAP data transfer
Windows 10, ResMed S10 AutoSet,Toshiba 16GB W-03 FlashAir card. I think I've gone through all the Sleep Master configurations correctly (station mode), I've followed the little orange road signs exactly and in order of their appearance, and stuck the Toshiba card back into the S10. Then pressed OK, then pressed "load user profile", and Sleep Master is stuck on "Searching for User's FlashAir card...Please Wait!".

I'm attempting to connect to a WiFi extender that uses a similar but different SSID to my router, but with the same password as the router. The laptop I'm using to configure with and my Samsung GS5 smartphone both are connected to the extender I'm trying to use, and they both can see the card, but SM doesn't seem to be able to. So I'm thinking that confirms my setup is correct(?) so far as SSID and password are concerned. Right now the laptop and phone are together and are in an equilateral triangle with the CPAP/card and the extender, about 10 feet on a leg.

Any ideas?

Thanks,
kingfisgbc

BTW, I'm finding that my laptop's and my GS5's ability to see the card on the network is an intermittent thing - comes and goes...

Truth is like poetry...and you know how everyone hates poetry!
(This post was last modified: 03-21-2016 05:28 PM by kingfishbc.)
03-21-2016 05:19 PM
Find all posts by this user Post Reply Quote this message in a reply
DariaVader Offline
Apnea Board Facebook Editor
Monitors

Posts: 1,820
Joined: Nov 2014

Machine: Resmed S9 AutoSet
Mask Type: Nasal pillows
Mask Make & Model: Airfit P10 for Her
Humidifier: H5i humidifier with ClimateLine heated hose
CPAP Pressure: 8-15
CPAP Software: SleepyHead

Other Comments: diabetes II, Thyroidectomized, Primary Immune Deficiency, and the list goes on :P

Sex: Female
Location: Oregon

Post: #135
RE: Sleep Master wireless XPAP data transfer
With the extender, the MAC address of the flashair card will be different than the MAC the card was born with. Perhaps that matters to Sleepmaster utility? (not sure - I use the other one, but I do have a card on an extender for my son's machine) Are you able to tell Sleepmaster an IP?

هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه
Tongue Suck Technique for prevention of mouth breathing:
  • Place your tongue behind your front teeth on the roof of your mouth
  • let your tongue fill the space between the upper molars
  • gently suck to form a light vacuum
Practising during the day can help you to keep it at night

هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه
03-21-2016 05:30 PM
Find all posts by this user Post Reply Quote this message in a reply

Donate to Apnea Board
kingfishbc Offline

Preferred Members

Posts: 23
Joined: Mar 2016

Machine: Resmed S10 AirSense AutoSet
Mask Type: Nasal pillows
Mask Make & Model: Resmed AirFit P10
Humidifier: Resmed HumidAir S
CPAP Pressure: AutoSet 15-20
CPAP Software: ResScan SleepyHead Other Software

Other Comments: Type 2 diabetes, left anterior fascicular block

Sex: Male
Location: SW Michigan

Post: #136
RE: Sleep Master wireless XPAP data transfer
(03-21-2016 05:30 PM)DariaVader Wrote:  With the extender, the MAC address of the flashair card will be different than the MAC the card was born with. Perhaps that matters to Sleepmaster utility? (not sure - I use the other one, but I do have a card on an extender for my son's machine) Are you able to tell Sleepmaster an IP?

Mmm...Answering what I think you are asking me, I think I can start the process over, stick the card back into my laptop, and get it to show me the IP and MAC - I saw those earlier in the middle of a couple of false starts...is that what you mean? Then add those (or one of those) numbers to the configuration while the card is still in the laptop?

Thanks-

Truth is like poetry...and you know how everyone hates poetry!
03-21-2016 05:41 PM
Find all posts by this user Post Reply Quote this message in a reply
DariaVader Offline
Apnea Board Facebook Editor
Monitors

Posts: 1,820
Joined: Nov 2014

Machine: Resmed S9 AutoSet
Mask Type: Nasal pillows
Mask Make & Model: Airfit P10 for Her
Humidifier: H5i humidifier with ClimateLine heated hose
CPAP Pressure: 8-15
CPAP Software: SleepyHead

Other Comments: diabetes II, Thyroidectomized, Primary Immune Deficiency, and the list goes on :P

Sex: Female
Location: Oregon

Post: #137
RE: Sleep Master wireless XPAP data transfer
when the card is connected via wifi to your extender, the extender gives it a different (virtual) MAC. Some of the characters will be inherited from the extender and the end of the address inherited from the actual MAC of the card. What happens then is that the MAC associated with the IP of the card is advertised differently than the actual MAC of the card when it is sitting in the card slot/

هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه
Tongue Suck Technique for prevention of mouth breathing:
  • Place your tongue behind your front teeth on the roof of your mouth
  • let your tongue fill the space between the upper molars
  • gently suck to form a light vacuum
Practising during the day can help you to keep it at night

هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه
03-21-2016 05:47 PM
Find all posts by this user Post Reply Quote this message in a reply

Donate to Apnea Board
kingfishbc Offline

Preferred Members

Posts: 23
Joined: Mar 2016

Machine: Resmed S10 AirSense AutoSet
Mask Type: Nasal pillows
Mask Make & Model: Resmed AirFit P10
Humidifier: Resmed HumidAir S
CPAP Pressure: AutoSet 15-20
CPAP Software: ResScan SleepyHead Other Software

Other Comments: Type 2 diabetes, left anterior fascicular block

Sex: Male
Location: SW Michigan

Post: #138
RE: Sleep Master wireless XPAP data transfer
(03-21-2016 05:47 PM)DariaVader Wrote:  when the card is connected via wifi to your extender, the extender gives it a different (virtual) MAC. Some of the characters will be inherited from the extender and the end of the address inherited from the actual MAC of the card. What happens then is that the MAC associated with the IP of the card is advertised differently than the actual MAC of the card when it is sitting in the card slot/

I think I've got it - the rain in Spain stays mainly...I'm sorry, showing my age...

Well, I'm not sure where to go with that - all I can see from either my phone or from my laptop when the card is in the S10 and is transmitting, is some kind of identifier (flashair_b86b239491e8), and if what we need is a dynamic ip or mac number to configure into the Sleep Master software so it can recognize the card, I'm at a loss...

Truth is like poetry...and you know how everyone hates poetry!
(This post was last modified: 03-21-2016 07:05 PM by kingfishbc.)
03-21-2016 07:04 PM
Find all posts by this user Post Reply Quote this message in a reply
DariaVader Offline
Apnea Board Facebook Editor
Monitors

Posts: 1,820
Joined: Nov 2014

Machine: Resmed S9 AutoSet
Mask Type: Nasal pillows
Mask Make & Model: Airfit P10 for Her
Humidifier: H5i humidifier with ClimateLine heated hose
CPAP Pressure: 8-15
CPAP Software: SleepyHead

Other Comments: diabetes II, Thyroidectomized, Primary Immune Deficiency, and the list goes on :P

Sex: Female
Location: Oregon

Post: #139
RE: Sleep Master wireless XPAP data transfer
have not used sleepmaster. sorry. i run linux and when i initially set mine up sleepmaster did not have a native linux app. He does now, but now I am all configged Smile

Hopefully a sleepmaster user will come along and shed light instead of adding to the murk as I have done Big Grin

Bottom line, is that your setup *should* work, but the extender does add some complexity to the thing

هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه
Tongue Suck Technique for prevention of mouth breathing:
  • Place your tongue behind your front teeth on the roof of your mouth
  • let your tongue fill the space between the upper molars
  • gently suck to form a light vacuum
Practising during the day can help you to keep it at night

هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه
03-21-2016 07:14 PM
Find all posts by this user Post Reply Quote this message in a reply

Donate to Apnea Board
kingfishbc Offline

Preferred Members

Posts: 23
Joined: Mar 2016

Machine: Resmed S10 AirSense AutoSet
Mask Type: Nasal pillows
Mask Make & Model: Resmed AirFit P10
Humidifier: Resmed HumidAir S
CPAP Pressure: AutoSet 15-20
CPAP Software: ResScan SleepyHead Other Software

Other Comments: Type 2 diabetes, left anterior fascicular block

Sex: Male
Location: SW Michigan

Post: #140
RE: Sleep Master wireless XPAP data transfer
Thanks for your efforts DV, nonetheless!

Truth is like poetry...and you know how everyone hates poetry!
03-21-2016 07:19 PM
Find all posts by this user Post Reply Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Sleep Master Setup - Error at 1702 IMSleeplessInSeattle 12 648 11-28-2016 11:24 PM
Last Post: Crimson Nape
Idea WiFi SD Card Data-transfer to ResScan & SH for The Rest of Us Papit 57 9,942 10-30-2016 10:59 AM
Last Post: sonicboom
  Sleephead Software and Wireless Uploads RESTMD 3 330 10-16-2016 05:13 PM
Last Post: srlevine1
  Wireless SD card questions natyprueba 2 426 08-05-2016 06:26 AM
Last Post: natyprueba
  FlashAir 3 Wireless Timeout ronsch00 1 404 06-26-2016 06:21 PM
Last Post: DariaVader
  Sleep Master not finding card Pizzafoundry 2 381 06-04-2016 08:31 PM
Last Post: Jack_Russell_Fan
  Software that uses wireless technology instead of SD card FatNeck72 11 1,219 05-16-2016 08:25 AM
Last Post: FatNeck72

Forum Jump:

Who's Online (Complete List)