Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

WiFi SD Card Data-transfer to ResScan & SH for The Rest of Us
#31
It seems like everyone is using the Toshiba Flash Air. What about the Eyefi wireless SD card? Any good? Has anyone tried it with an xpap?
Coffee
Post Reply Post Reply
#32
IIRC there were issues with it such as you can only retrieve image files off of it (how stupid is that)
هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه
Tongue Suck Technique for prevention of mouth breathing:
  • Place your tongue behind your front teeth on the roof of your mouth
  • let your tongue fill the space between the upper molars
  • gently suck to form a light vacuum
Practising during the day can help you to keep it at night

هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه هههههه
Post Reply Post Reply
#33
Indeed since it restricts the market for the product. Not too bright.
Coffee
Post Reply Post Reply


#34
Will FlashPap work with a SanDisk SDHC Class 4 Eye-Fi Wireless SD Card as well as the Flashair cards with my AS10?
Thanks
Post Reply Post Reply
#35
(12-24-2015, 10:55 PM)cpapdhf Wrote: Will FlashPap work with a SanDisk SDHC Class 4 Eye-Fi Wireless SD Card as well as the Flashair cards with my AS10?
Thanks

Sleep Master and FlashPap are both written around the Toshiba FlashAir and will not work with other wireless sd cards.

Tom
Post Reply Post Reply
#36
(12-25-2015, 03:31 AM)Jack_Russell_Fan Wrote:
(12-24-2015, 10:55 PM)cpapdhf Wrote: Will FlashPap work with a SanDisk SDHC Class 4 Eye-Fi Wireless SD Card as well as the Flashair cards with my AS10?
Thanks

Sleep Master and FlashPap are both written around the Toshiba FlashAir and will not work with other wireless sd cards.

Tom

I received a Toshiba 16GB FlashAir card for Christmas and just installed it using the excellent directions above. The card is pretty cool in that it can be configured for different uses with a simple config file that is well documented by Toshiba. However, for our purposes, the above steps are all that's needed. I'd gotten lazy about pulling my SD card and importing into Rescan so I was a little surprised about leak rates that were higher than I expected. That has prompted me to make some readjustments and now it is much easier to check my stats. Thanks again for this forum and the person that posted the original instructions. I'm using FlashPAP, Rescan, and the Toshiba FlashAir with Windows 10. The cost of the FlashAir card is around $25.00 - totally worth it. And, FlashPAP really makes it easy to pull down the data. Highly recommended!
Post Reply Post Reply


#37
(01-01-2016, 05:01 PM)Dagmar Wrote:
(12-25-2015, 03:31 AM)Jack_Russell_Fan Wrote:
(12-24-2015, 10:55 PM)cpapdhf Wrote: Will FlashPap work with a SanDisk SDHC Class 4 Eye-Fi Wireless SD Card as well as the Flashair cards with my AS10?
Thanks

Sleep Master and FlashPap are both written around the Toshiba FlashAir and will not work with other wireless sd cards.

Tom

I received a Toshiba 16GB FlashAir card for Christmas and just installed it using the excellent directions above. The card is pretty cool in that it can be configured for different uses with a simple config file that is well documented by Toshiba. However, for our purposes, the above steps are all that's needed. I'd gotten lazy about pulling my SD card and importing into Rescan so I was a little surprised about leak rates that were higher than I expected. That has prompted me to make some readjustments and now it is much easier to check my stats. Thanks again for this forum and the person that posted the original instructions. I'm using FlashPAP, Rescan, and the Toshiba FlashAir with Windows 10. The cost of the FlashAir card is around $25.00 - totally worth it. And, FlashPAP really makes it easy to pull down the data. Highly recommended!

My pleasure. Glad they worked for you, Tom.
Post Reply Post Reply
#38
(01-01-2016, 05:01 PM)Dagmar Wrote:
(12-25-2015, 03:31 AM)Jack_Russell_Fan Wrote:
(12-24-2015, 10:55 PM)cpapdhf Wrote: Will FlashPap work with a SanDisk SDHC Class 4 Eye-Fi Wireless SD Card as well as the Flashair cards with my AS10?
Thanks

Sleep Master and FlashPap are both written around the Toshiba FlashAir and will not work with other wireless sd cards.

