[Pressure] Help!

[joesarah2830]

I need a bit of help. My pressure is set at 11. When I first received the machine it would work it's way up to 11, not it starts at 11....How can I correct this so it starts at 4.5 and works to 11

[OpalRose]

Welcome to Apnea Board joesarah2830,

Request by email the clinicians manual for your machine. It will tell you how to setup the ramp and/or change your pressure settings.
http://www.apneaboard.com/adjust-cpap-pr...tup-manual

Have you just started therapy, or have you been on CPAP for awhile?
Let us know if you have other questions.

[zonk]

I need a bit of help. My pressure is set at 11. When I first received the machine it would work it's way up to 11, not it starts at 11....How can I correct this so it starts at 4.5 and works to 11

Hi joesarah2830
The machine in your profile "phillips respironics remsrar se", this thread may helps http://www.apneaboard.com/forums/Thread-...structions

Did you get machine through your insurance or bought on-line?
The 'SE' model is not data capable machine, get the job done somewhat
but does not report useful data for your doctor to see how the treatment is working

[trish6hundred]

Hi joesarah2830,
WELCOME! to the forum.!
You can turn on your ramp feature and that will start at 4 and work up to the pressure of 11.
Hang in there for more responses to your post and much success to you with your CPAP therapy.