Thread Closed 
Sleepyhead Erasing SD Card
Author Message
BiBob Offline

Preferred Members

Posts: 36
Joined: May 2014

Machine: ResMed s9 VAuto
Mask Type: Full face mask
Mask Make & Model: ResMed Quattro FX
Humidifier: H5i
CPAP Pressure: 18/12
CPAP Software: ResScan SleepyHead

Other Comments:

Sex: Male
Location: Port Townsend, WA US

Post: #11
RE: Sleepyhead Erasing SD Card
When I open SH and go thru the "Welcome to SH" header, input profile data and click on Finish I get the following:


----- The disk cannot be written to because it is write protected. PLease remove the write protection from the volume in drive G:.

Drive G: is the card reader and the sd card in the reader is the one from the s9. The choices are cancel, try again, or continue.

When I unlock the sd card and check try again, the "OK, get on with it" Release notes is displayed.
I then click on that and it brings up the page that I use to input preferences. With that done, I click on file and import data. it then asks me to select a folder at which time I select G: and then click on "Select Folder". While I have used this s9 machine since
29 Apr 2014, it only shows one day as all the rest of the time has been deleted as when I put the card back in the s9, it has me delete the data before it will allow me to continue.
When I insert the sd card back into the s9 it reads---Data re=writing to sd card - press yes to continue. If I say no it tells me to remove the card. If I choose yes it says--Erasing sd card data.

It's obvious that the compute is writing something on the card. And/or I'm doing something wrong.

Sorry for the long attempt to explain. Any help is appreciated.
Bob
05-21-2014 06:03 PM
Find all posts by this user

Donate to Apnea Board
Bama Rambler Offline

Preferred Members-2

Posts: 213
Joined: Feb 2014

Machine: Respironics System One DS460TS
Mask Type: Full face mask
Mask Make & Model: F&P Simplus
Humidifier: DS6T
CPAP Pressure: 15 cmH2O
CPAP Software: SleepyHead EncoreBasic

Other Comments: xPAP, Best thing since sliced bread!

Sex: Male
Location: Southwest Alabama

Post: #12
RE: Sleepyhead Erasing SD Card
What happens if you select Continue on the locked card?
05-21-2014 06:37 PM
Find all posts by this user
retired_guy Offline

Preferred Members-2

Posts: 2,744
Joined: Jan 2014

Machine: ResMed S9 Autoset
Mask Type: Nasal pillows
Mask Make & Model: Resmed Airfit P10
Humidifier: ResMed
CPAP Pressure: 10.6/14, EPR 3
CPAP Software: ResScan SleepyHead

Other Comments: Is it bedtime yet?

Sex: Male
Location: Beautiful, albeit very wet Oregon Coast

Post: #13
RE: Sleepyhead Erasing SD Card
(05-21-2014 06:03 PM)BiBob Wrote:  When I open SH and go thru the "Welcome to SH" header, input profile data and click on Finish I get the following:


----- The disk cannot be written to because it is write protected. PLease remove the write protection from the volume in drive G:.

Drive G: is the card reader and the sd card in the reader is the one from the s9. The choices are cancel, try again, or continue.

When I unlock the sd card and check try again, the "OK, get on with it" Release notes is displayed.
I then click on that and it brings up the page that I use to input preferences. With that done, I click on file and import data. it then asks me to select a folder at which time I select G: and then click on "Select Folder". While I have used this s9 machine since
29 Apr 2014, it only shows one day as all the rest of the time has been deleted as when I put the card back in the s9, it has me delete the data before it will allow me to continue.
When I insert the sd card back into the s9 it reads---Data re=writing to sd card - press yes to continue. If I say no it tells me to remove the card. If I choose yes it says--Erasing sd card data.

It's obvious that the compute is writing something on the card. And/or I'm doing something wrong.