Tom

I received a Toshiba 16GB FlashAir card for Christmas and just installed it using the excellent directions above. The card is pretty cool in that it can be configured for different uses with a simple config file that is well documented by Toshiba. However, for our purposes, the above steps are all that's needed. I'd gotten lazy about pulling my SD card and importing into Rescan so I was a little surprised about leak rates that were higher than I expected. That has prompted me to make some readjustments and now it is much easier to check my stats. Thanks again for this forum and the person that posted the original instructions. I'm using FlashPAP, Rescan, and the Toshiba FlashAir with Windows 10. The cost of the FlashAir card is around $25.00 - totally worth it. And, FlashPAP really makes it easy to pull down the data. Highly recommended!

What kind of WiFi range can one expect? I realize that will be dependent on the setup in the home.
My Asus router 80211bgn router is 2 floors below my bedroom in a wooden 3 level house and it works well with all WiFi devices at that level which include phone, laptop and internet audio streaming devices. Signal strength is ~ -60dBm. I realize the Flashair card hasn't much of an antenna built in and probably is not transmitting much power and was wondering whether I have any chance of realizing reasonable connectivity under those conditions. Is anyone having success under similar conditions?

Post Reply Post Reply
#39
(01-04-2016, 05:26 PM)cpapdhf Wrote:
(01-01-2016, 05:01 PM)Dagmar Wrote:
(12-25-2015, 03:31 AM)Jack_Russell_Fan Wrote: Sleep Master and FlashPap are both written around the Toshiba FlashAir and will not work with other wireless sd cards.

Tom

I received a Toshiba 16GB FlashAir card for Christmas and just installed it using the excellent directions above. The card is pretty cool in that it can be configured for different uses with a simple config file that is well documented by Toshiba. However, for our purposes, the above steps are all that's needed. I'd gotten lazy about pulling my SD card and importing into Rescan so I was a little surprised about leak rates that were higher than I expected. That has prompted me to make some readjustments and now it is much easier to check my stats. Thanks again for this forum and the person that posted the original instructions. I'm using FlashPAP, Rescan, and the Toshiba FlashAir with Windows 10. The cost of the FlashAir card is around $25.00 - totally worth it. And, FlashPAP really makes it easy to pull down the data. Highly recommended!

What kind of WiFi range can one expect? I realize that will be dependent on the setup in the home.
My Asus router 80211bgn router is 2 floors below my bedroom in a wooden 3 level house and it works well with all WiFi devices at that level which include phone, laptop and internet audio streaming devices. Signal strength is ~ -60dBm. I realize the Flashair card hasn't much of an antenna built in and probably is not transmitting much power and was wondering whether I have any chance of realizing reasonable connectivity under those conditions. Is anyone having success under similar conditions?


Sorry, I don't know the answer to that but you could try it and turn off the noise correction feature which will increase the available distance.



https://www.flashair-developers.com/en/d...ISE_CANCEL

(Improve connection at the cost of decreased range of the signal, which can be beneficiary in a noisy environment)


Post Reply Post Reply


#40
[/quote]

What kind of WiFi range can one expect? I realize that will be dependent on the setup in the home.
My Asus router 80211bgn router is 2 floors below my bedroom in a wooden 3 level house and it works well with all WiFi devices at that level which include phone, laptop and internet audio streaming devices. Signal strength is ~ -60dBm. I realize the Flashair card hasn't much of an antenna built in and probably is not transmitting much power and was wondering whether I have any chance of realizing reasonable connectivity under those conditions. Is anyone having success under similar conditions?
[/quote]


Sorry, I don't know the answer to that but you could try it and turn off the noise correction feature which will increase the available distance.


[/quote]

What kind of range are you experiencing? How far apart is your cpap from your wifi router?

Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  FlashPAP - FlashAir WiFi SD card utility TiredToo 189 32,294 2 hours ago
Last Post: E.W.
Arrow [Admin Note] ResScan - [version 5.7] SuperSleeper 70 11,536 02-11-2017, 03:11 PM
Last Post: MortR
  ResMed s9 SD card unrecognized by ResScan or S'Head krebb21 3 199 02-01-2017, 04:10 AM
Last Post: TBMx
  resscan software download sdouros 7 488 01-30-2017, 08:14 PM
Last Post: Beej
  Can you transfer computer data (Rescan or Sleepyhead) back to a SD Card? calcuttaman 6 247 01-26-2017, 08:33 AM
Last Post: AlanE
Question How do I erase older data in resScan? justMongo 4 225 01-17-2017, 01:29 PM
Last Post: AlanE
  Error dowloading data from Sd card for system one machine dangood_47 2 150 01-13-2017, 11:49 AM
Last Post: Sleeprider

Forum Jump:

New Posts   Today's Posts




About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.

For any more information, please use our contact form.