Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

The dreaded 1019 error on a VPAP auto Resmed
#1
Hi all,
First time on here. The error 1019 on my display is for "low air flow" can someone tell me if I change the AWM730B5 Mass air sensor will this get me going? This code happened after an over fill of the humidifier.. Basically, does the start up sequence begin with the sensor or begin with the fan starting? I have now fan movement at all on power up...
Thanks
Harold
Post Reply Post Reply
#2
Assume you got all the water out of the hose and the machine has dried. This will not be a user-repairable item Suppliers 27 and 28 on the Supplier List are repair facilities. You can contact them, and I know that at least with Supplier 27 you can get an estimate before sending in the machine. Your DME can do this on your behalf, but I would expect it to take longer, and I don't know if the water damage is a warranty item or if it would be considered abuse.

The sensor together with the program logic act as a fan controller. It sounds like you may have damaged the main board with a short circuit. That would prevent any power from reaching the fan.

Good luck. I'm sure you're anxious to get your machine working as soon as possible. Do you have a standby unit, or will your DME loan you one while repairs occur?
Post Reply Post Reply
#3
Thank you! I have a much older unit that is chugging right along.. I'll contact your suggestions. I need a new sleep study for new equipment but NONE of the 5 disorder clinics will take my Blue cross Blue shield insurance.. Closest one is 60 miles away.
Thanks again!
Harold
Post Reply Post Reply


#4
Harold, what part of the world are you in? There might be some alternatives. Also, I get my prescriptions from my primary care doctor, an internal medicine specialist. While he would be glad to refer me to a sleep specialist, we have a relationship where he respects that I know what I need, and he writes the prescriptions as needed. I'm sure you know what you need as well.
Post Reply Post Reply
#5
We need to get this thread moved to the main forum...

My feeling is that water damage is nearly always to the sensors; which as Sleeprider points out are not user replaceable.

Mongo

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  [CPAP] ResMed Air Sense 10 Auto Off Problem Buddie43 18 4,767 03-21-2017, 03:23 PM
Last Post: CPAPPY262
Smile Q: ResMed CPAP S9 AutoSet vs. VPAP ST ??? dubli 16 4,121 03-20-2017, 10:10 PM
Last Post: Frieda
  S9 VPAP adapt curious results. Am I alone? Ikabodkrane 11 215 03-17-2017, 09:39 AM
Last Post: Sleeprider
Thumbsup [CPAP] resmed s9 auto set error message high temperature fault refer to owners manual beebsdaddy49 2 122 03-10-2017, 07:49 PM
Last Post: trish6hundred
  [Equipment] O2 Pressure/Diverter Valve with VPaP and ClimateLine Heated Hose? gamegrrl 7 185 02-28-2017, 02:00 PM
Last Post: gamegrrl
  [Equipment] S10 Auto vs Dream Machine auto silversnore 13 459 02-23-2017, 11:57 AM
Last Post: leadslinger
Sad [CPAP] Res Med S9 help! Error: Settings reset to default values, please contact service pr dexter020281 14 11,117 02-18-2017, 01:22 AM
Last Post: vsheline

Forum Jump:

New Posts   Today's Posts




About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.

For any more information, please use our contact form.