Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

Wrong Times on SleepHead Graphs
#1
Wrong Times on SleepHead Graphs
I just started using the SleepyHead software for my new machine, so I apologize if this question has an obvious solution.

When I imported the data from the SD card this morning, all the graphs show the therapy start time around 21:30 and the end time around 03:30. I know I didn't put the mask on until roughly 23:30 and took it off around 06:30. Is there some setting I'm missing to get the correct times? It is giving me the full 6 or so hours of therapy information, but I think it would be beneficial to know the exact times of certain events. Am I correct?

Thanks.
Post Reply Post Reply
#2
RE: Wrong Times on SleepHead Graphs
It's quite possible that the time and date settings inside the AirSense 10 are incorrect. You will have to go into the Clinicians' menu to check and set the time. Hold both the round knob and the Home button down for about five seconds to get into that menu. Scroll down to the Time and Date and check and set them using the round knob. You can't set the date back, and you can't set the time back to during any already recorded data. It seems like your time needs to be set forward, so that shouldn't be a problem.

While you are in the set up menus check and change the Essentials item from On to Plus, to see lots more useful data in the on-screen sleep report each morning.

If you haven't gotten the set up manual yet, click on the CPAP Setup Manuals link in the black bar at the top, and follow the instructions to request the manual for your CPAP machine.
Post Reply Post Reply
#3
RE: Wrong Times on SleepHead Graphs
Thanks so much, pholynyk. I didn't think of that, and further more didn't even know how to do it.
I'll give it a shot first chance I get.
Post Reply Post Reply
#4
RE: Wrong Times on SleepHead Graphs
Yep, that was the problem.
One would think that the time setting would be one thing that should be correct.....wouldn't one?

Thanks again.
Post Reply Post Reply
#5
RE: Wrong Times on SleepHead Graphs
The clock will drift over time. You will need to check it every so often.
Crimson Nape
Apnea Board Moderator
www.ApneaBoard.com
___________________________________
Useful Links -or- When All Else Fails:
The Guide to Understanding OSCAR
OSCAR Chart Organization
Attaching Images and Files on Apnea Board
Apnea Helpful Tips

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#6
RE: Wrong Times on SleepHead Graphs
(10-06-2017, 06:56 PM)Crimson Nape Wrote: The clock will drift over time. You will need to check it every so often.
Thanks, I'll keep my eye on it.
Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
Question Editing session start/end times within OSCAR jas102543 6 1,579 03-12-2024, 03:09 PM
Last Post: j12251225
  Time listed: Wrong end time? How to fix? Plmnb 5 201 03-08-2024, 08:57 AM
Last Post: Crimson Nape
  Graphs switched off? cberistain 17 2,032 02-27-2024, 07:11 PM
Last Post: Crimson Nape
Question Exporting OSCAR Graphs Wizard99 2 248 02-09-2024, 07:50 PM
Last Post: Wizard99
  Wrong Equipment Displayed During Oscar startup Aknakon 4 494 01-18-2024, 07:32 PM
Last Post: Crimson Nape
  Problems displaying graphs on Daily page SueB 4 564 11-14-2023, 08:05 PM
Last Post: SueB
  Missing graphs, Philips BiPAP autoSV Advanced 30 SenatorBirch 7 649 10-22-2023, 08:52 AM
Last Post: Crimson Nape


New Posts   Today's Posts


About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.