Thread Closed 
SleepyHead data gap
Author Message
JumpStart Offline

Preferred Members-2

Posts: 297
Joined: Feb 2012

Machine: ResMed S9 Autoset
Mask Type: Full face mask
Mask Make & Model:
Humidifier: ResMed H5i
CPAP Pressure: 10 - 20 (auto range)
CPAP Software: ResScan SleepyHead

Other Comments: ResMed Mirage Quattro

Sex: Male
Location: Houston, Texas

Post: #1
SleepyHead data gap
Quote:
ADMIN NOTE:
This thread is now closed. If you have a question regarding the SleepyHead software package, please go HERE.

To download the SleepyHead software, go here:
http://www.SleepFiles.com/SH/




SleepyHead last night pulled a new one on me. It showed two separate periods, one of 10 minutes and the other of 8 minutes, with no data, as though I had either turned off the machine or removed the hose several times during the night. However, those events didn't happen, and my memory was confirmed first by ResScan, which showed only one "mask event" for the entire night. I could also tell there were no breaks during the night by the urgency of my desire to visit the bathroom when I awoke! I checked the Session Information, as I always do since the DST issue arose, and it was accurate except for the unexplained gaps. As far as I have noticed, this is a first. Anyone else had this issue?

Breathing keeps you alive. And PAP helps keep you breathing!
04-23-2012 09:46 AM
Find all posts by this user

Donate to Apnea Board
greatunclebill Offline

Members-b

Posts: 549
Joined: Feb 2012

Machine: Respironics System one Auto A-Flex
Mask Type: Full face mask
Mask Make & Model:
Humidifier: System one
CPAP Pressure: 8-12
CPAP Software: SleepyHead EncoreViewer

Other Comments: quattro fx full face

Sex: Male
Location: L.A. (Lower Alabama)

Post: #2
RE: SleepyHead data gap
(04-23-2012 09:46 AM)JumpStart Wrote:  SleepyHead last night pulled a new one on me. It showed two separate periods, one of 10 minutes and the other of 8 minutes, with no data, as though I had either turned off the machine or removed the hose several times during the night. However, those events didn't happen, and my memory was confirmed first by ResScan, which showed only one "mask event" for the entire night. I could also tell there were no breaks during the night by the urgency of my desire to visit the bathroom when I awoke! I checked the Session Information, as I always do since the DST issue arose, and it was accurate except for the unexplained gaps. As far as I have noticed, this is a first. Anyone else had this issue?

then, it's clearly a sleepyhead problem and probably just a one time blip in the beta program. i would set up a new user and download again to see what you get a second time. if its better, go back to the original and purge today's date and start again. if it's the same i wouldn't worry about it.
04-23-2012 09:55 AM
Find all posts by this user
cbramsey Online

Advisory Members

Posts: 900
Joined: Mar 2012

Machine: ResMed S9 Autoset
Mask Type: Nasal mask
Mask Make & Model: ResMed Mirage FX
Humidifier: ResMed H5i with ClimateLine
CPAP Pressure: 6 - 12
CPAP Software: ResScan

Other Comments: Supreme Overlord of Web Darkness

Sex: Male
Location: NC, USA

Post: #3
RE: SleepyHead data gap
Which version of SH are you using? Operating system, etc.

The more information like you provide can provide Jedimark the ability to narrow things down if it happens to be in his current build.

Thinking-about I have never seen anything like this in my Version 0.9.2-2 MacOS version.

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
04-23-2012 10:13 AM
Find all posts by this user

Donate to Apnea Board
JumpStart Offline

Preferred Members-2

Posts: 297
Joined: Feb 2012

Machine: ResMed S9 Autoset
Mask Type: Full face mask
Mask Make & Model:
Humidifier: ResMed H5i
CPAP Pressure: 10 - 20 (auto range)
CPAP Software: ResScan SleepyHead

Other Comments: ResMed Mirage Quattro

Sex: Male
Location: Houston, Texas

Post: #4
RE: SleepyHead data gap
Tried the purge function (several times) as suggested, but SleepyHead failed to purge the selected day's data. Didn't purge any data, for that matter, although I tried several times. Opened and closed main program several times to confirm. I then removed the data for today located in its database [c:\(user)\my documents\sleepyheaddata\profiles\(my profile)\ResMed_*\(14 files dated today)], opened SleepyHead and confirmed nothing was reflected for today in any of its menus, closed and opened SleepyHead several times, and re-imported. Same data gaps as before.

I use Win7x64, SleepyHead 0.9.2-1. Other than the doubling issues created by DST, I have had no other problems.

