Post Reply 
treatment pressure higher than the setting pressure
Author Message
PaytonA Offline
Wiki Editor
Monitors

Posts: 3,005
Joined: Dec 2013

Machine: ResMed S9 VPAP Auto
Mask Type: Full face mask
Mask Make & Model: Resmed Mirage Quattro
Humidifier: H5i(distilled-top up)
CPAP Pressure: VAuto MinE14.0 MaxI 20.6 PS4.0
CPAP Software: ResScan SleepyHead

Other Comments:

Sex: Male
Location: Orange County,California

Post: #21
RE: treatment pressure higher than the setting pressure
(03-31-2016 09:02 PM)palerider Wrote:  
(03-31-2016 08:44 PM)PaytonA Wrote:  
(03-31-2016 05:54 PM)palerider Wrote:  it's what you get if you do a 'report', instead of examining the data... threw me too for a bit.

Just ran a report from my version of ResScan and it does not look like what the OP put up.

Best Regards,

PaytonA

I've got 5 something, and tried it the other night, and was able to find something that looked like that part way down one of the report pages.

I've got 5.1.0.8731!
04-01-2016 03:27 PM
Find all posts by this user Post Reply Quote this message in a reply

Donate to Apnea Board
palerider Online

Preferred Members-

Posts: 440
Joined: Nov 2014

Machine: s9 vpap auto
Mask Type: Nasal pillows
Mask Make & Model: p10
Humidifier: none
CPAP Pressure: 18/13+
CPAP Software: SleepyHead

Other Comments:

Sex: Male
Location: Dallas(ish)

Post: #22
RE: treatment pressure higher than the setting pressure
(04-01-2016 03:27 PM)PaytonA Wrote:  I've got 5.1.0.8731!

I've got 5.5.9.9285. if I go into a patient record, click report, pick a date. I get this:
   
(This post was last modified: 04-01-2016 03:59 PM by palerider.)
04-01-2016 03:58 PM
Find all posts by this user Post Reply Quote this message in a reply
PaytonA Offline
Wiki Editor
Monitors

Posts: 3,005
Joined: Dec 2013

Machine: ResMed S9 VPAP Auto
Mask Type: Full face mask
Mask Make & Model: Resmed Mirage Quattro
Humidifier: H5i(distilled-top up)
CPAP Pressure: VAuto MinE14.0 MaxI 20.6 PS4.0
CPAP Software: ResScan SleepyHead

Other Comments:

Sex: Male
Location: Orange County,California

Post: #23
RE: treatment pressure higher than the setting pressure
That splains it. Tanks. Big Grin Big Grin
04-01-2016 07:31 PM
Find all posts by this user Post Reply Quote this message in a reply

Donate to Apnea Board
debby2242 Offline

Members

Posts: 5
Joined: Jan 2016

Machine: Resmed Airsense 10 auto
Mask Type: Nasal mask
Mask Make & Model: Resmed Airfit N10
Humidifier: HumidAirâ„¢ Heated Humidifier
CPAP Pressure: 4-8
CPAP Software: ResScan

Other Comments:

Sex: Female
Location:

Post: #24
RE: treatment pressure higher than the setting pressure
(03-30-2016 11:46 AM)OpalRose Wrote:  debby2242,
Take the time to read through the thread that sonicboom has posted. See his link above.
This must be a known defect, and they should replace your machine.

If the run-away pressure is caused by rainout, you will have to try and fix that. Are you using a heated hose? You can also try a hose cover, and be sure the machine is lower than your head. This way any moisture/water that gets in hose would flow back to humidifier.

Dear OpalRose

Thank you for your suggestion. I have read through the thread that sonicboom has posted. I use the heated hose, and the Tube Temperature is 82 (F) . I can make sure that the tube is almost dry all night. So maybe I have to inform the Resmed dealer and ask them to replace the machine....

Thanks for your help
(This post was last modified: 04-03-2016 11:29 AM by debby2242.)
04-03-2016 11:23 AM
Find all posts by this user Post Reply Quote this message in a reply
sonicboom Offline

Advisory Members

Posts: 472
Joined: May 2015

Machine: Airsense 10 AutoSet
Mask Type: Nasal pillows
Mask Make & Model: ResMed AirFit P10, Dreamwear
Humidifier: Integrated
CPAP Pressure: 4.6-7.6
CPAP Software: ResScan SleepyHead

Other Comments:

Sex: Male
Location: Washington

Post: #25
RE: treatment pressure higher than the setting pressure
(04-03-2016 11:23 AM)debby2242 Wrote:  
(03-30-2016 11:46 AM)OpalRose Wrote:  debby2242,
Take the time to read through the thread that sonicboom has posted. See his link above.
This must be a known defect, and they should replace your machine.

If the run-away pressure is caused by rainout, you will have to try and fix that. Are you using a heated hose? You can also try a hose cover, and be sure the machine is lower than your head. This way any moisture/water that gets in hose would flow back to humidifier.

Dear OpalRose

Thank you for your suggestion. I have read through the thread that sonicboom has posted. I use the heated hose, and the Tube Temperature is 82 (F) . I can make sure that the tube is almost dry all night. So maybe I have to inform the Resmed dealer and ask them to replace the machine....

Thanks for your help

Turn the climate control to Auto if not already done. If that doesn't help then yes turn it in and see if problem is solved.

Coffee
04-03-2016 01:34 PM
Find all posts by this user Post Reply Quote this message in a reply

Donate to Apnea Board
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Dream Station Ramp and Pressure Settings knowoneuno 15 275 Yesterday 06:50 PM
Last Post: Sleeprider
  [Pressure] How to change pressure - Respironics Solo slgoltz 5 19,961 11-30-2016 06:32 PM
Last Post: randx2
  AHI higher with DreamWear Mask Judy1843 1 146 11-29-2016 08:04 PM
Last Post: sonicboom
  Pressure experiment Dagmar 9 415 11-24-2016 09:58 PM
Last Post: Napmeister
  ResMed Airsense 10 Auto Set...Runaway Pressure Abnormal86 14 518 11-22-2016 11:39 PM
Last Post: sonicboom
  [Equipment] what setting for mask airsense 10 abrun7 1 169 11-17-2016 06:57 PM
Last Post: OpalRose
  new pressure Kendall 2 185 11-17-2016 06:37 PM
Last Post: trish6hundred

Forum Jump:

Who's Online (Complete List)