Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

new2me machine - model?
#1
new2me machine - model?
I just got this used machine, and I'm trying to find out the model so that I can request a clinician manual.

It's a Resmed Air10 according to the label on the bottom.

The _specific_ model label is gone from the lower right of the slate grey / black main unit. It does have the attachable clear plastic humidifier chamber.

I accessed the menu according to the instructions on this site, and it can apparently be set to "Auto", not just CPAP.

I also cleared the SD card while I was there; afterward, several settings seemed to remain.

It apparently has a modem (wifi?), and there's an "Airplane" mode setting. I think there's also a section for a "provider"; but right now I'm not sure if it was greyed out or not.

On the back, there's a serial number, a catalog number, a batch code; and: a device number DN601.

And thoughts which model?
Post Reply Post Reply






Donate to Apnea Board  
#2
RE: new2me machine - model?
What does it say on the front, lower right below the screen.

I strongly suspect you have the ResMed AirSense 10 AutoSet.
Fred Bonjour - Project Manager and Lead Tester for OSCAR - Open Source CPAP Analysis Reporter 
OSCAR

Download OSCAR
New to Apnea? Helpful tips to ensure success
Soft Cervical Collar
Mask Primer
Dealing with a DME
Organize Charts
Attaching Charts

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#3
RE: new2me machine - model?
If it can be set to Auto mode, then you have the AirSense 10 AutoSet.
Check the name on your machine.

   
OpalRose
Apnea Board Administrator
www.ApneaBoard.com

OSCAR Chart Organization


INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE.  ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA.  INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#4
RE: new2me machine - model?
Right, but the _specific_ model label is gone from the front [my bad] lower right of the slate grey / black main unit. 

I am asking only because I want to request a clinician manual for it, and I don't want to violate the "two request" rule.

I was thinking the description and the information on the back would be determinative, as the model label is missing from the front.

I'll ask for the manual for the model you mentioned.

The user manuals which were included reference 4 different models.

 I'm going to need the reporting capabilities, so I'll have to clear references to the previous owner.

My previous is a straight CPAP, with ramp-up and a run-time hour counter on the bottom. Old school, from 199x. Not sufficient for several employment opportunities, but great for just me; I just needed new supplies periodically.
Post Reply Post Reply






Donate to Apnea Board  
#5
RE: new2me machine - model?
Request the AutoSet manual, if that is not correct I guarantee that you can request another manual.
Fred Bonjour - Project Manager and Lead Tester for OSCAR - Open Source CPAP Analysis Reporter 
OSCAR

Download OSCAR
New to Apnea? Helpful tips to ensure success
Soft Cervical Collar
Mask Primer
Dealing with a DME
Organize Charts
Attaching Charts

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#6
RE: new2me machine - model?
If intact, wouldn't the machine info label on the back supply the model number for you? There should be info on serial and device numbers SN and DN.
Dave

OSCAR
Standard OSCAR Chart Order
Mask Primer
Dealing With A DME
Soft Cervical Collar Wiki
INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEBSITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#7
RE: new2me machine - model?
You list the color as being black with slate gray. What color is the housing area around the display and the big knob? You have 3 choices, black, gray, or off-white.
Crimson Nape
Apnea Board Moderator
www.ApneaBoard.com
___________________________________
Useful Links -or- When All Else Fails:
OSCAR Chart Organization
Attaching Images and Files on Apnea Board
Beginner's Guide to Sleepyhead and OSCAR
Apnea Helpful Tips

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply






Donate to Apnea Board  
#8
RE: new2me machine - model?
Fred: done, thanks.

Dave94: were you actually _being_ sarcastic? In my first post of the description I mentioned the DN, and the rest of the available information on the back label. The question would be how to translate that information, like translating a VIN.
Post Reply Post Reply
#9
RE: new2me machine - model?
Nape: that would be black.

I'll describe it as a slate grey (dark grey) housing, with a black (dark, smoky translucent) front/top 'presentation' cover.

[edit: a black bezel around the display]
Post Reply Post Reply
#10
RE: new2me machine - model?
When you use Oscar it normally shows the model on the left column.
Apnea (80-100%) 10 seconds, Hypopnea (50-80%) 10 seconds, Flow Limits (0-50%) not timed 
Cervical Collar     Dealing w DME     Chart Organizing
Post Reply Post Reply






Donate to Apnea Board  


Possibly Related Threads...
Thread Author Replies Views Last Post
Question REMstar System One - not sure which model redfive71 7 116 10-11-2020, 05:14 AM
Last Post: OpalRose
Question Where are blower hours on a Respironics Bipap Auto? Pre - system 1 model Mosquitobait 7 122 10-05-2020, 12:59 PM
Last Post: Mosquitobait
Idea DreamStation owners - identifying your specific model [done] SuperSleeper 19 9,488 09-11-2020, 04:50 PM
Last Post: newb
Exclaimation CPAP Machine Choices - read this before you accept a new machine SuperSleeper 158 173,139 09-06-2020, 06:22 PM
Last Post: 53lowt
  Does Resmed AirCurve 10 CS PaceWave has the same function as the north american model struts 3 152 07-18-2020, 08:05 PM
Last Post: SarcasticDave94
  New ResMed S9 - how to tell which model KarenK 16 6,518 01-01-2020, 10:44 AM
Last Post: ApneaQuestions
  NOTICE: New PR Dreamstation Model "Expert" bonjour 5 607 12-03-2019, 07:53 PM
Last Post: SuperSleeper


New Posts   Today's Posts






About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.