Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

Which machine do I have?
#1
I have a used unit from my husband.It is by Resmed. I have to order the instruction manual but have no idea which one this is. All I have are the serial # 20070419875 and then the # A260-311-1 by where it says Resmed. I have no idea how to find out which one I have. Any ideas out there besides going to a Dr ? Thanks for your help in advance!
Post Reply Post Reply
#2
Welcome rr69conv, depending on how old it is the model should be next to the power button. It will probably either be a Escape, Elite or Autoset.
Post Reply Post Reply
#3
If you can't figure it out, take a photo it. We can narrow it down by what it looks like.
PaulaO2
Apnea Board Moderator
www.ApneaBoard.com


Breathe deeply and count to zen.

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.




Post Reply Post Reply


#4
Hi rr69conv,
WELCOME! to the forum.!
Hang in there for more responses to your post and much success to you.
trish6hundred
Post Reply Post Reply
#5
Welcome, rr.

Tell us -EVERYTHING- it says on the top of the machine. (Everything)

Or take a clear picture where we can read the text, put it on a site like imgur.com, and post a link. Leave the "http" part of the link, since you're a newbie, the site won't let you post a link.
Get the free SleepyHead software here.
Useful links.
Click here for information on the main alternative to CPAP.
If it's midnight and a DME tells you it's dark outside, go and check it yourself.
Post Reply Post Reply
#6
Hi rr69conv, welcome to Apnea Board.

As the others have said, you can take a picture of your machine. Alternatively look at this page to see if you recognise it: http://www.apneaboard.com/cpap-machine-p...ur-machine
DeepBreathing
Apnea Board Moderator
www.ApneaBoard.com


Bed

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply


#7
I can tell by the serial number that the machine was manufactured in 2007, which would be an S8-series machine. The settings aren't too difficult (unless it's a VPAP). You can access the clinician's menu by holding down the down arrow and right arrow buttons for 3 seconds. That may be enough to get you started.
Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
Exclaimation CPAP Machine Choices - read this before you accept a new machine SuperSleeper 28 17,115 08-04-2017, 04:10 PM
Last Post: Sleeprider
  Pin from power plug stuck in machine ResMed cpap machine B10576 11 631 06-05-2017, 09:04 PM
Last Post: CB91710
  machine died! Now new doctor and new machine Bjazzman 13 934 05-04-2017, 10:03 PM
Last Post: Sleeprider

Forum Jump:

New Posts   Today's Posts




About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.

For any more information, please use our contact form.