Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

Sleep Master wireless XPAP data transfer
RE: Sleep Master wireless XPAP data transfer
Lately, there seems to be some confusion regarding Sleep Master and Flashpap.

Flashpap is a program written by someone else and requires manual configuration of the CONFIG file.

Sleep Master is written by me and does not require manual configuration of the CONFIG file. I do not advise trying to manually configure the CONFIG file on the FlashAir for Sleep Master! I also do not advise trying to use the same FlashAir with both programs at the same time, as only advanced users would be able
to set up the FlashAir for both programs. Sleep Master was designed to eliminate the need to manually configure the FlashAir.

Sleep Master must be installed in the users "documents" folder on the root drive of your computer. Sleep Master will not work if installed on a network drive.

Happy PaPing!

Tom
Admin Note:
Jack_Russell_Fan passed away in June 2020
For his SleepMaster software, click here.

~ Rest in Peace ~
RE: Sleep Master wireless XPAP data transfer
I'm having some trouble getting this going in Arch Linux. I know you specifically state Ubuntu as the one you tested on, but I run Arch so obviously I'm hoping to get it to work on Arch too. Smile

Basically I'm stuck at the setup step where you choose the "drive" where the FlashAir is located. The drop-down is empty and there is an exception in the console where I ran the program from.

Code:
~/D/Sleep_Master_Java pwd
/home/kevin/Documents/Sleep_Master_Java
~/D/Sleep_Master_Java java -version
java version "1.8.0_74"
Java(TM) SE Runtime Environment (build 1.8.0_74-b02)
Java HotSpot(TM) 64-Bit Server VM (build 25.74-b02, mixed mode)
~/D/Sleep_Master_Java java -jar Sleep_Master.jar
Exception in thread "AWT-EventQueue-0" java.lang.NullPointerException
        at my.sleepmaster.SleepMasterUI.jComboBox3FocusGained(SleepMasterUI.java:1873)
        at my.sleepmaster.SleepMasterUI.access$1700(SleepMasterUI.java:69)
        at my.sleepmaster.SleepMasterUI$10.focusGained(SleepMasterUI.java:464)
        at java.awt.AWTEventMulticaster.focusGained(AWTEventMulticaster.java:220)
        at java.awt.Component.processFocusEvent(Component.java:6424)
        at java.awt.Component.processEvent(Component.java:6291)
        at java.awt.Container.processEvent(Container.java:2236)
        at java.awt.Component.dispatchEventImpl(Component.java:4891)
        at java.awt.Container.dispatchEventImpl(Container.java:2294)
        at java.awt.Component.dispatchEvent(Component.java:4713)
        at java.awt.KeyboardFocusManager.redispatchEvent(KeyboardFocusManager.java:1954)
        at java.awt.DefaultKeyboardFocusManager.typeAheadAssertions(DefaultKeyboardFocusManager.java:986)
        at java.awt.DefaultKeyboardFocusManager.dispatchEvent(DefaultKeyboardFocusManager.java:610)
        at java.awt.Component.dispatchEventImpl(Component.java:4762)
        at java.awt.Container.dispatchEventImpl(Container.java:2294)
        at java.awt.Component.dispatchEvent(Component.java:4713)
        at java.awt.EventQueue.dispatchEventImpl(EventQueue.java:758)
        at java.awt.EventQueue.access$500(EventQueue.java:97)
        at java.awt.EventQueue$3.run(EventQueue.java:709)
        at java.awt.EventQueue$3.run(EventQueue.java:703)
        at java.security.AccessController.doPrivileged(Native Method)
        at java.security.ProtectionDomain$JavaSecurityAccessImpl.doIntersectionPrivilege(ProtectionDomain.java:76)
        at java.security.ProtectionDomain$JavaSecurityAccessImpl.doIntersectionPrivilege(ProtectionDomain.java:86)
        at java.awt.EventQueue$4.run(EventQueue.java:731)
        at java.awt.EventQueue$4.run(EventQueue.java:729)
        at java.security.AccessController.doPrivileged(Native Method)
        at java.security.ProtectionDomain$JavaSecurityAccessImpl.doIntersectionPrivilege(ProtectionDomain.java:76)
        at java.awt.EventQueue.dispatchEvent(EventQueue.java:728)
        at java.awt.EventDispatchThread.pumpOneEventForFilters(EventDispatchThread.java:201)
        at java.awt.EventDispatchThread.pumpEventsForFilter(EventDispatchThread.java:116)
        at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:105)
        at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:101)
        at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:93)
        at java.awt.EventDispatchThread.run(EventDispatchThread.java:82)

[attachment=2131]
RE: Sleep Master wireless XPAP data transfer
New version released today;

New in version 5.0.0.20
***** Improved connectivity for Mac and Ubuntu users.
​***** Now compatible with ARCH Linux!

http://www.sleepmaster.org/

Tom
Admin Note:
Jack_Russell_Fan passed away in June 2020
For his SleepMaster software, click here.

