Apnea Board Moderator
www.ApneaBoard.com
___________________________________
Useful Links -or- When All Else Fails:
The Guide to Understanding OSCAR
OSCAR Chart Organization
Attaching Images and Files on Apnea Board
Apnea Helpful Tips
Hello Guest,
Welcome to Apnea Board !
Memory card error
|
02-25-2017, 12:36 PM
RE: Memory card error
sectorinfo is new to Windows 10. I used wmic DISKDRIVE get bytespersector, caption on my Win 7 Pro. All drives report 512 even though the default size for a FAT structure is 4K.
Crimson Nape
Apnea Board Moderator www.ApneaBoard.com ___________________________________ Useful Links -or- When All Else Fails: The Guide to Understanding OSCAR OSCAR Chart Organization Attaching Images and Files on Apnea Board Apnea Helpful Tips INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
02-25-2017, 02:08 PM
RE: Memory card error
as I thought ... formating with a greater clustersize will make the card unreadable for the device^^
all in all: Fat 16 - 512 Byte (or is it Bit?) ... just select the 512 from the drop-down menu in windows for the cluster size
05-22-2017, 07:25 PM
RE: Memory card error
(02-25-2017, 11:42 AM)pupcamper Wrote:(02-25-2017, 05:23 AM)TBMx Wrote: could you please check the clustersize of that working card? hey TBMx, this is what my card shows: https://www.screencast.com/t/lrVLyJMfi does this info tell you anything other than there is no info on my card? I purchased a new card tonight and it doesn't do anything either when I insert it into the card slot of my Dreamstation unit. any other ideas are appreciated
05-23-2017, 12:53 AM
RE: Memory card error
reformat it with filesystem = FAT 16 and sectorsize = 512 Bytes. (richt click in the windows explorer on the drive-letter and choose format)
And please give the sd-card a very simple name .. don' leave it completely blank - but just one word - no special chars.
05-23-2017, 06:49 AM
RE: Memory card error
(05-23-2017, 12:53 AM)TBMx Wrote: reformat it with filesystem = FAT 16 and sectorsize = 512 Bytes. (richt click in the windows explorer on the drive-letter and choose format) TBMx, I followed the instructions you posted as can be seen here: https://www.screencast.com/t/RrdQljcIkGdi Inserting the card in my machine still does nothing to initiate the data transfer from the cpap unit to the card. I'm starting to feel it could be the machine? Thanks for your attempts to help.
05-23-2017, 06:59 AM
RE: Memory card error
in the dropdown menu where the 2nd arrow points to: "allocation unit size" select 512 there
default for FAT is much larger than the 512 bytes - and just to be over careful - put in a "volume label" ... take "SDCARD" (all lower or upper letters ... just 1 word - no spaces - nothing fancy) put the SD-card in while the device has power but is not running / blowing out air. - wait some time ... put your mask on and turn it on for at least 10 minutes ... that should result in some data written to the card. (wait a while after turning the device off (just turn it off .. do NOT unplug the power!) before getting the card out of the device ... might take some time before the machine starts / finishes writing to the card) if that doesn't help either I'm out of options too ...
05-23-2017, 07:52 AM
RE: Memory card error
(05-23-2017, 06:59 AM)TBMx Wrote: in the dropdown menu where the 2nd arrow points to: "allocation unit size" select 512 there these are my options for formatting: https://www.screencast.com/t/JKEdC3nhbX28
05-23-2017, 08:14 AM
RE: Memory card error
open up a command prompt with admin rights. (press start type "command" wait shortly ... right click on command prompt (I hope it is named that way in english) and choose "run as admin")
there put this in (exactly!!! .. copy & paste with the right click of the mouse) and hit enter: format e: /FS:FAT /V:BEAR /A:512 /X .. keep your fingers crossed^^
05-23-2017, 06:47 PM
RE: Memory card error
(05-23-2017, 08:14 AM)TBMx Wrote: open up a command prompt with admin rights. (press start type "command" wait shortly ... right click on command prompt (I hope it is named that way in english) and choose "run as admin") Hey TBMx, I tried running the formatting per your instructions and received this response: https://www.screencast.com/t/VBMN6JVkchX2 I'm ready to request a new machine and see how it goes. I really appreciate your time and efforts to offer me assistance! Thank you very much! |
« Next Oldest | Next Newest »
|
Possibly Related Threads... | |||||
Thread | Author | Replies | Views | Last Post | |
OSCAR v1.5.2- error code 5, unable to write to data directory | sleepynotion | 2 | 204 |
03-18-2024, 12:09 PM Last Post: sleepynotion |
|
Error while installing OSCAR on Lenovo Chromebook | Bodie | 15 | 1,332 |
10-29-2023, 12:41 PM Last Post: Bodie |
|
Oscar cannot read SD card and SD card cannot be read by PC | BlueSky1958 | 1 | 691 |
08-21-2023, 06:41 PM Last Post: Sleeprider |
|
Oscar cannot read card - card cannot be read by PC | BlueSky1958 | 3 | 604 |
08-21-2023, 01:02 PM Last Post: Crimson Nape |
|
MADE USER NAME CHANGE TO MY COMPUTER: NEED HELP WITH OSCAR ERROR MESSAGE | Plmnb | 8 | 941 |
04-08-2023, 10:17 AM Last Post: Plmnb |
|
OSCAR error reading AirSense 10 Data | mjholdeman | 6 | 1,900 |
12-01-2022, 04:13 AM Last Post: Mspeker |
|
New Version, Access Denied Error 5 | wesozzzz | 1 | 697 |
08-23-2022, 07:21 PM Last Post: pholynyk |