Thread Closed 
SleepyHead help
Author Message
Regular Joe Offline

Preferred Members-2

Posts: 94
Joined: Dec 2012

Machine: ResMed S9 Auto
Mask Type: Full face mask
Mask Make & Model: ResMed AirFit F10
Humidifier: ResMed H5i
CPAP Pressure: 10
CPAP Software: SleepyHead

Other Comments: Medical Technologist

Sex: Male
Location: West Georgia

Post: #21
RE: SleepyHead help
(02-23-2013 08:57 PM)aehjr Wrote:  
(02-17-2013 12:24 AM)Regular Joe Wrote:  Finally installed SH on my laptop. When I open SleepyHead, it says there is a shiny new version 0.9.2-1 available. When I upgrade, I get an error. Something went wrong with unzipping. Ok, what am I doing wrong?

I'm having the same problem and Firefox doesn't give me the option to "run in administrator mode." I haven't been able to find the executable file named 09.2. Could someone post the link to 0.9.2 where I can get it directly?
Thanks!

Here's what I did. This was in windows 7. Find your program files on your hard dirve using explorer. Find the folder called SleepyHead. Click on this folder and find the file called sleepyhead.exe. Right click on this file and select "Run as administrator". When it opens, check for updates. Good luck!
02-24-2013 12:34 AM
Find all posts by this user

Donate to Apnea Board
PaulaO2 Offline
Wiki Editor
Moderators

Posts: 8,067
Joined: Feb 2012

Machine: S9 Autoset
Mask Type: Full face mask
Mask Make & Model: F&P Simplus
Humidifier: H5i
CPAP Pressure: 14-20
CPAP Software: SleepyHead

Other Comments: Ehlers-Danlos Syndrome, Hypermobility Type; chronic sarcasm

Sex: Undisclosed
Location: western NC, USA

Post: #22
RE: SleepyHead help
(02-22-2013 12:24 PM)bphrom Wrote:  I have ResMed elite S9 machine using Resscan software works fine but
like to try Sleepyhead software. I downloaded the latest version. Run and install in administrator mode.
All data were imported. The problem was that I didn't get a graph at all except summary and Pie chart on the right of the screen. I also go to reference option check mark on all graph options. Nothing help.
Any expert out there can help me? What I did wrong?
My comp. use Window 7 64 bits.

Try closing SleepyHead then reopening it. If you are seeing the graphs in ResScan, it should be there for SH as well.

At the top are tabs. Summary is the first page, then there's Daily. That's the one with the graphs. Overview shows, well, the overview so far.

PaulaO2
Apnea Board Moderator
www.ApneaBoard.com


Breathe deeply and count to zen.

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
02-24-2013 01:38 AM
Find all posts by this user
PaulaO2 Offline
Wiki Editor
Moderators

Posts: 8,067
Joined: Feb 2012

Machine: S9 Autoset
Mask Type: Full face mask
Mask Make & Model: F&P Simplus
Humidifier: H5i
CPAP Pressure: 14-20
CPAP Software: SleepyHead

Other Comments: Ehlers-Danlos Syndrome, Hypermobility Type; chronic sarcasm

Sex: Undisclosed
Location: western NC, USA

Post: #23
RE: SleepyHead help
(02-23-2013 08:57 PM)aehjr Wrote:  I'm having the same problem and Firefox doesn't give me the option to "run in administrator mode." I haven't been able to find the executable file named 09.2. Could someone post the link to 0.9.2 where I can get it directly?
Thanks!

Firefox has nothing to do with it except to download it. Joe gave the right directions.

Since you have the Autoset, you don't need the patch, just the update.

PaulaO2
Apnea Board Moderator
www.ApneaBoard.com


Breathe deeply and count to zen.

