Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

Summary Only
#1
Question 
I'm a new sleepy head user and have used it for three nights. I saw all the detailed graphs as well as summary data after each of the first two nights. For last night, under the daily tab, I see only the summary data on the left and no detailed graphs. There is a note at the bottom of the screen that says "summary data only". I closed the program and opened it again and the display changed. Not only were there no detailed graphs for last night but the pie chart in the summary section changed to a big yellow smiley face (It was a pie chart on the first view). I checked the two previous nights and the pie charts had also changed to smiley faces. I removed the card, reinserted it and imported the data again. A pop up said it imported two sessions but there should be three. Still only smiley faces in place of pie charts for all three sessions. I don't think I did anything differently. Does anyone know what I've done wrong? Unsure

Post Reply Post Reply
#2
The first thing to try is to rebuild your data.  Data->Rebuild CPAP Data->Machine name.
______________________
Useful Links -or- When All Else Fails:
Posting SleepyHead Charts in 5 Easy Steps
Robysue's Beginner's Guide to Sleepyhead
Apnea Helpful Tips
Post Reply Post Reply
#3
First thing that pops to mind is when I first got my S9. It seemed like it would not record the high sample rate data.
I unplugged the machine; waited about an hour for the capacitors to discharge; and repowered it.
Sort of a reboot. Worked fine after that.

Other things: (have to ask even if they sound like dumb questions) Was the SD card in the machine last night? Was the card unlocked for write? (I think it gives a warning if not unlocked.)
Post Reply Post Reply


#4
(02-09-2017, 10:19 AM)Melman Wrote: I'm a new sleepy head user and have used it for three nights. I saw all the detailed graphs as well as summary data after each of the first two nights. For last night, under the daily tab, I see only the summary data on the left and no detailed graphs. There is a note at the bottom of the screen that says "summary data only". I closed the program and opened it again and the display changed. Not only were there no detailed graphs for last night but the pie chart in the summary section changed to a big yellow smiley face (It was a pie chart on the first view). I checked the two previous nights and the pie charts had also changed to smiley faces. I removed the card, reinserted it and imported the data again. A pop up said it imported two sessions but there should be three. Still only smiley faces in place of pie charts for all three sessions. I don't think I did anything differently. Does anyone know what I've done wrong? Unsure

On the Daily page, to the left side.....go to the bottom under "sessions", be sure all the sessions boxes are checked to black/green(meaning on) and not Black/red.(meaning off).

Also on Daily Page, scroll to bottom of page to the far right and click on drop down box to see that the Graphs  show Black/Green.(Meaning on).
OpalRose
Apnea Board Moderator
www.ApneaBoard.com

How to Organize and Post ScreenShots

http://sleep.tnet.com/resources/sleepyhead/shorganize
https://sleep.tnet.com/reference/tips/imgur

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.




Post Reply Post Reply
#5
(02-09-2017, 10:51 AM)OpalRose Wrote: On the Daily page, to the left side.....go to the bottom under "sessions", be sure all the sessions boxes are checked to black/green(meaning on) and not Black/red.(meaning off).

Also on Daily Page, scroll to bottom of page to the far right and click on drop down box to see that the Graphs  show Black/Green.(Meaning on).

Thanks,

The flags under sessions were green but no Pie charts. I discovered by clicking on the sessions bar twice they changed to red , then back to green, and I had the pie charts again.  May be a bug in  the software.

No joy on the graphs. Clicking on the graphs "button" for the previous days toggles them on and off but that doesn't work for last night.

The SD card was in the machine and unlocked. When I inserted it there was a message that the card was being configured which is the same message I have seen each time I put it in the slot. So the card was OK. I assume, if not, I wouldn't have had the summary data.

Tried the data rebuild. No change. 

And, yes; the card was locked each time it was inserted in my PC.

I guess I'll see what happens tonight. Thanks for the support.

Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Sleepyhead showing summary only orava 4 228 09-17-2017, 06:28 PM
Last Post: orava
  Please help. SleepyHead quit its reliable display and summary of SpO2 data. 2SleepBetta 10 519 08-16-2017, 12:19 AM
Last Post: 2SleepBetta
Ohmy Sleepy head shows Summary Only :( aeilers 10 603 05-15-2017, 02:10 PM
Last Post: aeilers
  only Summary data showing jmark58 4 769 11-17-2016, 05:48 PM
Last Post: ncudmore
  resmed reader graph versus summary question wyogirl 0 347 04-08-2016, 08:50 PM
Last Post: wyogirl
  Ability to repeat summary report whmagill 1 434 02-08-2016, 05:09 PM
Last Post: AlanE
  ResScan Detailed vs. Summary Problem tired as hell 6 1,245 09-23-2015, 10:42 PM
Last Post: SuperSleeper

Forum Jump:

New Posts   Today's Posts




About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.

For any more information, please use our contact form.