Hello Guest, Welcome to Apnea Board !
As a guest, you are limited to certain areas of the board and there are some features you can't use.
To post a message, you must create a free account using a valid email address.

or Create an Account


New Posts   Today's Posts

[split] 64Gb FlashAir WiFi Setup Problems (todivefor)
#11
RE: FlashPAP - FlashAir WiFi SD card utility
I have a 32GB FlashAir card.  Here is my CONFIG file for use with FlashPap:

[Vendor]

CIPATH=/DCIM/100__TSB/FA000001.JPG
APPMODE=5
APPNETWORKKEY=*****************
VERSION=F15DBW3BW4.00.01
CID=02544d535733324755e2d7ca7a011c01
PRODUCT=FlashAir
VENDOR=TOSHIBA
APPNAME=flashair

MASTERCODE=0123456789AB
LOCK=1
APPSSID=BlueDragon
DHCP_Enabled=NO
IP_Address=192.168.20.77
SUBNET_MASK=255.255.255.0

UPLOAD=1
NOISE_CANCEL=0
STA_RETRY_CT=0
DNSMODE=1
APPAUTOTIME=0
TIMEZONE=-28
WebDAV=1

Note especially the APPMODE=5.  APPSSID is the name of your network.  My IP address is outside of my DHCP range.  Of course, you must set APPNETWORKKEY to your network password any time you update the CONFIG file.

The "expired" message is related to DHCP.  If you IP address is now outside the DHCP range, that message should not have any significance.  You can always reboot your router if you suspect it is confused.
The current version of OSCAR is 1.2.0.  We recommend upgrading from any earlier version.

Useful links
Download OSCAR
Best way to organize charts
How to attach charts to your post

Membership in the Advisory Members group does not imply medical expertise or qualification for advising Sleep Apnea patients concerning their treatment.
Post Reply Post Reply






Donate to Apnea Board  
#12
RE: FlashPAP - FlashAir WiFi SD card utility
After rebooting your router, try pinging the ip address of the FlashAir card to see if it is reachable.

Open Terminal and type the following:
Code:
ping -c5 192.168.1.220

You can also try this in Terminal to see if it lists the FlashAir card on your network:
Code:
arp -a
It should give you a list of currently used active IP addresses on your network.

Which editor did you use to modify the config file?
Using a 13" MacBook Air (2017), MacOS Catalina (10.15.7), OSCAR v1.2.0
In a VM: Win10 1909 (18363.836)

Installing OSCAR on a Mac
Organizing your OSCAR charts
Attaching images and files for the forum
OSCAR Help
OSCAR Data Interpretation
Post Reply Post Reply
#13
RE: FlashPAP - FlashAir WiFi SD card utility
GuyScharf my config looks about the same as yours with some of values different. I changed APPMODE=4 to 5 which Crimson Nape had asked me change before. I added NOISE_CANCEL=0 and WebDAV=1. These produced no change.

Jeff8356, I am using Smultron editor on my Macbook Pro, 10.15.4. I am unable to ping my address 192.168.1.220. I did get something interesting from arp -a:  ? (192.168.1.220) at (incomplete) on en0 ifscope [ethernet]. I have my mac addr set as ec:21:e5:36:7a:e8 from back of SD CARD.
Post Reply Post Reply
#14
RE: FlashPAP - FlashAir WiFi SD card utility
Another thought; Each time you edit the CONFIG file, the "APPNETWORKKEY=" will display asterisks (****). You must re-enter your password each time you edit this file or your password will be the asterisks.
Crimson Nape
Apnea Board Moderator
www.ApneaBoard.com
___________________________________
Useful Links -or- When All Else Fails:
OSCAR Chart Organization
Attaching Images and Files on Apnea Board
Beginner's Guide to Sleepyhead and OSCAR
Apnea Helpful Tips

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply






Donate to Apnea Board  
#15
RE: FlashPAP - FlashAir WiFi SD card utility
I changed my editor to end lines with CRLF. Still no good.

(06-08-2020, 06:03 AM)Crimson Nape Wrote: Another thought; Each time you edit the CONFIG file, the "APPNETWORKKEY=" will display asterisks (****).  You must re-enter your password each time you edit this file or your password will be the asterisks.