Sorry for the long attempt to explain. Any help is appreciated.
Bob

Actually the computer is doing exactly what it is being told to do, and that is to write all over your sdcard, which is "drive g:"

Try this: Right click on the desktop shortcut. Click on "Properties."
What is in the "Start in" field? If it's G: something, that's the problem. It should be "C:\Program Files (x86)\SleepyHead" This is a pointer to where the Sleepyhead program is expecting to find it's data.
(This post was last modified: 05-21-2014 06:51 PM by retired_guy.)
05-21-2014 06:51 PM
Find all posts by this user

Donate to Apnea Board
BiBob Offline

Preferred Members

Posts: 36
Joined: May 2014

Machine: ResMed s9 VAuto
Mask Type: Full face mask
Mask Make & Model: ResMed Quattro FX
Humidifier: H5i
CPAP Pressure: 18/12
CPAP Software: ResScan SleepyHead

Other Comments:

Sex: Male
Location: Port Townsend, WA US

Post: #14
RE: Sleepyhead Erasing SD Card
Bama,

I'm at a loss. The only difference between the systems we're using is my s9.

I have to unlock my sd card when on my computer. Do you?
05-21-2014 07:05 PM
Find all posts by this user
retired_guy Offline

Preferred Members-2

Posts: 2,744
Joined: Jan 2014

Machine: ResMed S9 Autoset
Mask Type: Nasal pillows
Mask Make & Model: Resmed Airfit P10
Humidifier: ResMed
CPAP Pressure: 10.6/14, EPR 3
CPAP Software: ResScan SleepyHead

Other Comments: Is it bedtime yet?

Sex: Male
Location: Beautiful, albeit very wet Oregon Coast

Post: #15
RE: Sleepyhead Erasing SD Card
(05-21-2014 06:51 PM)retired_guy Wrote:  Actually the computer is doing exactly what it is being told to do, and that is to write all over your sdcard, which is "drive g:"

Try this: Right click on the desktop shortcut. Click on "Properties."
What is in the "Start in" field? If it's G: something, that's the problem. It should be "C:\Program Files (x86)\SleepyHead" This is a pointer to where the Sleepyhead program is expecting to find it's data.

(05-21-2014 07:05 PM)BiBob Wrote:  Bama,

I'm at a loss. The only difference between the systems we're using is my s9.

I have to unlock my sd card when on my computer. Do you?

Yoo Hoo, Bibob.......... You still with us?
05-21-2014 07:15 PM
Find all posts by this user

Donate to Apnea Board
BiBob Offline

Preferred Members

Posts: 36
Joined: May 2014

Machine: ResMed s9 VAuto
Mask Type: Full face mask
Mask Make & Model: ResMed Quattro FX
Humidifier: H5i
CPAP Pressure: 18/12
CPAP Software: ResScan SleepyHead

Other Comments:

Sex: Male
Location: Port Townsend, WA US

Post: #16
RE: Sleepyhead Erasing SD Card
Yep I'm still here. I'm still trying to figure out the reason why SH would look in C:______ for data when the new data is on the SD card.
But when I checked properties the starting location is C:_____(86) SH
(This post was last modified: 05-21-2014 07:24 PM by BiBob.)
05-21-2014 07:22 PM
Find all posts by this user
retired_guy Offline

Preferred Members-2

Posts: 2,744
Joined: Jan 2014

Machine: ResMed S9 Autoset
Mask Type: Nasal pillows
Mask Make & Model: Resmed Airfit P10
Humidifier: ResMed
CPAP Pressure: 10.6/14, EPR 3
CPAP Software: ResScan SleepyHead

Other Comments: Is it bedtime yet?

Sex: Male
Location: Beautiful, albeit very wet Oregon Coast

Post: #17
RE: Sleepyhead Erasing SD Card
(05-21-2014 07:22 PM)BiBob Wrote:  Yep I'm still here. I'm still trying to figure out the reason why SH would look in C:______ for data when the new data is on the SD card.
But when I checked properties the starting location is C:_____(86) SH

Because the properties field tells it where to keep the profile and daily data. The sdcard only has data on it from the Resmed. To get the data from the sdcard into the sleephead system you "Import" it.