~ Rest in Peace ~
RE: Sleep Master wireless XPAP data transfer
Trying to get this to work. It is stuck trying to find the card. Also the MAC Address for 192.168.0.112 is not the one that is on the card which BTW has 13 characters.

[attachment=2216]

I have 3 wireless routers in the house one is the one from the DSL provider, the other 2 are connected to it through wired connections. Also I have a 4th access point with a Directv Genie system. Could it be trying to connect to one of the other routers and that is what is causing the problem.
RE: Sleep Master wireless XPAP data transfer
(03-01-2016, 02:36 PM)Rick_V Wrote: Trying to get this to work. It is stuck trying to find the card. Also the MAC Address for 192.168.0.112 is not the one that is on the card which BTW has 13 characters.

The MAC address can only be 6 paired digits, 12 characters long total, each pair separated by a colon (':'). The value of each digit can only range from 0-9 and A-F (16 unique digits in all). The MAC address will display like: 11:22:33:44:55:66

I hope this may help.
Crimson Nape
Apnea Board Moderator
www.ApneaBoard.com
___________________________________
Useful Links -or- When All Else Fails:
The Guide to Understanding OSCAR
OSCAR Chart Organization
Attaching Images and Files on Apnea Board
Apnea Helpful Tips

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
RE: Sleep Master wireless XPAP data transfer
(03-01-2016, 02:53 PM)Crimson Nape Wrote:
(03-01-2016, 02:36 PM)Rick_V Wrote: Trying to get this to work. It is stuck trying to find the card. Also the MAC Address for 192.168.0.112 is not the one that is on the card which BTW has 13 characters.

The MAC address can only be 6 paired digits, 12 characters long total, each pair separated by a colon (':'). The value of each digit can only range from 0-9 and A-F (16 unique digits in all). The MAC address will display like: 11:22:33:44:55:66

I hope this may help.
I know all that but,
On the back of my Flashair card under MAC there are 13 characters.
RE: Sleep Master wireless XPAP data transfer
Ok I figured out the mac address problem and binded it but, it is still only searching for the card at 192.168.0.112
RE: Sleep Master wireless XPAP data transfer
Rick_V,
Please list the MAC that you are referring to.

Edit: I evidently answered thae same time you were.

If you issue the command: "IPCONFIG /ALL" at a command prompt, what IP and subnet mask is listed for your computer and the gateway IP?
Crimson Nape
Apnea Board Moderator
www.ApneaBoard.com
___________________________________
Useful Links -or- When All Else Fails:
The Guide to Understanding OSCAR
OSCAR Chart Organization
Attaching Images and Files on Apnea Board
Apnea Helpful Tips

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
RE: Sleep Master wireless XPAP data transfer
EC-21-E5-84-85-01

That is the correct MAC Address I got a magnifying glass out and I somehow was adding a 2nd 1 after the 21.
RE: Sleep Master wireless XPAP data transfer
(03-01-2016, 03:11 PM)Crimson Nape Wrote: Rick_V,
Please list the MAC that you are referring to.

Edit: I evidently answered thae same time you were.

If you issue the command: "IPCONFIG /ALL" at a command prompt, what IP and subnet mask is listed for your computer and the gateway IP?

Lan card192.168.0.112
255.255.255.0
Gateway 192.168.0.1


Possibly Related Threads...
Thread Author Replies Views Last Post
Question OK TO IMPORT SLEEP DATA FROM OLD SD CARD INTO OSCAR W/O MESSING UP CURRENT DATA? Plmnb 1 79 Today, 01:07 AM
Last Post: Ibrumley
  Viatom/WellUE data is different than OSCAR displayed data GordK 3 292 02-23-2024, 04:48 PM
Last Post: GordK
  Data structure / data definition of AirSense 11 CD, CMSd50+ or OSCAR?hing obvious, … Perickson 4 1,631 02-18-2024, 01:49 PM
Last Post: Perickson
  How to delete CPAP data in OSCAR before sleep and after waking? Apnealicious 30 4,500 09-29-2023, 07:12 PM
Last Post: Crimson Nape
  Changed data directory from OneDrive, Now can't read data Rich66 9 1,028 08-24-2023, 11:32 PM
Last Post: Rich66
Question How do I transfer my data to OSCAR? hejohoo 1 771 08-05-2023, 08:58 PM
Last Post: Sleepster
  Sleep HQ now can import Apple Watch sleep data JCW888 2 1,830 06-02-2023, 12:14 PM
Last Post: Dog Slobber


New Posts   Today's Posts


About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.