05-01-2019, 06:56 AM
RE: help [complex sleep apnea, AirCurve 10 settings]
0.1 congrats, you will crack your first 0.0 soon. Who doesn't want to look at a 0.1 chart 
Until the leaks are fixed, there isn't a lot to do. The basics are done. The tidal volume and minute vent lines don't dip too much. Once the leaks and any positional is sorted, you might want to open up the maxPS more and may need min epap9, time will tell.
Until the leaks are fixed, there isn't a lot to do. The basics are done. The tidal volume and minute vent lines don't dip too much. Once the leaks and any positional is sorted, you might want to open up the maxPS more and may need min epap9, time will tell.
mask fit http://www.apneaboard.com/wiki/index.php...ask_Primer
For auto-cpap, from machine data or software. You can set the min pressure 1 or 2cm below 95%. Or clinicians commonly use the maximum or 95% pressure for fixed pressure CPAP, this can also be used for min pressure.
https://aasm.org/resources/practiceparam...rating.pdf
For auto-cpap, from machine data or software. You can set the min pressure 1 or 2cm below 95%. Or clinicians commonly use the maximum or 95% pressure for fixed pressure CPAP, this can also be used for min pressure.
https://aasm.org/resources/practiceparam...rating.pdf