But the first thing is to get the path correct. If it is saying "C:____(86) SH", that is incorrect. You need it to point to the directory where the Sleepyhead system resides. So change it.
05-21-2014 07:33 PM
Find all posts by this user

Donate to Apnea Board
BiBob Offline

Preferred Members

Posts: 36
Joined: May 2014

Machine: ResMed s9 VAuto
Mask Type: Full face mask
Mask Make & Model: ResMed Quattro FX
Humidifier: H5i
CPAP Pressure: 18/12
CPAP Software: ResScan SleepyHead

Other Comments:

Sex: Male
Location: Port Townsend, WA US

Post: #18
RE: Sleepyhead Erasing SD Card
OK. I think it's working (maybe) but there's no data on the card so it will take me tonight to generate some new data. At least i can put card in computer with card locked and it goes ahead now. So, let's see what tomorrow brings.

Sorry for all the confusion and thanks so much for helping me.
Bob
05-21-2014 07:38 PM
Find all posts by this user
BiBob Offline

Preferred Members

Posts: 36
Joined: May 2014

Machine: ResMed s9 VAuto
Mask Type: Full face mask
Mask Make & Model: ResMed Quattro FX
Humidifier: H5i
CPAP Pressure: 18/12
CPAP Software: ResScan SleepyHead

Other Comments:

Sex: Male
Location: Port Townsend, WA US

Post: #19
RE: Sleepyhead Erasing SD Card
PS I was just abbreviating the location. Under properties the Start in Location is "C:\Program Files(86)\SleepyHead"

Again - Thanks,
Bob
05-21-2014 07:41 PM
Find all posts by this user

Donate to Apnea Board
retired_guy Offline

Preferred Members-2

Posts: 2,744
Joined: Jan 2014

Machine: ResMed S9 Autoset
Mask Type: Nasal pillows
Mask Make & Model: Resmed Airfit P10
Humidifier: ResMed
CPAP Pressure: 10.6/14, EPR 3
CPAP Software: ResScan SleepyHead

Other Comments: Is it bedtime yet?

Sex: Male
Location: Beautiful, albeit very wet Oregon Coast

Post: #20
RE: Sleepyhead Erasing SD Card
(05-21-2014 07:38 PM)BiBob Wrote:  OK. I think it's working (maybe) but there's no data on the card so it will take me tonight to generate some new data. At least i can put card in computer with card locked and it goes ahead now. So, let's see what tomorrow brings.

Sorry for all the confusion and thanks so much for helping me.
Bob

That's fine Bob. Glad to help.

You should now be able to create a profile even without the sdcard being in the computer and have it store it correctly. Then tomorrow you will select your profile name, which will open it up, and give you the option to "import" some data from the sdcard.
05-21-2014 07:41 PM
Find all posts by this user
Thread Closed 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  card reader and sleepyhead nobody102 3 212 09-29-2016 03:40 PM
Last Post: nobody102
  SD Card "Bricks" on Sleepyhead Tipperaryeddie 4 386 08-13-2016 12:53 PM
Last Post: OpalRose
  Sleepyhead sd card festo 7 444 04-10-2016 08:44 AM
Last Post: festo
  Sleepyhead imports from card instead of specified floder if a card is present DariaVader 5 652 03-18-2016 05:40 PM
Last Post: DariaVader
  Cannot get info from SD card in SleepyHead John Naida 0 499 02-10-2016 09:17 AM
Last Post: John Naida
  S-9 card with Sleepyhead Ernie47 2 438 02-02-2016 06:02 PM
Last Post: SuperSleeper
  Is there anyway to push sleepyhead data to SD Card? napnaptime 7 1,082 12-10-2015 12:13 PM
Last Post: napnaptime

Forum Jump:

Who's Online (Complete List)