Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

s/o Sleepyhead and the ResMed Oximeter (it works!)
#31
RE: s/o Sleepyhead and the ResMed Oximeter (it works!)
Hi,

I have a grey Nonin Xpod from when I was daft enough to have bought all the oxy kit for a much older resmed machine it has a 3 pin (female) on the machine end and a serial port type plug on the other, but I don’t know how to be sure how many of the 9 holes are live, using a light and a magnifier it looks like it has a metal ring in 7 of the holes,but can’t be sure there are definitely 9 holes and no dummy positions, would you be able to advise me on whether or not I have been lucky  or not ? the ir sensor is noin and has 344 in the moulding of the plug, the finger end is a tape on bare bones job, they all came from Resmed UK.

Cheers

Chrissifer
Post Reply Post Reply



Donate to Apnea Board  
#32
RE: s/o Sleepyhead and the ResMed Oximeter (it works!)
(12-27-2018, 12:02 PM)Chrissifer Wrote: Hi,

I have a grey Nonin Xpod from when I was daft enough to have bought all the oxy kit for a much older resmed machine it has a 3 pin (female) on the machine end and a serial port type plug on the other, but I don’t know how to be sure how many of the 9 holes are live, using a light and a magnifier it looks like it has a metal ring in 7 of the holes,but can’t be sure there are definitely 9 holes and no dummy positions, would you be able to advise me on whether or not I have been lucky  or not ? the ir sensor is noin and has 344 in the moulding of the plug, the finger end is a tape on bare bones job, they all came from Resmed UK.

Cheers

Chrissifer

What model XPOD?
What model ResMed?
What model ResMed adapter? 
What do you wish to accomplish? 
You can always contact Nonin's Developer Department for Pin-Out information, but ResMed is rarely cooperative in providing information regarding their devices.
Have you called or emailed Kevin Cooper (Supplier #19) to ask for any advice?

-- steve
"The object in life is not to be on the side of the majority, but to escape finding oneself in the ranks of the insane." -- Marcus Aurelius
Post Reply Post Reply
#33
RE: s/o Sleepyhead and the ResMed Oximeter (it works!)
Hi, thank you for responding.

The xpod is a 3012.
My APAP is a Resmed S9 autoset
I don’t have the interphase between the S9 and the nonin xpod, not much point in getting one if the bits I’ve got are not going to work with it.

My intention is to use what I have got already, to measure my spo2 and pulse if it works with the resmed pulseox interphase module.

I hav not contacted any one else yet.

Cheers

Chris
Post Reply Post Reply
#34
RE: s/o Sleepyhead and the ResMed Oximeter (it works!)
Chris,

I, too, have an XPOD 3012, but the 3012LP (Low Power Version) on the S10. 
Contact one of your local vendors and check the connections from the XPOD to ResMed Oximetry Adapter  
On one side of my XPOD there is a 9-pin the hooks into the O2 finger probe. 

|oooxo |   (top 5 pins with one missing pin next to last)
| ooxo  |   (botton 3 pins with one missing pin next to last)

On the other side of the XPOD there is a round 3-pin keyed connector that attaches to the ResMed Adapter (which plugs into the S10). It looks like the S9 adapter also uses the 3-pin input but is different from the S10 adapter.
"The object in life is not to be on the side of the majority, but to escape finding oneself in the ranks of the insane." -- Marcus Aurelius
Post Reply Post Reply



Donate to Apnea Board  
#35
RE: s/o Sleepyhead and the ResMed Oximeter (it works!)
Man, that thing is awesome. I bought a CMS50F that is impossible to sync with my sleepyhead data. I'm assuming the oximeter tech is better with this than the Contec product? Do you have data chart that shows your oximetry synced to the cpap data? I am curious what it looks like.
Post Reply Post Reply
#36
RE: s/o Sleepyhead and the ResMed Oximeter (it works!)
Send me a PM with your email and I will forward some screen shots to you.
"The object in life is not to be on the side of the majority, but to escape finding oneself in the ranks of the insane." -- Marcus Aurelius
Post Reply Post Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  New Resmed Airsense 10 user help w/settings sleepyhead report mark1107 20 474 05-16-2019, 12:23 AM
Last Post: mark1107
  How important is an Oximeter? Arik 25 1,379 04-21-2019, 05:01 PM
Last Post: steve823
  how to use resmed vpap adapt sv with sleepyhead john greve 13 302 04-17-2019, 11:56 PM
Last Post: DeepBreathing
  Need a Multi-Session Recording Oximeter that Won't Die mdmarmd 2 274 04-12-2019, 08:01 PM
Last Post: mdmarmd
  O2/oximeter monitors CZOscar 5 414 01-19-2019, 08:33 AM
Last Post: CZOscar
  therapy ever stop working after it works for a while? logit 4 273 01-15-2019, 09:15 AM
Last Post: SarcasticDave94
  [Equipment] Finding a pulse oximeter that works with Mac ksvanhorn 7 988 01-03-2019, 09:25 AM
Last Post: Sleeprider


New Posts   Today's Posts






About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.