Breathing keeps you alive. And PAP helps keep you breathing!
04-23-2012 10:49 AM
Find all posts by this user
Rritch Offline

Preferred Members-2

Posts: 107
Joined: Feb 2012

Machine: Respironics System One Pro (450)
Mask Type: Nasal mask
Mask Make & Model:
Humidifier: Respironics System One
CPAP Pressure: 10
CPAP Software: SleepyHead

Other Comments:

Sex: Male
Location: NoVA USA

Post: #5
RE: SleepyHead data gap
It is possible that there is an anomoly in the data That Resmed can account for that Sleepyhead does not. I would keep an eye on it and see if it continues. If it does you may want to format the SD card just in case there is an issue going on with the card. I have had things like that occur with my SD cards for my camera and a format usually sorts it out.
04-23-2012 10:59 AM
Find all posts by this user

Donate to Apnea Board
JumpStart Offline

Preferred Members-2

Posts: 297
Joined: Feb 2012

Machine: ResMed S9 Autoset
Mask Type: Full face mask
Mask Make & Model:
Humidifier: ResMed H5i
CPAP Pressure: 10 - 20 (auto range)
CPAP Software: ResScan SleepyHead

Other Comments: ResMed Mirage Quattro

Sex: Male
Location: Houston, Texas

Post: #6
RE: SleepyHead data gap
(04-23-2012 10:59 AM)Rritch Wrote:  It is possible that there is an anomoly in the data That Resmed can account for that Sleepyhead does not. I would keep an eye on it and see if it continues. If it does you may want to format the SD card just in case there is an issue going on with the card. I have had things like that occur with my SD cards for my camera and a format usually sorts it out.

A good suggestion. As I normally format ever 3-4 days anyway, I went ahead this morning and did so and will see if this re-occurs tomorrow. However, since this is the first time in over 45 days of usage of SleepyHead for this to occur, something different certainly did happen. And the fact that ResScan may have corrected the anomaly is also possible. But who knows?

Breathing keeps you alive. And PAP helps keep you breathing!
04-23-2012 11:15 AM
Find all posts by this user
Grevys Offline

New Members

Posts: 1
Joined: Nov 2012

Machine: ResMed Elite
Mask Type: Nasal pillows
Mask Make & Model: F & P Pilairo
Humidifier: ResMed H5i
CPAP Pressure: 7
CPAP Software: SleepyHead

Other Comments:

Sex: Male
Location: Delta, BC

Post: #7
RE: SleepyHead data gap
(04-23-2012 09:46 AM)JumpStart Wrote:  SleepyHead last night pulled a new one on me. It showed two separate periods, one of 10 minutes and the other of 8 minutes, with no data, as though I had either turned off the machine or removed the hose several times during the night. However, those events didn't happen, and my memory was confirmed first by ResScan, which showed only one "mask event" for the entire night. I could also tell there were no breaks during the night by the urgency of my desire to visit the bathroom when I awoke! I checked the Session Information, as I always do since the DST issue arose, and it was accurate except for the unexplained gaps. As far as I have noticed, this is a first. Anyone else had this issue?

Same here, had a 20 minute gap for the first time in almost two months.
11-08-2012 03:45 PM
Find all posts by this user

Donate to Apnea Board
britincanada Offline

Preferred Members-2

Posts: 81
Joined: Aug 2012

Machine: Respironics BiBpapautoSV Advanced
Mask Type: Full face mask
Mask Make & Model:
Humidifier: unsure
CPAP Pressure: unsure
CPAP Software: Not using software

Other Comments:

Sex: Male
Location: Canada

Post: #8
RE: SleepyHead data gap
used last night between 07/11/2012 20:39 03:02 and all data there on my 0.921 sleepyhead
11-08-2012 04:18 PM
Find all posts by this user
Thread Closed 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  SleepyHead disappearing data?? Lanco 25 790 11-14-2016 03:28 PM
Last Post: Sleeprider
  Sleepyhead data taly 2 207 11-12-2016 08:37 PM
Last Post: Sleeprider
  help reading SleepyHead data charts JaneAM 2 388 09-26-2016 10:27 AM
Last Post: Crimson Nape
  5 Month Check-in - SleepyHead Data MeDee 10 590 09-12-2016 08:49 PM
Last Post: Sleeprider
  Sleepyhead data vs. Doctor's data Daisylouu 8 1,373 09-01-2016 06:10 PM
Last Post: eseedhouse
  Sleepyhead Data PatCurt 5 341 09-01-2016 04:05 PM
Last Post: chill
  Take a look at my SleepyHead data? RandMan 16 967 08-24-2016 01:49 AM
Last Post: DeepBreathing

Forum Jump:

Who's Online (Complete List)