My password has never changed to *******, still displayable PW.
Post Reply Post Reply
#16
RE: FlashPAP - FlashAir WiFi SD card utility
How far away are you from your access point?
Crimson Nape
Apnea Board Moderator
www.ApneaBoard.com
___________________________________
Useful Links -or- When All Else Fails:
OSCAR Chart Organization
Attaching Images and Files on Apnea Board
Beginner's Guide to Sleepyhead and OSCAR
Apnea Helpful Tips

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#17
RE: FlashPAP - FlashAir WiFi SD card utility
About 4 feet when it's in my computer, where it is now.
Post Reply Post Reply






Donate to Apnea Board  
#18
RE: FlashPAP - FlashAir WiFi SD card utility
OK, does your Access point have a bandwidth selector (20 and/or 40 MHz) option?  The FlashAir needs the 20 MHz bandwidth.  Other than a FlashAir, most 2.4 GHz Wi-Fi devices use the 40 MHz bandwidth for a higher throughput.

Update:
It bothered me that your password was not being encrypted. I went back and looked at my FlashAir using both Windows7 and Linux. Both had the password encrypted. This non-encryption has me "concerned" (for lack of a better word this morning).
Crimson Nape
Apnea Board Moderator
www.ApneaBoard.com
___________________________________
Useful Links -or- When All Else Fails:
OSCAR Chart Organization
Attaching Images and Files on Apnea Board
Beginner's Guide to Sleepyhead and OSCAR
Apnea Helpful Tips

INFORMATION ON APNEA BOARD FORUMS OR ON APNEABOARD.COM SHOULD NOT BE CONSIDERED AS MEDICAL ADVICE. ALWAYS SEEK THE ADVICE OF A PHYSICIAN BEFORE SEEKING TREATMENT FOR MEDICAL CONDITIONS, INCLUDING SLEEP APNEA. INFORMATION POSTED ON THE APNEA BOARD WEB SITE AND FORUMS ARE PERSONAL OPINION ONLY AND NOT NECESSARILY A STATEMENT OF FACT.
Post Reply Post Reply
#19
RE: FlashPAP - FlashAir WiFi SD card utility
I do not see bandwidth (20 / 40) selector in any of my menus for router. I'm thinking that my password never gets set to ******s because it has never been accessed.

The mac addr being marked incomplete seems significant to me, but I must admit I don't know what that means. Something about arp sending something to IP, but not getting a mac addr response? After a time it is removed from the arp table. This is exactly what I am seeing. arp -a shows my 192.168.1.220 IP with imcomplete, then a little later it is gone.
Post Reply Post Reply
#20
RE: FlashPAP - FlashAir WiFi SD card utility
For some reason your network is not recognizing the mac address of the card.  
Is there a setting in your router to "Only allow certain Mac addresses" or "certain computers" or something similar?

I'm not familiar with the editor you mentioned, I use BBedit (formerly TextWrangler).  Any chance it left some unintended whitespace behind in the config file?  Or "autocorrected" something it shouldn't have?
Using a 13" MacBook Air (2017), MacOS Catalina (10.15.7), OSCAR v1.2.0
In a VM: Win10 1909 (18363.836)

Installing OSCAR on a Mac
Organizing your OSCAR charts
Attaching images and files for the forum
OSCAR Help
OSCAR Data Interpretation
Post Reply Post Reply






Donate to Apnea Board  


Possibly Related Threads...
Thread Author Replies Views Last Post
  FlashAir tests [failure and success] Jeff8356 1 54 10-22-2020, 04:09 PM
Last Post: Crimson Nape
  64Gb FlashAir WiFi Setup Problems [Guy] GuyScharf 16 557 09-10-2020, 04:01 PM
Last Post: Crimson Nape
Cool Recommendation: FlashAir and Flashpap - Wifi data transfer from CPAP to PC/Sleepyhead mogulman 38 6,155 09-07-2020, 06:09 PM
Last Post: Bobaloo
  [split] Plots missing - summary data only - snoringgiraffe snoringgiraffe 17 296 07-28-2020, 02:22 PM
Last Post: GuyScharf
  FlashAir Mapped to Drive OSCAR Can't See Network ResidentSleeper 5 230 07-07-2020, 08:11 AM
Last Post: Crimson Nape
  FlashPAP - FlashAir WiFi SD card utility TiredToo 292 69,791 06-12-2020, 11:47 AM
Last Post: Crimson Nape
  importing oximetry in Oscar problems. car54 33 1,727 05-13-2020, 03:50 PM
Last Post: PhoebeAnn


New Posts   Today's Posts






About Apnea Board

Apnea Board is an educational web site designed to empower Sleep Apnea patients.