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
02-24-2013 01:44 AM
Find all posts by this user

Donate to Apnea Board
Shastzi Offline

Advisory Members

Posts: 1,174
Joined: Dec 2012

Machine: ResMed S9 Autoset
Mask Type: Full face mask
Mask Make & Model: FitLife Total face mask
Humidifier: F&P HC150 with Hybernite heated hose.
CPAP Pressure: 15cm-20cm H2O (auto)
CPAP Software: SleepyHead Other Software

Other Comments: CMS50-F wearable Oximeter; Software: SPO2 Assistant

Sex: Undisclosed
Location: Florida, USA.

Post: #24
RE: SleepyHead help
Running SH V.0.9.2-1 on Kubuntu Linux 12.04
I got 3 days of date collected so far from the ResMed S9.

My initial impression is better than average to very good!

No hiccups, glitches or other FUBAR's.

It just runs.

Min press: 11cm
Max press: 16cm

AHI: 2.21
HI: 1.56
OA: 0.26
CA: 0.26
(unknown) apnea: 0.13

Zeo Z-score: 63

No oximetry desaturations below 89%

I give it my official "Incredibly Not Bad" rating for first 3 days of use.

Not to be off topic, but to illustrate that SleepyHead purrs like a kitten with Linux.

Cheers!

Sleep-well

"With ordinary talent and extraordinary perseverance, all things are attainable." - Thomas Foxwell Buxton

Cool
02-24-2013 09:34 AM
Find all posts by this user
Sleepster Offline
Wiki Editor
Moderators

Posts: 4,995
Joined: Feb 2012

Machine: ResMed AirCurve10 VAuto
Mask Type: Full face mask
Mask Make & Model: F&P Simplus
Humidifier: HumidAir and SlimLine Hose
CPAP Pressure: MaxI 13.6 | MinE 5.2 | PS 4.4
CPAP Software: ResScan SleepyHead

Other Comments: Diagnosed Nov 2011. Conquered aerophagia.

Sex: Male
Location: Houston, Texas

Post: #25
RE: SleepyHead help
What are your average pressure and 95% pressure?

Sleepster
Apnea Board Moderator
www.ApneaBoard.com


INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
02-24-2013 10:57 AM
Find all posts by this user

Donate to Apnea Board
aehjr Offline

Preferred Members-2

Posts: 92
Joined: Dec 2012

Machine: ResMed S9 AutoSet
Mask Type: Nasal mask
Mask Make & Model: Mirage FX
Humidifier: ResMed S9 H5i
CPAP Pressure: 6 - 12
CPAP Software: ResScan SleepyHead

Other Comments:

Sex: Male
Location: Colorado

Post: #26
RE: SleepyHead help
(02-24-2013 12:34 AM)Regular Joe Wrote:  Here's what I did. This was in windows 7. Find your program files on your hard dirve using explorer. Find the folder called SleepyHead. Click on this folder and find the file called sleepyhead.exe. Right click on this file and select "Run as administrator". When it opens, check for updates. Good luck!
Joe/ Paula - Thanks very much. Worked like champ.
02-24-2013 01:56 PM
Find all posts by this user
Shastzi Offline

Advisory Members

Posts: 1,174
Joined: Dec 2012

Machine: ResMed S9 Autoset
Mask Type: Full face mask
Mask Make & Model: FitLife Total face mask
Humidifier: F&P HC150 with Hybernite heated hose.
CPAP Pressure: 15cm-20cm H2O (auto)
CPAP Software: SleepyHead Other Software

Other Comments: CMS50-F wearable Oximeter; Software: SPO2 Assistant

Sex: Undisclosed
Location: Florida, USA.

Post: #27
RE: SleepyHead help
(02-24-2013 10:57 AM)Sleepster Wrote:  What are your average pressure and 95% pressure?

Mean = 13.69
95% = 15.74

"With ordinary talent and extraordinary perseverance, all things are attainable." - Thomas Foxwell Buxton

Cool
(This post was last modified: 02-24-2013 02:04 PM by Shastzi.)
02-24-2013 02:03 PM
Find all posts by this user

Donate to Apnea Board
Thread Closed 


Forum Jump:

Who's Online (Complete List)