Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

Sleepyhead showing summary only
#1
Sleepyhead showing summary only
Sleepyhead has stopped showing all data/graphs,etc and instead is showing the "summary only : (".  

I tried a new SD card, and made sure I waited for the proper messages on the Cpap machine, and this didn't help. I checked the files on the old and new SD card, and it does appear to show the same sorts of file per date on the "summary only" days as on the fully functioning days.  I am sure the card was fully engaged in the CPAP (ResMed 10 Airsense for Her). Since my computer shows the files in the E drive, I assume the card reader is ok (?).  I am even assuming the CPAP machine is OK, since it does seem to generate files which by name, at least, look correct.  And SleepyHead is doing something, since it does seem to show a summary which corrresponds to the correct sleep times, although the AHI does seem to be  somewhat sketch.  I also did not pull the SD cards out of the Cpap before it had written the data.  I have plugged and unplugged the Cpap machine from the power source.  I did some 'program compatability check' with Windows 10 and SleepyHead, to no avail, though I may have done it improperly.

I think there may be a connection between a windows 10 update and this fail, but I can't swear to the timing.

So, maybe my assumptions are all wrong, or the Cpap has failed, or computer...I would be extremely grateful for any help you may offer, as I am really relying on SleepyHead just now to troubleshoot some mask issues, etc that I am having.

And 1*10^6 thanks to all of you for sharing your knowledge in general. It has been a huge help.
Post Reply Post Reply






Donate to Apnea Board  
#2
RE: Sleepyhead showing summary only
Check the Sleepyhead menu under Events and Wavform tabs. Be sure all events and waveforms you want to view are checked. If everything looks okay there, go to Data/Rebuild CPAP Data and see if that fixed the problem.
Sleeprider
Apnea Board Moderator
www.ApneaBoard.com

____________________________________________
Download OSCAR Software
Soft Cervical Collar
Optimizing Therapy
Organize your OSCAR Charts
Attaching Files
Mask Primer
How To Deal With Equipment Supplier


INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#3
RE: Sleepyhead showing summary only
Hi orava,
WELCOME! to the forum.!
Good luck with CPAP therapy.
trish6hundred
Post Reply Post Reply
#4
RE: Sleepyhead showing summary only
Thanks much. Events and waveforms seem fine; I had already tried rebuilding the data, but did it again, to no avail.
Post Reply Post Reply






Donate to Apnea Board  
#5
RE: Sleepyhead showing summary only
Well, I found the solution.  

Credit to Joe Fox, on another forum:  (can't include link as new member, though)

Ok, I think I got it figured out. There are two .exe files in the SleepyHead program folder of C:\Program Files (x86). The shortcut installed by the Sleepyhead install, calls C:\Program files(x86)\SleepyHead\SleepyHead.exe and runs. But my version is now failing to display my graphs correctly. As TBMx pointed out, the broken-GL version of SleepyHead.exe will work-a-round this problem. I don't know what the real fix is but my Norton anti-virus protection program won't let me download and install a fresh copy of Open-GL; but running the C:\Program Files (x86)\SleepyHead\SleepyHead-BrokenGL.exe works. If you have this problem, you can right-click on the desktop SleepyHead Icon shortcut, then, choose properties, then add "-BrokenGL" to the link shown in the shortcut (or delete and enter the full path "C:\Program Files (x86)\SleepyHead\SleepyHead-BrokenGL.exe", to load and run SleepyHead.   


This also fixed another problem I was seeing. As I would scroll down the graph page, the displayed graphs would black out, then reappear as the page scrolled. A problem another poster had an issue with too. This may very well fix his problem too. Joe

This worked for me.  I hope it helps someone else. I will say the fidelity of the graphs isn't great, but...
Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  OSCAR - No data summary only neils 7 184 03-14-2021, 08:04 PM
Last Post: neils
  Oscar Error there is no data to graph summary data only u4ea 2 201 02-05-2021, 10:02 PM
Last Post: u4ea
  Oscar only showing 3 fields Mal777 5 173 02-01-2021, 06:26 PM
Last Post: Mal777
  PS BIPAP ASV not showing Flow Rate in Oscar 19MaleMabyeUARS? 1 152 01-06-2021, 10:59 PM
Last Post: Sleeprider
  Import Data not showing Mjmcd 2 203 11-23-2020, 07:38 AM
Last Post: OpalRose
  Missing Info in summary table Big Timber 5 277 08-29-2020, 10:10 AM
Last Post: Sleeprider
  OSCAR Overview Pressure Plot not showing real Max sopherFellow 8 328 08-17-2020, 11:09 AM
Last Post: Gideon


New Posts   Today's Posts






About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.