Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

VPAP III additional settings
#1
Dear Members please I had a power fluctuation recently and it destroyed the power pack for my VPAP III. I was able to fix the power pack locally and machine is now working but all the settings have been erased. I have been able to redo the settings for the EPAP and IPAP pressure settings because I knew what they were from my original device document.

The challenge I am having is that there are additional settings required which I do not have information on. I also need to do a reset as well for the IPAPmin and IPAPmax and also Rise time as well as the Trigger Settings and Cylce settings.

Is there a way anyone on this forum can help with this. what I need are indicative settings for someone with air pressure of about EPAP:13 and IPAP:17 so i can start with this and tweak accordingly.

Post Reply Post Reply
#2
(06-17-2014, 12:06 PM)Kneeyowtee Wrote: Dear Members please I had a power fluctuation recently and it destroyed the power pack for my VPAP III. I was able to fix the power pack locally and machine is now working but all the settings have been erased. I have been able to redo the settings for the EPAP and IPAP pressure settings because I knew what they were from my original device document.

Both your doctor and whoever sold it to you should have a record of the settings. They should be able to tell you what it was.

Post Reply Post Reply
#3
I can give you the settings from my S8 VPAP auto running in Spontaneous (bi-level) mode if that is any help. If my experience is any indication, the other settings have been left at the factory settings. I am not sure about the IPAP min and IPAP max. Is the VPAP III an auto machine?

Best Regards,

PaytonA

P.S. On my machine the trigger and cycle settings are "med(ium)" for both bi-level and bi-level auto modes and the rise time is 700ms.
Post Reply Post Reply


#4
Hi Kneeyowtee,
WELCOME! to the forum.!
Hang in there for more suggestions and hopefully, you can get your machine reset.
Best of luck to you.
trish6hundred
Post Reply Post Reply
#5
(06-17-2014, 12:06 PM)Kneeyowtee Wrote: Dear Members please I had a power fluctuation recently and it destroyed the power pack for my VPAP III. I was able to fix the power pack locally and machine is now working but all the settings have been erased.

I'm about as big a "do-it-yourself" guy as you're likely to find, but if my machine was just fried and lost all it's settings, and it was something as complicated as yours, I'd take it to someone who works with them every day to make sure it's reconfigured properly, and that it actually does what it's supposed to and that it's actually doing what it's configured to do.

My last machine just "blew". I could verify it's operation with a glass of water and a metric ruler. Not sure how you would check a VPAP.


Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Bi-pap help with settings superdot5 6 182 08-17-2017, 05:46 PM
Last Post: robertbuckley
  [Pressure] Help w ResMed Aircurve 10 Vauto Settings BlueJay22 18 330 08-16-2017, 08:21 PM
Last Post: BlueJay22
  AHI numbers down. Am I OK with my settings? mraroid 7 217 08-16-2017, 12:39 PM
Last Post: Sleepster
  Dreamstation Mask Settings. JohnnyRotten 6 185 08-15-2017, 09:00 AM
Last Post: tomkatt
  Follow-Up Appt. with Doctor & Changing Own Settings rooy1960 10 667 08-09-2017, 08:13 AM
Last Post: SarcasticDave94
  VPAP and mask compatibility bigschtick 8 190 08-09-2017, 01:55 AM
Last Post: trish6hundred
  ResMed Mini settings kderevan 7 1,066 08-07-2017, 08:35 PM
Last Post: JackLam

Forum Jump:

New Posts   Today's Posts




About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.

For any more information, please use our contact form.