Hello Guest,Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address. Login or Create an Account
problems with moisture in mask
02-07-2014, 10:54 AM
I have an S9 Resmed with a heated tube and no matter how I set the temperature for humidification, moisture seeps into my mask and keeps waking me up. I get up several times a night to change the mask. I've tried lowering the temperature to no avail. Last nite I shut off the epr and it seemed a little better. Does that make any sense.
02-07-2014, 11:16 AM
WELCOME! to the forum.!
Hang in there for suggestions to help you with your problem and best of luck to you.
02-07-2014, 11:45 AM
I have the same machine and set up. I know I don't have this problem if I go back to not using the heated hose or humidifier. You might try this and see if it stops this.
I'm new so I'm having to try this and that to get get my end results.
EPR got nothing to do with the humidifier. If you,re using the heated hose (climateline) on auto mode, you can adjust temperature to your preference while protecting against rainout
ClimateLine user instructions http://www.resmed.com/au/assets/document...lo_eng.pdf
Moisture in the mask is from your breath condense in the mask especially if the room air is cold. Warming the air in the room and hose cosy may helps, mask liner also helps absorb some of the moisture
02-07-2014, 01:29 PM
I can only speak about my short experience. Hanging the hose above my head basically eliminated any moisture getting to my mask. I did not adjust the machine settings so it must have been the positioning of the hose.
02-08-2014, 07:25 PM
Hi there i am new to the forum, i had this problem myself it was driving me crazy, i bought an after market heater tube from sleep zone.
as this is a dedicated heater tube it fits in place of your original one.
it works a treat, no more 'RAINOUT" as they call it.
02-08-2014, 07:31 PM
WELCOME! to the forum.!
(02-08-2014, 07:25 PM)itizmeagain Wrote: Hi there i am new to the forum, i had this problem myself it was driving me crazy, i bought an after market heater tube from sleep zone.Hi itizmeagain, welcome aboard
Sleep Zone (Aussie heated hose) works with machines without the heated hose option
Both S9 and PRS1 (60 series) comes with the heated hose option and don,t need separate power supply
02-08-2014, 08:53 PM
Yes mine has a heater hose supplied with it, which isn't very good it just doesn't "cut the mustard"
thats why i opted for the sleep zone hose, never had problem again when using it in the cooler months.
very good investment.
i had to get the hose with its power supply which is a hassle, but working on a controller so it will only come on when temperature is low and moisture becomes a problem.
during the warmer months its not required though.
|Possibly Related Threads...|
|Bipap AVAPS problems||samianwardcummings||10||344||
Yesterday, 07:12 AM
Last Post: Sleeprider
|Problems with AirFit P10 Nasal Pillows (+ResMed AirSense 10)||numari||18||6,995||
03-23-2017, 11:36 AM
Last Post: PaytonA
|So I just had words with my DME @ Pacific pulmonary problems||MzRobin28||4||196||
03-08-2017, 10:40 PM
Last Post: MzRobin28
|Vertigo/CPAP Pressure Update- CPAP causing inner ear problems||SuperSleeper||70||67,498||
03-05-2017, 08:26 PM
Last Post: Melman
|nuance to Swift FX for her setting problems||akdog30||11||356||
02-11-2017, 11:18 AM
Last Post: Ghost1958
|S9 presssure problems||E.W.||7||321||
01-14-2017, 09:43 AM
Last Post: E.W.
|Problems with my humidifier settings......||binky12||9||618||
01-02-2017, 06:20 PM
Last Post: binky12