Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.
Login or Create an Account
Machine: ResMed Airsense 10 Autoset Mask Type: Full face mask Mask Make & Model: ResMed F30I Full Face Humidifier: ResMed HumidAir CPAP Pressure: 9.2-14.2 CPAP Software: OSCAR
New user still struggling after 4+ months. Thought the primary problem was major leaks, and in some cases that's true. Leak rate often much better without humidifier, so I usually turn humidifier off and put up with super dry mouth. (Have experimented with various humidifier settings, heated tube, even then have dry mouth). Unfortunately, even with no humidifier and minimal "time over leak redline," the apnea numbers are still not so good many nights, as in the attached example. Any tips or suggestions for changes to try? Thank you.
Machine: Needing iVAPS but QUACKS refusing to help but they love testing Mask Type: Not using mask Mask Make & Model: F&P Vitera on shelf Humidifier: None/nada CPAP Pressure: 0-0 pressure set CPAP Software: Not using software
Other Comments: SCS PVC K9D** Untreated CA Asthma Dr. Donothings
It looks like some Positional Apnea clusters from about 01:30-02:30, maybe other areas too. This requires an edit to your pillow or a soft cervical collar.
On the pillow aspect, is there a stack or a very thick single pillow? Yes then go thinner. If this doesn't help, then the collar may be your best bet.
If this is Positional, no pressure can power through. This Positional issue isn't like what's referred to in sleep testing. On the test, it means side, back, prone, the physical body position. Here with Positional Apnea, it means head and neck being positioned to kink the airway.
You can test to see if positional Apnea is an issue while awake. Sitting upright, point your chin down to your sternum. Any breathing issues?
INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEBSITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
I totally agree with positional apnea. The second thing I would look at is flow limits. You have quite a few flow limits. They are obstructive apnea just like O ant H events. We use EPR to treat them. The left hand column is cut off and showed you do have EPR on but not the level. It can be set at 1, 2 or 3. I would suggest setting it to 3.
10-12-2021, 02:41 PM (This post was last modified: 10-12-2021, 02:42 PM by CorruptAlligator.)
RE: Still struggling after 4 months
His EPR looks to be 3 if looking at the pressure chart at the starting point on the left. Your chart looks like how mine used to look for awhile when I was on full face masks. Now, I'm on nasal mask and with a collar, and my FL and AHI is lower.
Machine: ResMed Airsense 10 Autoset Mask Type: Full face mask Mask Make & Model: ResMed F30I Full Face Humidifier: ResMed HumidAir CPAP Pressure: 9.2-14.2 CPAP Software: OSCAR
Thank you for the several suggestions. I will work on positional apnea factor. As for EPR, I am using it at Level 3, so presumably no further change there is possible.
