card reader and sleepyhead
New user here Running WIndows 7. Just got the sd card reader. device shows up under windows device manager - Mako DT3500 SmartCard Reader.
Sleepyhead software fist gives warning to write-protect card. I have an encorepro card. There is no "lock" on it. So I stuck it in the reader anyways. Does the reader show up as a drive in windows, because I do not see one. When I try to run sleepyhead (brokenGL version), it cannot find the reader. Any suggestions?
RE: card reader and sleepyhead
Consider installing the device driver from mako for your card reader and your OS. This should fix your problem.
RE: card reader and sleepyhead
(09-28-2016, 07:43 PM)nobody102 Wrote: New user here Running WIndows 7. Just got the sd card reader. device shows up under windows device manager - Mako DT3500 SmartCard Reader.
Sleepyhead software fist gives warning to write-protect card. I have an encorepro card. There is no "lock" on it. So I stuck it in the reader anyways. Does the reader show up as a drive in windows, because I do not see one. When I try to run sleepyhead (brokenGL version), it cannot find the reader. Any suggestions?
You are trying to read a Respironics SMARTcard from a M-Series unit, not a SD card from a more contemporary CPAP. Sleepyhead will not work with that device, and you will need to use the EncoreBasic program available from the forum.
http://www.apneaboard.com/forums/Thread-...nly-thread
The Mako DT3500 driver needs to be used to configure the drive, and it will only work with EncoreBasic or Pro. When you upgrade to a current machine like System One or Dreamstation, then you can use Sleepyhead with the SD cards in those machines.
RE: card reader and sleepyhead
OK thanks. installing the encorebasic now. Fingers crossed!
