Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

Sleepyhead and Aircurve 10 Auto VPAP question
#1
User kaisgram posted this screenshot in another thread:

[Image: Screenshot2014-04-09at123934PM_zps8050e1b4.png]

I currently use an Aircurve10 Auto VPAP, however, the pressure graph in Sleepyhead only contains the EPAP pressure line and not the IPAP one. Is there a method to get the IPAP line to show as well?

Thanks!
Post Reply Post Reply
#2
I recall reading that SleepyHead hasn't quite caught up with the AirCurve machines yet and the absence of one of the pressure lines is one of the bugs. I thought it was the EPAP line that was missing, though, not the IPAP. In any case, I guess the "method" is to watch and wait for SleepyHead updates.Wink
Post Reply Post Reply
#3
(10-02-2015, 08:08 PM)kaiasgram Wrote: I recall reading that SleepyHead hasn't quite caught up with the AirCurve machines yet and the absence of one of the pressure lines is one of the bugs. I thought it was the EPAP line that was missing, though, not the IPAP. In any case, I guess the "method" is to watch and wait for SleepyHead updates.Wink

Sorry, you're right, it should be the EPAP that's missing. Bah.

Thanks for your help. To be honest, it's not that difficult to figure out what the EPAP line would be since it's fixed. I just thought it looks nicer with a blue and red line like the one you have in the picture.
Post Reply Post Reply


#4
Hi ramblingasian,

Since you have a RedMed machine you can also download and use ResScan software as a double check on SleepyHead. In ResScan it is the "High Rate Pressure" waveform which shows fine detail of the pressure waveform.

Take care,
--- Vaughn


Membership in the Advisory Member group should not be understood as in any way implying medical expertise or qualification for advising Sleep Apnea patients concerning their treatment. The Advisory Member group provides advice and suggestions to Apnea Board administrators and staff on matters concerning Apnea Board operation and administrative policies - not on matters concerning treatment for Sleep Apnea. I think it is now too late to change the name of the group but I think Voting Member group would perhaps have been a more descriptive name for the group.
Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Questions on Oximetry-Capable Auto-PAP Machines (and SleepyHead) VisitorX 5 161 Today, 03:23 AM
Last Post: VisitorX
  Sleepyhead Question RustySocket 2 174 09-18-2017, 09:06 PM
Last Post: RustySocket
  Sleepyhead question car54 5 1,678 08-14-2017, 08:52 PM
Last Post: woozie38
  Sleepyhead and Philips Respironics REMstar Auto A-Flex Hilobarbie 9 2,703 07-03-2017, 06:45 PM
Last Post: SuperSleeper
  Has anyone used a FlashAir card in a Resmed Aircurve 10 Asv notsleep 15 2,595 04-02-2017, 09:07 PM
Last Post: Jack_Russell_Fan
  Sleepyhead Setup Question stanleydean 2 292 03-30-2017, 05:20 PM
Last Post: stanleydean
  ResMed AirCurve 10 ASV storywizard 2 362 12-30-2016, 07:54 PM
Last Post: storywizard

Forum Jump:

New Posts   Today's Posts




About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.

For any more information, please use our contact form.